Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Showcase of Non-Indy Federations

Messages
12,017
Location
East of Los Angeles
...I also have a Dark Brown Fed IV, but it has a simple Center Dent crease that's a little too "Indyesque" for this thread. One of these days I'll probably re-crease it, but I haven't gotten around to it yet.
A couple of months after I made that post I finally gave my Dark Brown Fed IV a Diamond crease. I liked it so much that I re-creased my other two Feds as well:

Fed_IV_Triplets_01_zpsweevitbt.jpg

Fed_IV_Triplets_03_zpsagiacysm.jpg


With regards to the Fed IV being a "big" hat, compared to most fedoras from the 1940s and 50s I'd say it's dimensions and proportions are average. It might have a slightly taller crown, but that simply allows the wearer to crease it as high or low as he/she likes.
 

Benzadmiral

Call Me a Cab
Messages
2,815
Location
The Swamp
Resurrecting an old thread as I posted originally in the wrong place (ask a question but couldn't work out how to move it). About to order as my first Akubra a carbon grey Fed IV. Despite reading up through the various threads and having decided to go for the Fed IV, vaguely unsure given all the comments on the proportions / big size, but figure I may as well order to find out! Quite keen on not having the Indy bash, hence this fortuitous and topical thread, albeit 8 years ago; Wish me luck...
The Carbon Gray Fed was the first hat I ordered when I came back to hat wearing about 7 years ago. I'd been reading here and decided like you to take a chance on a hat from the other side of the world. It worked out great (though the hat looks a little lighter in color in these pics):

CG_Fed_01.jpg CG_Fed_02.jpg

I chose the dark gray because I liked the similar hat that William Hurt wears in the early '90s SF film Until the End of the World.
 

Windsock8e

A-List Customer
Messages
472
A couple of months after I made that post I finally gave my Dark Brown Fed IV a Diamond crease. I liked it so much that I re-creased my other two Feds as well:

Fed_IV_Triplets_01_zpsweevitbt.jpg

Fed_IV_Triplets_03_zpsagiacysm.jpg


With regards to the Fed IV being a "big" hat, compared to most fedoras from the 1940s and 50s I'd say it's dimensions and proportions are average. It might have a slightly taller crown, but that simply allows the wearer to crease it as high or low as he/she likes.

That's a great picture. I've been thinking about a diamond or C-crown (is that the same as a teardrop?), but for sure, the diamond looks very interesting. Is their a "how to" thread somewhere here or shall I just search on you tube?

By "Big", I was thinking of the combination of high crown and large(r) brim. I have a contemporary high crown (4.5 inch crown with central bash - sorry if my terminology is off) fedora but with about a 2 inches brim so I guess the Fed IV seems bigger.

On a random parallel, I was on a flight this morning and there were two orthodox gentlemen wearing their black hats. This was handy for 2 reasons:

1) I realised that nowadays, the only way to travel by air with a hat is wearing it on your head or it will be crushed. To put it another way, I can travel with a hat! As we got delayed, I could really study their hats up close; and
2) whilst one of the guys had the "classic" model I usually see (round high porkpie with edge of massive brim curled up), the other younger guy had a fedora bash but maintained the massive brim. It looked like he had done it himself and which I thought was cool and reassured me not to be "afraid" of big brims!

Uh, sorry, my return flight is now delayed so passing the time in Bruxelles airport...
 
Messages
12,017
Location
East of Los Angeles
That's a great picture. I've been thinking about a diamond or C-crown (is that the same as a teardrop?), but for sure, the diamond looks very interesting. Is their a "how to" thread somewhere here or shall I just search on you tube?
There is a difference between a C-Crown and Teardrop, but it's subtle and usually only noticeable when the hat is viewed from the top. Since a picture is worth a thousand words, here are two that should help to show the difference...

Teardrop_C-Crown_zpsumviyymq.jpg
Teardrop_C-Crown_Hats_zpskgpk9e3a.jpg


There are probably a number of threads here that explain how to achieve a particular crease, but the Monster Bash Videos ... show us how you bash!! thread is a good place to start.

The Fed IV has a dimensional brim--2-1/2" wide on the sides, 2-3/4" front and back. If you're used to wearing hats with a 2" brim that extra width can be a little daunting...at first, anyway. But once you get used to seeing yourself in a hat with a wider brim you'll stop paying attention to it, and eventually wonder why you ever thought a 2-1/2" brim was "wide".
 

Art Hat1

One of the Regulars
Messages
227
Location
Winter Garden, Fl
Okay to resurrect a thread? Gave my moonstone fed 4 deluxe a Bogie style diamond bash and a slight brim trim and I think it came out okay!
 

Attachments

  • 6B46468C-5607-44FB-B958-8E3180758DDF.jpeg
    6B46468C-5607-44FB-B958-8E3180758DDF.jpeg
    1.9 MB · Views: 63
  • 940ED370-2C75-4E2F-83C7-71049B41E130.jpeg
    940ED370-2C75-4E2F-83C7-71049B41E130.jpeg
    1.9 MB · Views: 69
  • 5388E1AC-511A-4C58-B306-E9F349716782.jpeg
    5388E1AC-511A-4C58-B306-E9F349716782.jpeg
    1.4 MB · Views: 67
  • 50E25002-74D1-4F1C-92A4-A1E6E28688CD.jpeg
    50E25002-74D1-4F1C-92A4-A1E6E28688CD.jpeg
    1,018.2 KB · Views: 64
  • 51697A4C-E7EE-49DC-AC93-585A6C023828.jpeg
    51697A4C-E7EE-49DC-AC93-585A6C023828.jpeg
    1.1 MB · Views: 75
  • 90931346-2E63-44D0-AC16-52540EF7ABB6.jpeg
    90931346-2E63-44D0-AC16-52540EF7ABB6.jpeg
    1.1 MB · Views: 67
  • 17FE59A7-BD02-43E9-97F5-B55025CB2D1B.jpeg
    17FE59A7-BD02-43E9-97F5-B55025CB2D1B.jpeg
    1.8 MB · Views: 72

Forum statistics

Threads
109,255
Messages
3,077,393
Members
54,183
Latest member
UrbanGraveDave
Top