Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Five Star Leather Jackets

Hobbes1

A-List Customer
Messages
392
I went a little nuts with Vaseline this afternoon. These are Shawn's conic goat and seal goatskin after applying a coat of Vaseline. The shine stays and the grains are showing through. Although I am not sure what the long term effect is. I apply Vaseline on a bunch of my jackets ranging from Shinki, Vicenza to Shawn's goatskin, the common effect is the shine and leather have gotten softer. It did wonders for bulky seams.

View attachment 395599
View attachment 395600

Fingers crossed but I think Vaseline might be the answer for the stiffy CHL...
Looks great! How does that conic color compare to the tan CHL in real life? Similar?
Are the conic and seal both topcoated or dyed through? Thanks!
 

Canuck Panda

I'll Lock Up
Messages
4,709
My ADHD kicked into hyperdrive…
Ran out of the Vaseline, will get another jar tomorrow. Only Vaseline half of the jacket so it’d be interesting to see how soft it can get by comparison, tomorrow.
C06EAEB6-EA41-4070-961B-0367B085F26E.jpeg
4EF7F9F7-F5F4-4331-9E93-F75C96DA0211.jpeg
 

Canuck Panda

I'll Lock Up
Messages
4,709
Looks great! How does that conic color compare to the tan CHL in real life? Similar?
Are the conic and seal both topcoated or dyed through? Thanks!
The conic goat is dyed through. Seal I’m not sure it shows reddish grey under the seal color.
CHL is more leather for the money. I’ll need to Vaseline the tan CHL to see how it turns out though. The conic goat looks better than the tan CHL now only because it already had the Vaseline treatment.
A6C92B61-8A18-4F50-A3B9-B4F060B9B005.jpeg
 

Dumpster Diver

Practically Family
Messages
952
Location
Ontario
Fivestar makes a B-6 Type flight helmet?

has anyone got any detail photos or reviews about these?

Also the fivestar site has a B-3 'Mixed batch' looking jacket, anyone have any more info about these jackets?
 

Canuck Panda

I'll Lock Up
Messages
4,709
For the first generation Tan CHL, Vaseline treatment works (so far). Check out the Vaselined sleeve on the right vs the non-vaselined on the left. Those who have this Tan CHL leather know there is no way it can stay bunched like the one on the right without springing back to the left immediately (like rubber). I will do up the whole jacket when I get more vaseline today. However, I do not know the long term effects of using vaseline. Will post in a year or two.
IMG_9603.jpg

The dark brown CHL, however, still springs back like rubber. It seems there is a thicker coat of pigment on top preventing the vaseline to go into the leather as fast as the Tan version, or could be the brown one is about 0.5mm thicker. Regardless, I will continue to stuff this one with Vaseline until it longer behave like rubber armor.

IMG_9604.jpg

From what I read on the internet, Vaseline "destroy" leather fibers by creating a thin layer on top and trapping moisture inside. And that moisture is what "rots" the leather fiber. And once the leather fibers gets destroyed, the leather will not hold shape and feel mushy.
This sounds very bad, for leather jackets, but seems like an option for my existing CHL jackets. This is really uncharted territory. Taking it slow and a one step at a time...
 

PilotJens

A-List Customer
Messages
342
I don't think the internet theorie is correct.

What I learned about leather is that it is pH sensitive and raw conditioners are not good .

Natural oils will rot and oxidise which will destroys the leather. Leather cleaners and oils with the wrong pH can throw of the pH of the leather so much that is will turn back into flesh .The "aging" on leather is actually the leather that has started to deteriorate because of sun radiation and pH shifting .


Now some old leather types can handle natural raw oils because the base hide is made with a pH that gets leveled with the raw oil .
So you can have a cxl Horween leather that has mink oil as a soft oil and a chl that has synthetic thin oils in it behaves exactly the same in texture,look,feel but they can require way different conditioners.

I generally use leather milks because they have the right pH .

There are chemical leather softeners out there which I think destroy a little bit of the collagen to make it softer .I would give that a try .

I would also buy a synthetic boot oil and drench it in that . Vaseline is petroleum yelli so I don't think the rotting and oxidizing will be a problem .You might accelerate the aging on your hide but considering the stiffness that might not be of any concern
 

Canuck Panda

I'll Lock Up
Messages
4,709
I don't think the internet theorie is correct.

What I learned about leather is that it is pH sensitive and raw conditioners are not good .

Natural oils will rot and oxidise which will destroys the leather. Leather cleaners and oils with the wrong pH can throw of the pH of the leather so much that is will turn back into flesh .The "aging" on leather is actually the leather that has started to deteriorate because of sun radiation and pH shifting .


Now some old leather types can handle natural raw oils because the base hide is made with a pH that gets leveled with the raw oil .
So you can have a cxl Horween leather that has mink oil as a soft oil and a chl that has synthetic thin oils in it behaves exactly the same in texture,look,feel but they can require way different conditioners.

I generally use leather milks because they have the right pH .

There are chemical leather softeners out there which I think destroy a little bit of the collagen to make it softer .I would give that a try .

I would also buy a synthetic boot oil and drench it in that . Vaseline is petroleum yelli so I don't think the rotting and oxidizing will be a problem .You might accelerate the aging on your hide but considering the stiffness that might not be of any concern

I just want to make it less rubber bouncy and more leather crease-y and mold-able-y. The Vaseline did the trick on the tan but the dark brown is work in progress. one for two isn't bad for a weekend's work.
 

EvilMerlin

New in Town
Messages
10
Fivestar makes a B-6 Type flight helmet?

has anyone got any detail photos or reviews about these?

Also the fivestar site has a B-3 'Mixed batch' looking jacket, anyone have any more info about these jackets?

Yep, I have one. They are decently made, and fairly accurate to the originals. I will post some images later today...
 

EvilMerlin

New in Town
Messages
10
New B-3 from Five Star. Got it quickly, about 10 days after ordering.

Mine is the seal brown with horsehide facings, in XL, because the jacket was always worn over heavy clothing for warmth.

The jacket MUST be broken in, but thats a good thing and the way it is supposed to be.

It is INCREDIBLY warm, you can see why these were worn on B-17's, B-24's, B-25's and on and on. Because they work.

Historical accuracy? Honestly probably a 8 out of 10. Stiches and materials are fairly close to traditional. Eastman quality? Probably not, but not a huge step away from it. And shipped to me it was "only" 720 dollars total.


UkOaQ40l.jpg


1dJfKrIl.jpg


kUzkfXzl.jpg


WawPXPnl.jpg
 

Hobbes1

A-List Customer
Messages
392
This might be the one I get. Shawn told me today that this is the "Conic Glazed and after that waxed distress". I know that the FiveStar website pictures leave something to be desired....but this seems like pretty nice looking color. Leather is goatskin, 1.2mm thick. Anyone have direct experience with the Conic Glaze hide?

upload_2022-1-17_10-40-26.png


These Horse Hides also look really nice and I didn't see them the last time I looked on the website. Anyone with direct experience to the circled ones?

upload_2022-1-17_10-50-50.png
 
Last edited:

EvilMerlin

New in Town
Messages
10
This might be the one I get. Shawn told me today that this is the "Conic Glazed and after that waxed distress". I know that the FiveStar website pictures leave something to be desired....but this seems like pretty nice looking color. Leather is goatskin, 1.2mm thick. Anyone have direct experience with the Conic Glaze hide?

View attachment 395945

These Horse Hides also look really nice and I didn't see them the last time I looked on the website. Anyone with direct experience to the circled ones?

View attachment 395947
I can only speak for the horsehide arms on my B-3 and its GOOD leather. Tough, but pliant. Will still need time to break in.
 

Forum statistics

Threads
109,256
Messages
3,077,436
Members
54,183
Latest member
UrbanGraveDave
Top