Post New Hats Here!

[StoryPNW]

Fantastic

Thank you, the Shudde Bros. looks petty much identical to an OR just with a different ribbon, but it's just marked as a 3X.

 

[Mighty44]

I pulled two Stetsons out of the freezer today, one medium vintage, one modern.

First up is a Shudde Bros. (60s?) with a three cord ribbon. It has a little discoloration right above the knot on the crown but is in good shape overall.
View attachment 458580
View attachment 458579
View attachment 458582
The other is a modern Stetson Weekender in sage. I don't like it as much as I had hoped. Its a little rough but not terrible.
View attachment 458583
View attachment 458584

Great Shudde Bros. Are you going to keep the cattleman crease?

 

[StoryPNW]

Great Shudde Bros. Are you going to keep the cattleman crease?

Thank you! For now I'm going to, I have a Fedora bash on my OR so I plan to keep this one as is.

 

[Blare]

Thank you, the Shudde Bros. looks petty much identical to an OR just with a different ribbon, but it's just marked as a 3X.

Yeah… I think for the most part hats of that era marked OR would have the standard OR ribbon. For my money though I think the tri-cord a bit of an upgrade. Great hat.

 

[Daniele Tanto]

I have slowed down a lot my presence on the Italian and European hat market, every now and then I find something that particularly interests me

I have a Barbisio hat of the same color with a very slight difference in the finish of the felt. I don't wear this much because it's a little too wide for my head size, so I thought I'd get this one

Barbisio Sportex size 6 1/2 or 60 centimeters is equivalent to 7 1/2 in the USA.
Manufactured in the historic factory of Sagliano Micca before the early 1980s with the great skill and degree of finish that characterized Barbisio production.

"Ratinè" is the finish of the felt and "Lido" the deep blue color of the same, the ribbon is in perfect match with the deep blue color.
The other day, presenting it worn, I had made a bad translation of the term "Ratiné" so this morning I contacted a very dear friend who is an expert in fabrics who gave me the precise indications on the finish.

Ratiné French word is "Long-haired wool or fur fabric" In the textile industry, machine used for napping fabrics, essentially consisting of a metal notch and a movable table which with different movements (rectilinear, circular, oscillating) gives the fabric, which passes under pressure , the various ratinating effects.

These are the measures of the Barbisio: the brims are 6.5 cm long, the open crown is 14.5cm and the ribbon is 4cm.
It came in great shape and made me happy

I love blue hats

 

[Snowman]

The good: I just got this hat that I think is the most beautiful hat I own. I’ve never liked brown hats much but this color combo just blew me away. I also have always wanted a 1940s Resistol non-Western fedora ala the Bogie ads. It’s a beautiful thing, fits perfectly (self-conforming!) and, married to a Kansas girl, gets extra points from me for hailing from the sunflower state.

View attachment 458234
View attachment 458236 View attachment 458237 View attachment 458239 View attachment 458240
The bad: heavy mothing. When I first started lurking on the FL I thought guys posting photos of themselves in moth eaten hats looked nuts. And now I’m one of them. Numerous divots on the crown and top of brim.
View attachment 458243
The ugly: total carnage on the bottom of the brim, shown here in raking light to bring out the damage.
View attachment 458241

When all is said and done it’s a gorgeous beater I will proudly wear around the neighborhood and out to a bar and not have to worry about keeping it pristine.

But if you see another one like this in 7 1/8–be sure and let me know!

David

I have a Resistol Regent (similar, I think, to the Monarch) and I love the way it fits.

 

[Mighty44]

I have a Resistol Regent (similar, I think, to the Monarch) and I love the way it fits.

Agreed, an extremely comfortable hat. And here I thought the self-conforming thing was just an empty slogan.

 

[deadlyhandsome]

7 3/8 Borsalino thin ribbon:

More in the Borsalino Brotherhood thread.

 

[The Shoe]

7 3/8 Borsalino thin ribbon:

View attachment 459080 View attachment 459081

More in the Borsalino Brotherhood thread.

Love the look of that one.

 

[steur]

7 3/8 Borsalino thin ribbon:

View attachment 459080 View attachment 459081

More in the Borsalino Brotherhood thread.

Gorgeous hat and a nice find, Brent.

 

[Pellie]

New Borsalino in grey. Extremely soft felt, but a small brim of 5cm. I prefer a little wider and i think this doesn't suit me very well. But the hat is cool

 

[Steve1857]

New Borsalino in grey. Extremely soft felt, but a small brim of 5cm. I prefer a little wider and i think this doesn't suit me very well. But the hat is cool View attachment 459632 View attachment 459633 View attachment 459634 View attachment 459635 View attachment 459636 View attachment 459637 View attachment 459638 View attachment 459639 View attachment 459640

Cool sweatband, Marcel. Love it has a wind trolley.

 

[Pellie]

Cool sweatband, Marcel. Love it has a wind trolley.

Thanks, yes the wind trolley is nice. But i wish the brim was a littlebit wider.

 

[Blare]

Carlos Santana “Panama”
Two-tone straw weave
4 3/4 Crown - just over 2 inch brim
Fancy Liner and Sweatband Art

Every so often I’ve seen a lounger with one of these Carlos Santana hats with the super cool sweatband art and it really peaked my interest. I’ve kept my eye out for some time… but rarely do I find a CS that isn’t either fabric sweat.. or if it does have the cool leather sweat… the hat itself is just too far “out there” for me. And looking new… no luck either. Finally I came across this one in a style I am very comfortable with… that the seller made a very fair offer on.

So… here is the verdict. The leather sweat.. I believe is real at least as far as in say modern Hatco sweats are real leather. I’m sure it is probably made of that same stuff that might disintegrate under heavy use. As such I do not intend to use in that fashion. Either way.. the art is debossed into the band itself and not simply airbrushed. Which I think is nice. If this were a tighter hat on my noggin it might leave imprint. In addition to the sweat.. this one includes a quite fabulous liner. Not sure if it qualifies as a Lovely Liner.. but expect a post there. At some point it will likely get a new hat band.. ribbon or such. But for now… I’m quite happy with it as is. Absolutely love the straw colors.

What can I say?? “Oye Como Va”

 

[deadlyhandsome]

An unusual Stetson 4X beaver from…maybe the late 1960s? The same six-cord ribbon on the crown is also sewn to the underside of the brim.

 

[Frank Boskovich]

Couple hats I’m currently working on. Wait til you see the belly with the trim. Still haven’t decided what shape yet. Cheers Mates!

 

[Frank Boskovich]

View attachment 459919

Carlos Santana “Panama”
Two-tone straw weave
4 3/4 Crown - just over 2 inch brim
Fancy Liner and Sweatband Art

Every so often I’ve seen a lounger with one of these Carlos Santana hats with the super cool sweatband art and it really peaked my interest. I’ve kept my eye out for some time… but rarely do I find a CS that isn’t either fabric sweat.. or if it does have the cool leather sweat… the hat itself is just too far “out there” for me. And looking new… no luck either. Finally I came across this one in a style I am very comfortable with… that the seller made a very fair offer on.

So… here is the verdict. The leather sweat.. I believe is real at least as far as in say modern Hatco sweats are real leather. I’m sure it is probably made of that same stuff that might disintegrate under heavy use. As such I do not intend to use in that fashion. Either way.. the art is deposed into the band itself and not simply airbrushed. Which I think is nice. If this were a tighter had on mi noggin it might leave imprint. In addition to the sweat.. this one includes a quite fabulous liner. Not sure if it qualifies as a Lovely Liner.. but expect a post there. At some point it will likely get a new hat band.. ribbon or such. But for now… I’m quite happy with it as is. Absolutely love the straw colors.

What can I say?? “Oye Como Va”

View attachment 459920 View attachment 459921 View attachment 459922 View attachment 459923 View attachment 459924 View attachment 459925 View attachment 459926 View attachment 459927 View attachment 459928

Wow that sweat bands amazing!!

 

[Blare]

Couple hats I’m currently working on. Wait til you see the belly with the trim. Still haven’t decided what shape yet. Cheers Mates!

Looking good!

 

[Blare]

Wow that sweat bands amazing!!

Thanks.. Like nothing really I’ve come across.

 

[Pellie]

Stetson open road 3x quality with 'the last drop' liner. The spots on the vilt is just water/steam to get this badboy in shape