Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Rmccamey

I'll Lock Up
Messages
5,867
Location
Central Texas
Lookin' good, Randall. Great recovery.

It was requested to see how this Dunlap turned out so here it is.
Record breaking restoration—time wise, for me anyway.

Not an easy one, since I tried, successfully, to keep it’s 7 1/2 size and original brim and crown measurements. While all the trying to hide the “sweatband scorched” felt caused from leaching of the chemicals used in tanning leather, at least, that’s my guess to explain the mystery.
I’m sure you all have seen or experienced this felt fading phenomenon. You can see how bad and how high it was in the original eBay listing photo below. Very unfortunate, but I had to use a little bit wider ribbon in order to cover the scorching. I so wanted to use the original ribbon as it was a cool color. Ah, but using a burgundy dog eared pleated bow helps allay the disappointment.
And anyway, I’ll can still use the original ribbon on a different hat later.

Doesn’t quite fit, but one day it’ll sell higher than it would’ve had I made it fit me, nevertheless for now, it’ll be one of my favs on windless days.

Will eventually stitch in a homeless Dunlap liner—once I uncover its whereabouts in piles of hat boxes.
View attachment 552170
View attachment 552162 View attachment 552163 View attachment 552165 View attachment 552168



View attachment 552169
 
Messages
18,449
Location
Nederland
It was requested to see how this Dunlap turned out so here it is.
Record breaking restoration—time wise, for me anyway.

Not an easy one, since I tried, successfully, to keep it’s 7 1/2 size and original brim and crown measurements—all the while trying to hide the “sweatband scorched” felt caused from leaching of chemicals used in tanning leather, at least, that’s my guess to explain the mystery.
I’m sure you all have seen or experienced this felt fading phenomenon. You can see how bad and how high it was in the original eBay listing photo below. Very unfortunate, but I had to use a little bit wider ribbon in order to cover the scorching. I so wanted to use the original ribbon as it was a cool color. Ah, but using a burgundy dog eared pleated bow helps allay the disappointment.
And anyway, I’ll can still use the original ribbon on a different hat later.

Doesn’t quite fit, but one day it’ll sell higher than it would’ve had I made it fit me, nevertheless for now, it’ll be one of my favs on windless days.

Will eventually stitch in a homeless Dunlap liner—once I uncover its whereabouts in piles of hat boxes.
View attachment 552170
View attachment 552162 View attachment 552163 View attachment 552165 View attachment 552168



View attachment 552169
Super work again, Randall and a cool find.
 
Messages
11,714
Wow..what a fantastic job Randall. a great looking hat!
It was requested to see how this Dunlap turned out so here it is.
Record breaking restoration—time wise, for me anyway.

Not an easy one, since I tried, successfully, to keep it’s 7 1/2 size and original brim and crown measurements—all the while trying to hide the “sweatband scorched” felt caused from leaching of chemicals used in tanning leather, at least, that’s my guess to explain the mystery.
I’m sure you all have seen or experienced this felt fading phenomenon. You can see how bad and how high it was in the original eBay listing photo below. Very unfortunate, but I had to use a little bit wider ribbon in order to cover the scorching. I so wanted to use the original ribbon as it was a cool color. Ah, but using a burgundy dog eared pleated bow helps allay the disappointment.
And anyway, I’ll can still use the original ribbon on a different hat later.

Doesn’t quite fit, but one day it’ll sell higher than it would’ve had I made it fit me, nevertheless for now, it’ll be one of my favs on windless days.

Will eventually stitch in a homeless Dunlap liner—once I uncover its whereabouts in piles of hat boxes.
View attachment 552170
View attachment 552162 View attachment 552163 View attachment 552165 View attachment 552168



View attachment 552169
 

hambone71

Practically Family
Messages
690
Location
Roll Tide
It was requested to see how this Dunlap turned out so here it is.
Record breaking restoration—time wise, for me anyway.

Not an easy one, since I tried, successfully, to keep it’s 7 1/2 size and original brim and crown measurements—all the while trying to hide the “sweatband scorched” felt caused from leaching of chemicals used in tanning leather, at least, that’s my guess to explain the mystery.
I’m sure you all have seen or experienced this felt fading phenomenon. You can see how bad and how high it was in the original eBay listing photo below. Very unfortunate, but I had to use a little bit wider ribbon in order to cover the scorching. I so wanted to use the original ribbon as it was a cool color. Ah, but using a burgundy dog eared pleated bow helps allay the disappointment.
And anyway, I’ll can still use the original ribbon on a different hat later.

Doesn’t quite fit, but one day it’ll sell higher than it would’ve had I made it fit me, nevertheless for now, it’ll be one of my favs on windless days.

Will eventually stitch in a homeless Dunlap liner—once I uncover its whereabouts in piles of hat boxes.
View attachment 552170
View attachment 552162 View attachment 552163 View attachment 552165 View attachment 552168



View attachment 552169
Beautiful restoration job! I may have to enlist your skills on a project hat of mine.
 

Randall Renshaw

My Mail is Forwarded Here
Messages
3,102
Location
Nahunta, Ga.
Thanks for the compliments, guys!
I’m working on getting a Triple R Hattery logo made for new hats, but I do hope to focus on restorations for now. Once I get everything needed for new hat builds I’ll let you guys know.
Getting my hat business started Randy McCamey @Rmccamey has been a great friend and big encouragement over the years.
Let me know if I can help any of you guys!
Super work again, Randall and a cool find.

Wow..what a fantastic job Randall. a great looking hat!

Beautiful--a HUGE improvement. And looks a bit like my Stetsonian. That is sure is some fancy ribbon work!
;)

Beautiful restoration job! I may have to enlist your skills on a project hat of mine.
 
Messages
11,714
IMG_20231014_163515990_PORTRAIT_Original.jpeg


Disney Hats - Brown Unlined
5 1/2 Crown Open (about 4 1/4 as shaped)
Oil skin crown protector
3/4 Brown Grosgrain Ribbon
2 1/4 Front - 2 1/8 Sides/Back Brim with Raw Edge

This is one of those hats that made me hit the Buy It Now button as fast as lightning. I don’t think I’ve come across an unlined summer weight Disney before and it really called out to me. In hand it has lived up to my hopes… except maybe the brim is a tad shorter than I my expectations. I suspect it is possible it met up with a rounding jack for a brim trim at sometime in its history. The brim is slightly dimensional at 2 1/4 to the front and 2 1/8 on the sides and rear. The crown is still nice and tall reaching 5 1/2 open. With its 3/4 ribbon it gives it a sort of Playboy vibe.. and I suspect with the proportions it is likely to work it’s way in as a regular in my grab and go pile.

IMG_20231014_163444669_Original.jpeg
IMG_20231014_163505151_PORTRAIT_Original.jpeg
IMG_20231014_163523909_HDR_Original.jpeg
IMG_20231014_163725488_Original.jpeg
IMG_20231014_163653794_Original.jpeg
IMG_20231014_163707951_Original.jpeg
IMG_20231014_163846921_HDR_Original.jpeg
IMG_20231014_163741835_HDR_Original.jpeg
IMG_4836.jpeg
 
Messages
18,449
Location
Nederland
New entries in the hat collection (I'm well over an intervention, but I'm not saying).

Brummel's Castor fedora in black. Size 57 with the raw edge brim at 6cm and the crown at 10cm at the center dent. Weighs 117 grams. Never seen a Brummel's Castor before so I had to get this one. Well made hat but nothing spectacular. Liner went missing.

brummels castor_1.jpg
brummels castor_2.jpg
brummels castor_3.jpg
brummels castor_4.jpg
brummels castor_5.jpg
brummels castor_6.jpg
brummels castor_7.jpg
brummels castor_8.jpg
brummels castor_9.jpg
 
Messages
18,449
Location
Nederland
Next entry.
Joseph E Ward homburg in black. Size 56 with the bound brim at 6,5cm and the crown at 11cm at the center dent. This one has a contrasting ribbon and binding, but it's hard to say if that was intentional or that they just lost their colour over time. I like the effect though. Sold by Kioes of Luxembourg. Georges Kioes was the successor of Waldbillig somewhere between 1935 and 1962. So this hat is centrainly before 1962. Late forties or early fifties would be my guess. The brim is still a bit uneven, likely because of the way at was stored.

Waldbillig1913.jpg
ward homburg kioes_01.jpg
ward homburg kioes_02.jpg
ward homburg kioes_03.jpg
ward homburg kioes_04.jpg
ward homburg kioes_05.jpg
ward homburg kioes_06.jpg
ward homburg kioes_07.jpg
ward homburg kioes_08.jpg
ward homburg kioes_09.jpg
 
Messages
18,449
Location
Nederland
Between the last two it's a toss-up really. Let's start with another black hat and put those behind us.
Penn-Craft bowler hat. Size 56 with the bound brim at 4,8cm and the crown at 12cm. Vented in top. I've found more of these over the years, the hats that were imported and pre-war attempts by Stetson to get a place in the crowded European market. Without exception those hats are of excellent quality, as is this one.

penn craft bowl_01.jpg
penn craft bowl_02.jpg
penn craft bowl_03.jpg
penn craft bowl_04.jpg
penn craft bowl_06.jpg
penn craft bowl_07.jpg
penn craft bowl_08.jpg
penn craft bowl_09.jpg
penn craft bowl_10.jpg
 

Steve1857

I'll Lock Up
Messages
8,866
Location
Denmark
It was requested to see how this Dunlap turned out so here it is.
Record breaking restoration—time wise, for me anyway.

Not an easy one, since I tried, successfully, to keep it’s 7 1/2 size and original brim and crown measurements—all the while trying to hide the “sweatband scorched” felt caused from leaching of chemicals used in tanning leather, at least, that’s my guess to explain the mystery.
I’m sure you all have seen or experienced this felt fading phenomenon. You can see how bad and how high it was in the original eBay listing photo below. Very unfortunate, but I had to use a little bit wider ribbon in order to cover the scorching. I so wanted to use the original ribbon as it was a cool color. Ah, but using a burgundy dog eared pleated bow helps allay the disappointment.
And anyway, I’ll can still use the original ribbon on a different hat later.

Doesn’t quite fit, but one day it’ll sell higher than it would’ve had I made it fit me, nevertheless for now, it’ll be one of my favs on windless days.

Will eventually stitch in a homeless Dunlap liner—once I uncover its whereabouts in piles of hat boxes.
View attachment 552170
View attachment 552162 View attachment 552163 View attachment 552165 View attachment 552168



View attachment 552169
Great job, buddy. Randall the Resurrector strikes again!
 

Steve1857

I'll Lock Up
Messages
8,866
Location
Denmark
Last one (and then I'm off for my brother's birthday).

Borsalino longhair fedora in Rutenio colour. Size 57 with the overwelt and double stitched brim at 6cm and the crown at 10,5cm at the center dent. Cellophane covering of the liner and it's a no brainer.
What can I say? It's a beauty.

View attachment 552422 View attachment 552423 View attachment 552424 View attachment 552425 View attachment 552426 View attachment 552427 View attachment 552428 View attachment 552429 View attachment 552430 View attachment 552431
Some great new finds, Stefan. The Borsa is a beaut.
 

Rmccamey

I'll Lock Up
Messages
5,867
Location
Central Texas
I'm with you, Stefan, the "bronze" and black is a very nice combination. I may have to copy that on a custom hat some day.

Next entry.
Joseph E Ward homburg in black. Size 56 with the bound brim at 6,5cm and the crown at 11cm at the center dent. This one has a contrasting ribbon and binding, but it's hard to say if that was intentional or that they just lost their colour over time. I like the effect though. Sold by Kioes of Luxembourg. Georges Kioes was the successor of Waldbillig somewhere between 1935 and 1962. So this hat is centrainly before 1962. Late forties or early fifties would be my guess. The brim is still a bit uneven, likely because of the way at was stored.

View attachment 552403 View attachment 552404 View attachment 552405 View attachment 552406 View attachment 552407 View attachment 552408 View attachment 552409 View attachment 552410 View attachment 552411 View attachment 552412

My heart skips a beat! I don't remember seeing a vented Penn Craft before. A smashing hat, indeed! I don't know what Stetson was doing in the 30s and 40s, and I can find precisely little on the history of Penn Craft, but those are very well constructed hats and every one with a silky smooth finish. We may have to make a deal, Stefan...hint, hint!

Between the last two it's a toss-up really. Let's start with another black hat and put those behind us.
Penn-Craft bowler hat. Size 56 with the bound brim at 4,8cm and the crown at 12cm. Vented in top. I've found more of these over the years, the hats that were imported and pre-war attempts by Stetson to get a place in the crowded European market. Without exception those hats are of excellent quality, as is this one.

View attachment 552413 View attachment 552414 View attachment 552415 View attachment 552416 View attachment 552417 View attachment 552418 View attachment 552419 View attachment 552420 View attachment 552421
 
Last edited:
Messages
18,449
Location
Nederland
Some great new finds, Stefan. The Borsa is a beaut.
Thank you, Steve. Whenever I can still find them like that, I'm happy.

I'm with you, Stefan, the "bronze" and black is a very nice combination. I may have to copy that on a custom hat some day.



My heart skips a beat! I don't remember seeing a vented Penn Craft before. A smashing hat, indeed! I don't know what Stetson was doing in the 30s and 40s, and I can find precisely little on the history of Penn Craft, but those are very well constructed hats and every one with a silky smooth finish. We may have to make a deal, Stefan...hint, hint!
Thanks, Randy. Always open for a deal, Randy, but it won't do you any good in this case I think: this one is solid size 56.
 

Rmccamey

I'll Lock Up
Messages
5,867
Location
Central Texas
Thank you, Steve. Whenever I can still find them like that, I'm happy.


Thanks, Randy. Always open for a deal, Randy, but it won't do you any good in this case I think: this one is solid size 56.
Yes, I saw the size was small for me and I've been crying about it all morning :(

I have been trying to gently motivate Phil @hambone71 into his first bowler. All I can say, Phil, is if I could only have one bowler, this would be the one!

Maybe I'm being too subtle; PHIL, talk to Stefan ASAP! Get this bowler!!!!!!
 
Last edited:

Steve1857

I'll Lock Up
Messages
8,866
Location
Denmark
Yes, I saw the size was small for me and I've been crying about it all morning :(

I have been trying to gently motivate Phil @hambone71 into his first bowler. All I can say, Phil, is if I could only have one bowler, this would be the one!

Maybe I'm being too subtle; PHIL, talk to Stefan ASAP! Get this bowler!!!!!!
It's unfortunate for Stefan that that Penn-Craft isn't our size, Randy. If it were, we'd be in a bidding war :)

Phil @hambone71 listen to Randy!
 

Rmccamey

I'll Lock Up
Messages
5,867
Location
Central Texas
I agree, Steve. I'm going to have to set an alarm on my computer to alert me when Stefan posts! Either that or he is going to have to start finding two identical hats at the same time, one for each of us!

It's unfortunate for Stefan that that Penn-Craft isn't our size, Randy. If it were, we'd be in a bidding war :)

Phil @hambone71 listen to Randy!
 

Forum statistics

Threads
109,255
Messages
3,077,394
Members
54,183
Latest member
UrbanGraveDave
Top