What Hat Are You Wearing Today ?

[RickP]

Nice hat Rick ! I've got a Key Club that looks very similar except mine has a "pattern" printed on the liner whereas yours looks solid white. Can't see your hatband much but mine has a shark gill treatment on the side... is yours like that too ?
View attachment 655490 View attachment 655491

Mines a smooth white liner and regular ribbon bow, Also mines a raw edge instead of bound edge ( wish mine had it) .. This one looks basically new so I suspect is a fairy recent hat

I have the same Imperial Ultimate felt... super feeling hat. Ive always been of the opinion that in the last several years, Stetson made the same hat with varying felt qualities and trim details and gave them different model names.

Kinda of related , I have a couple that to the eye and feel are identical, but one is a "Royal" and one is a " Royal Deluxe". Also have one hat from early 2000s that has "Royal" on the sweatband, but "Royal Deluxe" on the liner. Always wondered if it was a "late friday afternoon at the factory " hat, or if the current factory has a sliding defination of Royal / Royal Deluxe lol

 

[GHT]

It looks great!!
Well done!!!!

The epitome of sartorial elegance! And that shirt is KILLER!!!!!

Thank you to both of you. It's good to know that the lady's work is much admired. I appreciate that.

 

[RickP]

This morning I'm sporting a Stetson 4X Gambler style hat that I bought for only 45.00 on Ebay. Once again I added a pencil curl brim just because I really like the look. The hat came to me without a hatband so I found what appeared to be a really nice one complete with buffalo head nickels all the way around. Dang shame I paid almost TWICE for the hatband than I did for the hat. I had to re-work the Buffalo head nickel conchos so they didn't stand off the hatband by 1/8 inch or more. ( You can see this in the pictures of the hat. Last pic shows finished results with conchos now sitting tight to the leather hatband) Really wasn't that hard, just opened up the holes in the hatband so the post on the concho could go "through" the hatband and not sit on top of it. Then I had to shorten the screws that go in post on concho so the screw would tighten down and keep the concho from rotating. I spent an hour or so out in my shop making this hatband like it should have been done in the first place. Next thing I did was contact the vendor I bought the hatband from and we had a little conversation about the issue. None of the pictures in her ad showed the conchos sticking out like that. When all was said and done she ended up refunding over 15.00 of price for my trouble. I just can't understand why someone would let a product leave their shop with obvious flaws such as this because the materials used are top notch, the execution not so much.
* sorry to ramble on...just wanted to get that off my chest.

View attachment 655431 View attachment 655432 View attachment 655433 View attachment 655434 View attachment 655435

In my leatherwork Ive used lots of those fake coin conchos with the Chicago Screw Post fasteners. Unless theyre going on a really thick leather, I almost always have to grind off the post and screw to make them fit. Its a pain but still way easier than the old way of doming out real coins and silver soldering a rivet or button loop on the back. Tandy leather was closing them out of their concho line a few years back.... I bought everything I could when they were on clearance. Ive got a big ol box of those in Dollar and quarter sizes (Walking Liberty, Peace Dollars, Morgans) . The Dollar sized ones are almost too big to use on anything but theyre cool lol. Ive used up all my Buffalo nickel ones. Getting ready to dome up some old silver dimes and solder a button loop on the back to use on a leather vest as buttons

 

[TimmyV]

In my leatherwork Ive used lots of those fake coin conchos with the Chicago Screw Post fasteners. Unless theyre going on a really thick leather, I almost always have to grind off the post and screw to make them fit. Its a pain but still way easier than the old way of doming out real coins and silver soldering a rivet or button loop on the back. Tandy leather was closing them out of their concho line a few years back.... I bought everything I could when they were on clearance. Ive got a big ol box of those in Dollar and quarter sizes (Walking Liberty, Peace Dollars, Morgans) . The Dollar sized ones are almost too big to use on anything but theyre cool lol. Ive used up all my Buffalo nickel ones. Getting ready to dome up some old silver dimes and solder a button loop on the back to use on a leather vest as buttons

View attachment 655528

Nice stash !!

 

[rogueclimber]

In my leatherwork Ive used lots of those fake coin conchos with the Chicago Screw Post fasteners. Unless theyre going on a really thick leather, I almost always have to grind off the post and screw to make them fit. Its a pain but still way easier than the old way of doming out real coins and silver soldering a rivet or button loop on the back. Tandy leather was closing them out of their concho line a few years back.... I bought everything I could when they were on clearance. Ive got a big ol box of those in Dollar and quarter sizes (Walking Liberty, Peace Dollars, Morgans) . The Dollar sized ones are almost too big to use on anything but theyre cool lol. Ive used up all my Buffalo nickel ones. Getting ready to dome up some old silver dimes and solder a button loop on the back to use on a leather vest as buttons

View attachment 655528

You have so many great talents and such a broad knowledge base, Bravo!

 

[RickP]

Nice stash !!

By the way... for the ground off screw posts, I always add a spot of epoxy when I screw it together.... 5 min epoxy is fine.... Ive had a little trouble getting threadlocker to hold

 

[RickP]

You have so many great talents and such a broad knowledge base, Bravo!

Thats what happens when youre forced into an early retirement.... I have resurected a lot of old hobbies to keep busy ( The Dog, The Gym, The Banjo, The Mandolin, Socializing at the Coffee shop, Leatherwork, Woodwork, Hats, Gun repair, Smoking pipes, home repair, BBQ, Cocktails on the Patio etc) Never a dull moment or boredom around here

 

[alanfgag]

A confluence of memories...

In the summer of 1972 an eighteen year old me traveled to Europe with my high school girlfriend. We went many places but had a special visit in Como where we took the funiculare up the mountain to Brunate for dinner with family friends. We spent the next day traveling by boat up beautiful Lago di Como.

Our relationship didn't make it through the summer. But on a whim one lonely fall weekend I hitchhiked 650 miles from Buffalo to Evanston, IL to watch her perform in a play at college. It was the last time I saw her.

Imagine the odds of finding a hat with reference to both places so far apart.

 

[Blare]

A confluence of memories...

In the summer of 1972 an eighteen year old me traveled to Europe with my high school girlfriend. We went many places but had a special visit in Como where we took the funiculare up the mountain to Brunate for dinner with family friends. We spent the next day traveling by boat up beautiful Lago di Como.

Our relationship didn't make it through the summer. But on a whim one lonely fall weekend I hitchhiked 650 miles from Buffalo to Evanston, IL to watch her perform in a play at college. It was the last time I saw her.

Imagine the odds of finding a hat with reference to both places so far apart.

View attachment 655599

View attachment 655604

View attachment 655601

View attachment 655600

View attachment 655602

View attachment 655603

Wow. Like it was made for you and this memory.

 

[DonR]

A confluence of memories...

In the summer of 1972 an eighteen year old me traveled to Europe with my high school girlfriend. We went many places but had a special visit in Como where we took the funiculare up the mountain to Brunate for dinner with family friends. We spent the next day traveling by boat up beautiful Lago di Como.

Our relationship didn't make it through the summer. But on a whim one lonely fall weekend I hitchhiked 650 miles from Buffalo to Evanston, IL to watch her perform in a play at college. It was the last time I saw her.

Imagine the odds of finding a hat with reference to both places so far apart.

View attachment 655599

View attachment 655604

View attachment 655601

View attachment 655600

View attachment 655602

View attachment 655603

That is awesome and a great looking hat too.

 

[rogueclimber]

Setting out to dinner as the sun sets

My latest Borsalino to accompany

 

[M Hatman]

Nice hat Rick ! I've got a Key Club that looks very similar except mine has a "pattern" printed on the liner whereas yours looks solid white. Can't see your hatband much but mine has a shark gill treatment on the side... is yours like that too ?
View attachment 655490 View attachment 655491

Mine is like yours, including the shark gill bow, and patterned lining but in a very dark blue. I cannot remember the brim binding or not but the felt is very nice and can be creased with ease......"somewhere around here, there is a picture or two" as they say.
Ps: found one of my posts:https://www.thefedoralounge.com/threads/what-hat-are-you-wearing-today.94860/page-3177#post-2996596