Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Five Star Leather Jackets

Marc mndt

I'll Lock Up
Messages
7,327
My trucker finally arrived today. Some quick first impression thoughts. I’m really really happy with how it turned out! Measurements worked out and the fit is like I wanted it. The premium seal goat exceeded my expectations! Really thick and sturdy and nice grain. Solid straight stitching.
Only downside would be that when it’s buttoned there is some excess material in the back around the waist as you can see on the picture below. I only gave pit to pit and hem measurements, to avois this I probably should have given waist measurements as well. But I don’t think it’s that bad. I can absolutely live with it. What do you guys think?

First two pics buttoned.

View attachment 297746 View attachment 297747

Unbuttoned

View attachment 297748 View attachment 297749
It looks absolutely great. Congrats. Spot on sleevelength as well, that was a good save :)

I think the excess material is a pattern thing, just like with Red Devils smoke jacket.
 

torfjord

Call Me a Cab
Messages
2,796
Location
Sweden
It looks absolutely great. Congrats. Spot on sleevelength as well, that was a good save :)

I think the excess material is a pattern thing, just like with Red Devils smoke jacket.

Thanks, Shawn and his team really did a great job with this one! Yeah, 5 cm longer sleeves would have looked pretty weird.

It could also be a length thing? I specified the length to be just a tiny bit longer than my Wrangler trucker which hits a bit above my behind. This one touches it and with the hem being tight there I think it can create that bunching effect. But to me it’s really a minor issue. It takes the jacket from being 10/10 to 8/10, I still really like it.
 

Pandemic

One Too Many
Messages
1,503
Location
In The Flat Field
^That looks good to me @torfjord I like the extra body length.

Ive been toying with the idea of a springtime jacket in 5*’s reddish brown buffalo suede. I was thinking a bit of a trucker-CR hybrid with a clean front, mandarin collar and snap front closure. I had a sense I’d seen something similar but couldn’t think where .... and then it came to me, hahahah.

CE12571C-FBD9-4C57-B871-B56C830124B8.jpeg
309C444E-1460-448B-885F-C2928C58B305.jpeg
D8BCAC33-09F0-430D-8A68-AA07F12879FC.jpeg
 

Marc mndt

I'll Lock Up
Messages
7,327
It could also be a length thing? I specified the length to be just a tiny bit longer than my Wrangler trucker which hits a bit above my behind. This one touches it and with the hem being tight there I think it can create that bunching effect. But to me it’s really a minor issue. It takes the jacket from being 10/10 to 8/10, I still really like it.
That's indeed a factor as well. Longer jackets with a relatively narrow bottom hem opening will 'land' on the hips which in turn causes a bunching effect. That's what we're seeing here with this FL jacket.
3AD87441-4154-42EF-90C9-8E6E41E69E8A.jpeg

(This fellow lounger's jacket has already been sold on to someone else so I think it's ok to use it as an example. Not my intention to diss anyone's jacket)
 

MrProper

I'll Lock Up
Messages
4,348
Location
Europe
My trucker finally arrived today. Some quick first impression thoughts. I’m really really happy with how it turned out! Measurements worked out and the fit is like I wanted it. The premium seal goat exceeded my expectations! Really thick and sturdy and nice grain. Solid straight stitching.
Only downside would be that when it’s buttoned there is some excess material in the back around the waist as you can see on the picture below. I only gave pit to pit and hem measurements, to avois this I probably should have given waist measurements as well. But I don’t think it’s that bad. I can absolutely live with it. What do you guys think?

First two pics buttoned.

View attachment 297746 View attachment 297747

Unbuttoned

View attachment 297748 View attachment 297749
very cool. you have my envy ;)
I think it's a little too long at the back. Because not buttoned, it fits great. But if you only work with hot water at the back, it should shrink a bit.
 
Messages
17,509
Location
Chicago
My trucker finally arrived today. Some quick first impression thoughts. I’m really really happy with how it turned out! Measurements worked out and the fit is like I wanted it. The premium seal goat exceeded my expectations! Really thick and sturdy and nice grain. Solid straight stitching.
Only downside would be that when it’s buttoned there is some excess material in the back around the waist as you can see on the picture below. I only gave pit to pit and hem measurements, to avois this I probably should have given waist measurements as well. But I don’t think it’s that bad. I can absolutely live with it. What do you guys think?

First two pics buttoned.

View attachment 297746 View attachment 297747

Unbuttoned

View attachment 297748 View attachment 297749
Dude this looks fantastic!! Perfect fit imho. Nicely done!! That goat s surprisingly nice. Sturdy but light. It’s become my favorite leather to wear. Your jacket looks superb!
 

Jin431

Call Me a Cab
Messages
2,912
Location
Bay Area CA
My trucker finally arrived today. Some quick first impression thoughts. I’m really really happy with how it turned out! Measurements worked out and the fit is like I wanted it. The premium seal goat exceeded my expectations! Really thick and sturdy and nice grain. Solid straight stitching.
Only downside would be that when it’s buttoned there is some excess material in the back around the waist as you can see on the picture below. I only gave pit to pit and hem measurements, to avois this I probably should have given waist measurements as well. But I don’t think it’s that bad. I can absolutely live with it. What do you guys think?

First two pics buttoned.

View attachment 297746 View attachment 297747

Unbuttoned

View attachment 297748 View attachment 297749

That looks great! I also think the back looks okay, especially when you wear it unbuttoned. It will also probably be less noticeable when you layer up.

Agree I think it's the waist not being tapered enough and the bottom sweeep resting on your pants that makes the lower back bunch up.

Love how the design transferred well to the goatskin. Hope you get to wear this jacket a lot
 

Jin431

Call Me a Cab
Messages
2,912
Location
Bay Area CA
^That looks good to me @torfjord I like the extra body length.

Ive been toying with the idea of a springtime jacket in 5*’s reddish brown buffalo suede. I was thinking a bit of a trucker-CR hybrid with a clean front, mandarin collar and snap front closure. I had a sense I’d seen something similar but couldn’t think where .... and then it came to me, hahahah.

View attachment 297754 View attachment 297755 View attachment 297753

Not a bad look lol just change the hardware maybe. . .
 

Wardo1974

A-List Customer
Messages
330
I took a day and read this entire thread, 76 pages. Whuh. Ha ha.

I was initially excited about the idea of a customized, inexpensive jacket.

I have been looking for a year for a used Aero that would fit me in the size 46 range and have seen literally nothing. So I wondered if Shawn could do me up a nice cafe racer styled jacket. Essentially the design that is already listed on his site, but with chest pockets, gussets, and a more customized sizing for me - that's it. I basically asked him for a size 46 with wider shoulders, but yet a narrower P2P, with chest pockets and gussets on the back.

He told me this would be $350 USD shipped with his leather selection. Considering his base cafe jacket is 160 this seemed like a big jump for me.

The hangup for me is that I find the leathers he uses all very ordinary. Many of the designs you guys have chosen look wonderful, and ideally suited to the leathers he has on hand. I wanted a tougher, grainy, stiff leather (like horse obviously) to make a jacket from. I have a hard time justifying 350 for a relatively simple cafe style in cowhide, because I can get jackets locally that are a fair bit less money in similar styles. I live in Canada; a short drive from my house is Lusso Leathers, which also makes custom jackets, and they can sell me a cowhide cafe style jacket for $250 USD, custom tailored to my shape. Off the rack in local stores it's possible to find simple cafe style jackets that are around $150-175.

It would seem to me that this buying model has value only if, 1.) You can get a super-duper, unheard-of pattern that's impossible to find anywhere else, yet costs 350 to get it, or 2.) You can ask for a design that comes in a much superior leather than is normally available for 350.

He said he'd be getting horse leather in a few months. If he does, and if it looks awesome, I'll see about a cafe design. Otherwise...I honestly don't see the value. Am I missing something here?
 

red devil

My Mail is Forwarded Here
Messages
3,954
Location
London
I took a day and read this entire thread, 76 pages. Whuh. Ha ha.

I was initially excited about the idea of a customized, inexpensive jacket.

I have been looking for a year for a used Aero that would fit me in the size 46 range and have seen literally nothing. So I wondered if Shawn could do me up a nice cafe racer styled jacket. Essentially the design that is already listed on his site, but with chest pockets, gussets, and a more customized sizing for me - that's it. I basically asked him for a size 46 with wider shoulders, but yet a narrower P2P, with chest pockets and gussets on the back.

He told me this would be $350 USD shipped with his leather selection. Considering his base cafe jacket is 160 this seemed like a big jump for me.

The hangup for me is that I find the leathers he uses all very ordinary. Many of the designs you guys have chosen look wonderful, and ideally suited to the leathers he has on hand. I wanted a tougher, grainy, stiff leather (like horse obviously) to make a jacket from. I have a hard time justifying 350 for a relatively simple cafe style in cowhide, because I can get jackets locally that are a fair bit less money in similar styles. I live in Canada; a short drive from my house is Lusso Leathers, which also makes custom jackets, and they can sell me a cowhide cafe style jacket for $250 USD, custom tailored to my shape. Off the rack in local stores it's possible to find simple cafe style jackets that are around $150-175.

It would seem to me that this buying model has value only if, 1.) You can get a super-duper, unheard-of pattern that's impossible to find anywhere else, yet costs 350 to get it, or 2.) You can ask for a design that comes in a much superior leather than is normally available for 350.

He said he'd be getting horse leather in a few months. If he does, and if it looks awesome, I'll see about a cafe design. Otherwise...I honestly don't see the value. Am I missing something here?

I am surprised he quoted you this much... I think that your reasoning is very sound, and I don't see how you are missing anything.

You can see a few pages back all the pros and cons I had with the smoke (thread has been merged). In your circumstances, I would go local. You will get a perfect fit, and you can avoid any pattern issues such as straight sleeves, baggy back, etc.
 

torfjord

Call Me a Cab
Messages
2,796
Location
Sweden
very cool. you have my envy ;)
I think it's a little too long at the back. Because not buttoned, it fits great. But if you only work with hot water at the back, it should shrink a bit.

Man, you got nothing to be envious about, with all the great fitting jackets in your stable!
I experimented with not buttoning the lowest button, the issue disappeared. This makes me think it’s a combination of two things: 1. The extra 2 cm length compared to the jacket that I used as a template and 2. I probably should’ve added a cm in hem width to account for the thicker leather compared to the denim.

I’m a bit afraid to try hot water, what if it shrinks in width as well as length? It’s already tight enough around the hem. If I decide to risk it, what temperature should the water be?

Dude this looks fantastic!! Perfect fit imho. Nicely done!! That goat s surprisingly nice. Sturdy but light. It’s become my favorite leather to wear. Your jacket looks superb!

Thanks brother! I must say I’m really impressed with 5*, they nailed all the measurements I requested. Laser precision. I’m really happy I went with your recommendation for the seal goat! Thick but light and easy to wear and with plenty of grain. The sleeve creases are already settling in.

That looks great! I also think the back looks okay, especially when you wear it unbuttoned. It will also probably be less noticeable when you layer up.

Agree I think it's the waist not being tapered enough and the bottom sweeep resting on your pants that makes the lower back bunch up.

Love how the design transferred well to the goatskin. Hope you get to wear this jacket a lot

Thanks buddy, me too! I have a feeling I will wear this a lot when it’s warm enough for leather again!
Your comment made me curious so I tried with a sweater under, and it’s a lot less noticeable.
 

Carlos840

I'll Lock Up
Messages
4,944
Location
London
My trucker finally arrived today. Some quick first impression thoughts. I’m really really happy with how it turned out! Measurements worked out and the fit is like I wanted it. The premium seal goat exceeded my expectations! Really thick and sturdy and nice grain. Solid straight stitching.
Only downside would be that when it’s buttoned there is some excess material in the back around the waist as you can see on the picture below. I only gave pit to pit and hem measurements, to avois this I probably should have given waist measurements as well. But I don’t think it’s that bad. I can absolutely live with it. What do you guys think?

First two pics buttoned.

View attachment 297746 View attachment 297747

Unbuttoned

View attachment 297748 View attachment 297749

Looks good to me.
I generally wear mine with the last button undone to avoid the bunching up.
 

MrProper

I'll Lock Up
Messages
4,348
Location
Europe
I experimented with not buttoning the lowest button, the issue disappeared. This makes me think it’s a combination of two things: 1. The extra 2 cm length compared to the jacket that I used as a template and 2. I probably should’ve added a cm in hem width to account for the thicker leather compared to the denim.

I’m a bit afraid to try hot water, what if it shrinks in width as well as length? It’s already tight enough around the hem. If I decide to risk it, what temperature should the water be?

If it works with the bottom button open, then I wouldn't do anything. It will probably subside a little with time anyway.
I always have the bottom button open.
If hot water, then maybe just the marked spot. Of course, there is some risk involved. I would take it as hot as it comes from the line. But only if the dissatisfaction should get too big.
79632DCB-7583-4B5E-AD0D-021236117C7A.jpeg
 

Seb Lucas

I'll Lock Up
Messages
7,562
Location
Australia
I took a day and read this entire thread, 76 pages. Whuh. Ha ha.

I was initially excited about the idea of a customized, inexpensive jacket.

I have been looking for a year for a used Aero that would fit me in the size 46 range and have seen literally nothing. So I wondered if Shawn could do me up a nice cafe racer styled jacket. Essentially the design that is already listed on his site, but with chest pockets, gussets, and a more customized sizing for me - that's it. I basically asked him for a size 46 with wider shoulders, but yet a narrower P2P, with chest pockets and gussets on the back.

He told me this would be $350 USD shipped with his leather selection. Considering his base cafe jacket is 160 this seemed like a big jump for me.

The hangup for me is that I find the leathers he uses all very ordinary. Many of the designs you guys have chosen look wonderful, and ideally suited to the leathers he has on hand. I wanted a tougher, grainy, stiff leather (like horse obviously) to make a jacket from. I have a hard time justifying 350 for a relatively simple cafe style in cowhide, because I can get jackets locally that are a fair bit less money in similar styles. I live in Canada; a short drive from my house is Lusso Leathers, which also makes custom jackets, and they can sell me a cowhide cafe style jacket for $250 USD, custom tailored to my shape. Off the rack in local stores it's possible to find simple cafe style jackets that are around $150-175.

It would seem to me that this buying model has value only if, 1.) You can get a super-duper, unheard-of pattern that's impossible to find anywhere else, yet costs 350 to get it, or 2.) You can ask for a design that comes in a much superior leather than is normally available for 350.

He said he'd be getting horse leather in a few months. If he does, and if it looks awesome, I'll see about a cafe design. Otherwise...I honestly don't see the value. Am I missing something here?

Yes, I think you are probably missing something. Five Stars have a demonstrated ability to please very particular leather jackets aficionados here with their pattern making, quality construction and leather. That alone makes them stand out. Lusso hasn't created even a flicker of interest here. However, it would be very interesting for us to see what they can do - the customer photos on their site don't impress - maybe you can change this.
 

Wardo1974

A-List Customer
Messages
330
Well, I was specifically citing the cafe racer style as my example, not the (pretty great) custom designs. A $350 cafe racer style isn't a draw like a totally one of a kind 5* offering at the same price.
 

torfjord

Call Me a Cab
Messages
2,796
Location
Sweden
If it works with the bottom button open, then I wouldn't do anything. It will probably subside a little with time anyway.
I always have the bottom button open.
If hot water, then maybe just the marked spot. Of course, there is some risk involved. I would take it as hot as it comes from the line. But only if the dissatisfaction should get too big.
View attachment 297869

Got it! Yeah, I will probably just let it be. As I said, minor issue. And it’s not there with the bottom button open.
 

torfjord

Call Me a Cab
Messages
2,796
Location
Sweden
Well, I was specifically citing the cafe racer style as my example, not the (pretty great) custom designs. A $350 cafe racer style isn't a draw like a totally one of a kind 5* offering at the same price.

Tbh, for a cafe racer I would recommend finding a good vintage one. Old Schott, Bates, Brooks, Kehoe racers can be found in good condition at a relatively cheap price. And they look a lot better than the racers that I’ve seen from 5* and what Lusso showcases on their website.
 

Forum statistics

Threads
109,263
Messages
3,077,554
Members
54,221
Latest member
magyara
Top