Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Five Star Leather Jackets

Imuricecreamman

One Too Many
Messages
1,593
All this comparing of deer skins, milled, plated, etc I think is the TFL effect blowing things out of context and proportion again.
@Jin431 ’s jacket looks fantastic, the leather is very nice and the fit is spot on.
I think you guys are overlooking the fact that he paid probably at least eight times less or more than what he would have paid if he had bought a deerskin jacket from any if the makers that 5 star are being compared to: LW, RMC, Thedi, etc.
You can’t pay budget and expect premium, the trade off has to be somewhere.
I think he did extremely well there.
I think Shawn is still feeling his way through our sphere here at TFD and some of his choices when it comes to leather treatment and distressing seems somewhat overdone, but his ability to listen to advice and his willingness to try things people suggest are way beyond any other maker I've read about here (maybe other than Greg Fields, but he operates in a much smaller niche) We asked for non-distressed buffalo, we got non-distressed buffalo, we asked for deerskin, we got deerskin (should have asked for uncorrected in the first place ;) )I totally agree with you, Fonzie, the jacket looks great, and the leather never looked like anything other than deerskin to my eyes. But my point is: Shawn's work will only get better and better along with his leatherofferings.
 
Messages
16,798
All this comparing of deer skins, milled, plated, etc I think is the TFL effect blowing things out of context and proportion again.
@Jin431 ’s jacket looks fantastic, the leather is very nice and the fit is spot on.
I think you guys are overlooking the fact that he paid probably at least eight times less or more than what he would have paid if he had bought a deerskin jacket from any if the makers that 5 star are being compared to: LW, RMC, Thedi, etc.
You can’t pay budget and expect premium, the trade off has to be somewhere.
I think he did extremely well there.

Agreed on all points but...

It's what this forum is about and I'm sure nobody thinks it's a bad/ugly/whatever leather, just that I personally wouldn't want anyone buying something that isn't as advertised. If it's deerskin, all good. If it's something else - not even hinting this is the case, of course, could've used the Storse analogy just as well - then this is a problem and I personally am very grateful place like this still exists, where you can be sure people are going to tell you what exactly are you spending your money on. Especially nowadays where with so many social networks around, every such topic gets diluted with utter superficiality, fueled by advertising machinery that doesn't even want you to know more.

What I mean is, it's not about the price at all but... After all this time wasted on this hobby, I only want to make sure I'm getting what's checking most of the boxes on the list of things important to me. Otherwise, settling down for something that I don't like, just because the jacket was cheap pretty much feels like I ought to just negate everything that I have learned so far.

You can easily get premium quality out of a $200 jacket. There's no rule to it, same as there's no best leather in the world, not by a long shot. Best leather I've handled was on jackets that I got for under a hundred bucks and they weren't that much pricier even when new.
So the more you know...
 

Imuricecreamman

One Too Many
Messages
1,593
Agreed on all points but...

It's what this forum is about and I'm sure nobody thinks it's a bad/ugly/whatever leather, just that I personally wouldn't want anyone buying something that isn't as advertised. If it's deerskin, all good. If it's something else - not even hinting this is the case, of course, could've used the Storse analogy just as well - then this is a problem and I personally am very grateful place like this still exists, where you can be sure people are going to tell you what exactly are you spending your money on. Especially nowadays where with so many social networks around, every such topic gets diluted with utter superficiality, fueled by advertising machinery that doesn't even want you to know more.

What I mean is, it's not about the price at all but... After all this time wasted on this hobby, I only want to make sure I'm getting what's checking most of the boxes on the list of things important to me. Otherwise, settling down for something that I don't like, just because the jacket was cheap pretty much feels like I ought to just negate everything that I have learned so far.

You can easily get premium quality out of a $200 jacket. There's no rule to it, same as there's no best leather in the world, not by a long shot. Best leather I've handled was on jackets that I got for under a hundred bucks and they weren't that much pricier even when new.
So the more you know...
I personally don't feel bad that Carlos pointed this out in the first place and I don't feel it diminshes Jin's jacket at all.

If one goes through this thread there is a clear evolution in the quality of the design, patterns and the leather quality. And much of that evolution comes through the contribution of the members here who are willing to try new things with a maker who is extremely attentive to input.

I would hazard a guess that it's weird for Shawn to offer leather that he considers less than perfect (uniform in color, grain etc.) That is what he was told to source especially for the new Dubow a-2. Mismatched panels, scars and striations. And that leather is one of my absolute favorites.
 

Seb Lucas

I'll Lock Up
Messages
7,562
Location
Australia
I personally don't feel bad that Carlos pointed this out in the first place and I don't feel it diminshes Jin's jacket at all.

If one goes through this thread there is a clear evolution in the quality of the design, patterns and the leather quality. And much of that evolution comes through the contribution of the members here who are willing to try new things with a maker who is extremely attentive to input.

I would hazard a guess that it's weird for Shawn to offer leather that he considers less than perfect (uniform in color, grain etc.) That is what he was told to source especially for the new Dubow a-2. Mismatched panels, scars and striations. And that leather is one of my absolute favorites.

Well said.
 

RILO

One of the Regulars
Messages
117
Location
Cleveland Ohio
Do you guys think that Shawn is to keyed in to making his leathers supple?
Perhaps he don't understand the braking in period that leather jacket can present and the pleasure that is
to some of us?
 

bn1966

My Mail is Forwarded Here
Messages
3,108
Location
UK
My custom black deerskin Trucker type 3 is scheduled for delivery this Friday.

It was looking at Jin431’s jacket for his sister that dialled me into it.

TBH the hide being mill plated makes not a jot of difference to me, I liked what I saw & can’t argue with the value being represented at the price point. The purchase is intended as a light weight spring / summer jacket with a late 50’s / 60’s vibe & I’m sure it’s going to meet the brief and some.

My last Eastmans A-2 was a Monarch contract, I was quite specific about about wanting a mixed grain hide & nothing too uniform.

Five Star has been a breath of fresh air for me, things had got a bit stale and very expensive, I’d stopped buying jackets (well almost). Things are fun and doable again, already thinking about an early CR project.
I’ve enjoyed the posts about the deerskin & have learned a bit too about hide finishes.
 

bn1966

My Mail is Forwarded Here
Messages
3,108
Location
UK
I think he is selling mainly to a mainstream market who want shiny new jackets and have limited or no knowledge of hides or patterns.

Spot on Seb, Shawn must have found our community quite a steep learning curve with all our requirements & occasionally a pain in the... but one he has readily embraced.

On the flip side it must be stimulating for a man with the level of passion Shawn has for the subject to find enthusiasts to interact with as well as a new stream of business revenue.

The main stream market generally expects something to be comfortable from the off & ‘break in’ an alien term and concept.
 

Jin431

Call Me a Cab
Messages
2,912
Location
Bay Area CA
You're absolutely right.
It is difficult because here in the TFL there are certainly different claims than in the rest of the world. And in Shawn's world everything is fine and this kind of processing is normal. I think nothing was concealed, but simply not mentioned because it was assumed to be known.
We learn that in the future we will ask exactly how the materials are made and then decide whatever.
With the goatskin I did it, didn't think of it here ;-)

Agreed, we should have asked more information. I got a little nonchalant ordering since they've been doing well so here that I thought everything is top/full grain from their offering.



All this comparing of deer skins, milled, plated, etc I think is the TFL effect blowing things out of context and proportion again.
@Jin431 ’s jacket looks fantastic, the leather is very nice and the fit is spot on.
I think you guys are overlooking the fact that he paid probably at least eight times less or more than what he would have paid if he had bought a deerskin jacket from any if the makers that 5 star are being compared to: LW, RMC, Thedi, etc.
You can’t pay budget and expect premium, the trade off has to be somewhere.
I think he did extremely well there.

Thank you, the jacket is really nice to wear and the construction seems well done as well. It's also my entry level jacket to deerskin that I know I will like in a heavier hide.



I think Shawn is still feeling his way through our sphere here at TFD and some of his choices when it comes to leather treatment and distressing seems somewhat overdone, but his ability to listen to advice and his willingness to try things people suggest are way beyond any other maker I've read about here (maybe other than Greg Fields, but he operates in a much smaller niche) We asked for non-distressed buffalo, we got non-distressed buffalo, we asked for deerskin, we got deerskin (should have asked for uncorrected in the first place ;) )I totally agree with you, Fonzie, the jacket looks great, and the leather never looked like anything other than deerskin to my eyes. But my point is: Shawn's work will only get better and better along with his leatherofferings.


I'm sure he will read this and I would bet he would listen. 5* has been doing so well and I hope they continue to improve.


I personally don't feel bad that Carlos pointed this out in the first place and I don't feel it diminshes Jin's jacket at all.

If one goes through this thread there is a clear evolution in the quality of the design, patterns and the leather quality. And much of that evolution comes through the contribution of the members here who are willing to try new things with a maker who is extremely attentive to input.

I would hazard a guess that it's weird for Shawn to offer leather that he considers less than perfect (uniform in color, grain etc.) That is what he was told to source especially for the new Dubow a-2. Mismatched panels, scars and striations. And that leather is one of my absolute favorites.

I'm actually grateful he pointed it out. I would have never known if he hadn't notice.

They have been on a streak with the goatskin/buffalo/shearling, the deerskin is nice too but it's not full grain so maybe other members here will not like it so much.


My custom black deerskin Trucker type 3 is scheduled for delivery this Friday.

It was looking at Jin431’s jacket for his sister that dialled me into it.

TBH the hide being mill plated makes not a jot of difference to me, I liked what I saw & can’t argue with the value being represented at the price point. The purchase is intended as a light weight spring / summer jacket with a late 50’s / 60’s vibe & I’m sure it’s going to meet the brief and some.

My last Eastmans A-2 was a Monarch contract, I was quite specific about about wanting a mixed grain hide & nothing too uniform.

Five Star has been a breath of fresh air for me, things had got a bit stale and very expensive, I’d stopped buying jackets (well almost). Things are fun and doable again, already thinking about an early CR project.
I’ve enjoyed the posts about the deerskin & have learned a bit too about hide finishes.

I hope you get it earlier than Friday and I hope the fit is a good one.
I'm glad you still feel that way about the deerskin. It really will be a spring/summer staple for me because how nice it is to wear. It feels as light as a denim jacket but softer.

Glad members here have a keen eye and knowledgable and are thoughtful enough to share opinions
 

abone

A-List Customer
Messages
429
Location
British Columbia
Shawn send me the pattern for my Maxwell/Hektor mashup half belt button up this morning. Based on the pattern, and our convo back and forth, it looks like he nailed it. Had a bit of a scare when each panel had XL marked on it, but he confirmed my measurements are XL in 5* world. I am a 42/44 so I can have any tag if I want.
Shawn says my jacket will be the first 5* in his new non-distressed buffalo, 1.3-1.4mm dark brown. I am going with contrast stitching in light brown.
 

Carlos840

I'll Lock Up
Messages
4,944
Location
London
I personally don't feel bad that Carlos pointed this out in the first place and I don't feel it diminshes Jin's jacket at all.

If one goes through this thread there is a clear evolution in the quality of the design, patterns and the leather quality. And much of that evolution comes through the contribution of the members here who are willing to try new things with a maker who is extremely attentive to input.

I would hazard a guess that it's weird for Shawn to offer leather that he considers less than perfect (uniform in color, grain etc.) That is what he was told to source especially for the new Dubow a-2. Mismatched panels, scars and striations. And that leather is one of my absolute favorites.

I was in no way trying to disparage @Jin431 's jacket, i just thought the leather was "weird" and tried to understand what i was seeing.
I really think it's a good looking jacket and great value for money, i just like knowing what is what, that's it.
 

jglf

A-List Customer
Messages
431
Location
USA
Shawn send me the pattern for my Maxwell/Hektor mashup half belt button up this morning. Based on the pattern, and our convo back and forth, it looks like he nailed it. Had a bit of a scare when each panel had XL marked on it, but he confirmed my measurements are XL in 5* world. I am a 42/44 so I can have any tag if I want.
Shawn says my jacket will be the first 5* in his new non-distressed buffalo, 1.3-1.4mm dark brown. I am going with contrast stitching in light brown.
Got my pattern emailed this morning too. Looks like a bunch of us here on the thread ordered around the same time.
 

Riu

Practically Family
Messages
703
Location
UK
I was in no way trying to disparage @Jin431 's jacket, i just thought the leather was "weird" and tried to understand what i was seeing.
I really think it's a good looking jacket and great value for money, i just like knowing what is what, that's it.

I also believe that it's beneficial for everybody to know what you're buying. Before I joined this forum I was browsing through the websites and I could only rely on reviews.

To me, this is healthier and I don't see why someone should take this the wrong way.
 

abone

A-List Customer
Messages
429
Location
British Columbia
If something like this cannot be discussed here, then where? Perfectly fine.
And at least I wouldn't have perceived it negatively.
100% agree, these discussions are educational, at least for me. I’ve learned a lot. I had feedback on my jacket design a few weeks ago that were very helpful, and without that feedback, I would have made mistakes. Cheerleading makes one feel good, constructive feedback moves one forward.
 

Fonzie

One Too Many
Messages
1,573
Location
Australia
Five Star has been a breath of fresh air for me, things had got a bit stale and very expensive, I’d stopped buying jackets (well almost). Things are fun and doable again, already thinking about an early CR project.
I’ve enjoyed the posts about the deerskin & have learned a bit too about hide finishes.

This is the way.

(Insert Mandalorian’s theme song in the background).
 

Fonzie

One Too Many
Messages
1,573
Location
Australia
I was in no way trying to disparage @Jin431 's jacket, i just thought the leather was "weird" and tried to understand what i was seeing.
I really think it's a good looking jacket and great value for money, i just like knowing what is what, that's it.
I didn’t think you were disparaging the jacket per se.
We all learn with your expert contributions quite often, I know I did in this case, but I thought it was important to bring perspective to the discussion.
Keep the critiques coming, TFL is better with them.
 

Jin431

Call Me a Cab
Messages
2,912
Location
Bay Area CA
I was in no way trying to disparage @Jin431 's jacket, i just thought the leather was "weird" and tried to understand what i was seeing.
I really think it's a good looking jacket and great value for money, i just like knowing what is what, that's it.

I didn't take it that way too. Thanks to your observation, we were able to figure out the details behind the leather. It's the 2nd deerskin I ordered from them and if you had not point it out I would have been still clueless.
 

Jin431

Call Me a Cab
Messages
2,912
Location
Bay Area CA
Shawn send me the pattern for my Maxwell/Hektor mashup half belt button up this morning. Based on the pattern, and our convo back and forth, it looks like he nailed it. Had a bit of a scare when each panel had XL marked on it, but he confirmed my measurements are XL in 5* world. I am a 42/44 so I can have any tag if I want.
Shawn says my jacket will be the first 5* in his new non-distressed buffalo, 1.3-1.4mm dark brown. I am going with contrast stitching in light brown.

That will be so interesting to see the dark brown buffalo! Hope you get it soon so we can see how that looks. All the best
 

Forum statistics

Threads
109,031
Messages
3,073,123
Members
54,037
Latest member
GloriaJama
Top