-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Engineer Boots, Harness Boots...
- Thread starter Creeping Past
- Start date
illumin8em
A-List Customer
- Messages
- 396
- Location
- Oregon
Just got these RRL engineer boots. I love the look, but not confident with the fit
kyboots
Practically Family
- Messages
- 991
Those ARE good looking boots. --John
deluxestyling
One of the Regulars
- Messages
- 217
- Location
- Suburbia. London
My brown RRL engineers.
and my studded ones.
and my studded ones.
OK, I'm about to get new pair of Engineers, and need info on sizing.
I have opted 3 diff. options, Lone Wolf, Wesco with bump toe, or full custom job here in Finland out of Horween Shell Cordovan. (I have to buy the leather myself)
So how is sizing in Lone Wolfs and Wescos?
I wear 9D in Chippewa Engineers (steel toe 16"), Sendra Engineers, Carolina Poleclimbers, Throgood Roofers and Moc-Toes and Chippewa 20067 workboots. Some are roomier than other, Chippewa Engineers probably the most, but none too big or small.
All info appreciated.
I have opted 3 diff. options, Lone Wolf, Wesco with bump toe, or full custom job here in Finland out of Horween Shell Cordovan. (I have to buy the leather myself)
So how is sizing in Lone Wolfs and Wescos?
I wear 9D in Chippewa Engineers (steel toe 16"), Sendra Engineers, Carolina Poleclimbers, Throgood Roofers and Moc-Toes and Chippewa 20067 workboots. Some are roomier than other, Chippewa Engineers probably the most, but none too big or small.
All info appreciated.
kyboots
Practically Family
- Messages
- 991
Guys I like all the boots. Sizing on Wescos should remain the same as your shoes. I wear 13's in Wesco boots and most shoes. I don't really see a difference in size or problems here as others have. I have a pair of Chippewa 13's and they appear a little tight across the top of my foot when I walk; not comfortable for me. Would sell them if anyone wants ( brand new ). The RRL's are a great look, will order a pair. Not easy advising others on fit. Just have to try. But you all have posted some beautiful boots here!--John
Mr Badger
Practically Family
- Messages
- 545
- Location
- Somerset, UK
My black Chippewa 27899s just arrived today, really nice for $90 shipped to the UK... 
Cripes but this brand of engineers are waaay large on the sizing! I normally wear a UK 11 / US 12 E, and previously made the mishtake of getting 27911s, the Brown Bomber model, in what I'd always considered my American size – was forced to pack 'em with double insoles to stop slippage and they're still too wide, even for a flatfoot like me...
So I took a chance on 12 D in the 27899s, which still turned out a tad too long – I'd advise Limeys to go up just a half step if they're thinking of buying any Chippewa engineers when calculating their US size – but they are the perfect width...
Am a happy camper, and will now get my much-loved no-name boots reworked with a leather sole, wooden heel piece and deadstock Cat's Paw heels so as I can stud & jewel 'em up:
Nabbed these heels on 5th Ave in Brooklyn last November:
Am as yet undecided about which trad pattern I'm gonna go for – deffo no studs around the top or the heel cup, too much – so it's either gonna be the side and strap combo, or the front of the vamp but not the strap, whaddya reckon?
Cripes but this brand of engineers are waaay large on the sizing! I normally wear a UK 11 / US 12 E, and previously made the mishtake of getting 27911s, the Brown Bomber model, in what I'd always considered my American size – was forced to pack 'em with double insoles to stop slippage and they're still too wide, even for a flatfoot like me...
So I took a chance on 12 D in the 27899s, which still turned out a tad too long – I'd advise Limeys to go up just a half step if they're thinking of buying any Chippewa engineers when calculating their US size – but they are the perfect width...
Am a happy camper, and will now get my much-loved no-name boots reworked with a leather sole, wooden heel piece and deadstock Cat's Paw heels so as I can stud & jewel 'em up:
Nabbed these heels on 5th Ave in Brooklyn last November:
Am as yet undecided about which trad pattern I'm gonna go for – deffo no studs around the top or the heel cup, too much – so it's either gonna be the side and strap combo, or the front of the vamp but not the strap, whaddya reckon?
My black Chippewa 27899s just arrived today, really nice for $90 shipped to the UK...
Great deal! Mind if I ask where from?
Cheers,
Matt
Mr Badger
Practically Family
- Messages
- 545
- Location
- Somerset, UK
Hey Matt, they were off the 'bay, took a helluva long time to find 'em tho'... seems like the only decent engineer boots available in the UK are very pricey, guess you're finding the same, eh? I mean, a pair of nice Red Wing 2268 boots are around £230, too rich for me, and as to what those RRL boots would be including import charges, I hate to think! :eeek:
A friend of mine at work bought some Chippewa 27911s from here, and was very pleased with the service they provided, but you're still talking about £150-160, more if you get nabbed for import duty and the ever-spurious 'handling charge'...
My advice would be to get to work on the 'bay...
A friend of mine at work bought some Chippewa 27911s from here, and was very pleased with the service they provided, but you're still talking about £150-160, more if you get nabbed for import duty and the ever-spurious 'handling charge'...
My advice would be to get to work on the 'bay...
Edward
Bartender
- Messages
- 25,081
- Location
- London, UK
I'm pretty pleased with the Grinders boots I got years ago in Camden - I think they're still about GBP80 or so. When I have the cash, I'd lie to buy a second pair, but the model with the flat sole (not commando) and no steel toecap this time.
oxfordgrant
New in Town
- Messages
- 8
- Location
- oxford UK
Red Wing Brown Nubuck(?) 8248 Engineer Boots
Hello-just joined TFL after enjoying reading the posts on this thread.
I have recently purchased a pair of oldish but pretty good RW 8248 engineers on ebay. I believe these were made up until the early 1990s and were supposedly the women's equivalent of the 2268- however, apart from the lower position of the roller buckle and strap over the metatarsal these look pretty much like the standard RW engineer boot of the period(single ANSI Z41 PT91label etc), so stuff the gender issues. I actually prefer these to my 2268s from the same period as the lower position of the brass buckles means I only need a discrete cuff showing selvage to show off the buckles. So I am happy. Except, the the leather around the toes and heels is quite shiny and wondered if anyone has any tips for restoring this type of leather. I know you can revive nubuck with an abrasive bar but want to be sure this is the right approach- don't want to trash these babies.
Thanks for any help
Hello-just joined TFL after enjoying reading the posts on this thread.
I have recently purchased a pair of oldish but pretty good RW 8248 engineers on ebay. I believe these were made up until the early 1990s and were supposedly the women's equivalent of the 2268- however, apart from the lower position of the roller buckle and strap over the metatarsal these look pretty much like the standard RW engineer boot of the period(single ANSI Z41 PT91label etc), so stuff the gender issues. I actually prefer these to my 2268s from the same period as the lower position of the brass buckles means I only need a discrete cuff showing selvage to show off the buckles. So I am happy. Except, the the leather around the toes and heels is quite shiny and wondered if anyone has any tips for restoring this type of leather. I know you can revive nubuck with an abrasive bar but want to be sure this is the right approach- don't want to trash these babies.
Thanks for any help
Thanks Mr Badger, the locally available options can be a bit pricey, I'll keep an eye out online... Having said that some models seem to be cheaper than stuff in Australia, for example the Harley Davidson Hustons are cheaper here by a reasonable margin. I recently picked up some Red Wing 2268s from Silvermans in London, they're got a few different models and being able to try them on was reassuring prior to laying down 230 quid. I figured for US made boots that's not outrageous, and they should last a while.
The import charges in this country are killing me though, any decent orders will have to wait until I get back to Australia!
Cheers,
Matt
Edward
Bartender
- Messages
- 25,081
- Location
- London, UK
Anyone ever tried the Rocket Originals boots? They look really good on the website photos:
deluxestyling
One of the Regulars
- Messages
- 217
- Location
- Suburbia. London
Hadn't seen them Edward, thanks.
Black ones too... http://www.rocketoriginals.co.uk/proddetail.asp?prod=Engineerboot-Black
The overall profile looks good and they're not out they way price wise.
I personally prefer a more boot like heel on my engineers. Shame too that they ran the welt stitching all the way round the heel.
Black ones too... http://www.rocketoriginals.co.uk/proddetail.asp?prod=Engineerboot-Black
The overall profile looks good and they're not out they way price wise.
I personally prefer a more boot like heel on my engineers. Shame too that they ran the welt stitching all the way round the heel.
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
art89b
Familiar Face
- Messages
- 55
- Location
- Los Angeles
Hello, Im new to the forums, and wanted to show my love towards engineer boots. I'm rather new to the whole boot collecting, but regardless engineers are my weakness. I also have a pair of White's original packers coming in and a pair of Nick's contenders for work. I wear a size 13.
Redwings and black Chippewas were both custom resoled by a neighbor who is a retired cobbler.
By trapz89 at 2012-06-02
By trapz89 at 2012-06-02
By trapz89 at 2012-06-02
By trapz89 at 2012-06-02
Redwings and black Chippewas were both custom resoled by a neighbor who is a retired cobbler.
By trapz89 at 2012-06-02
By trapz89 at 2012-06-02
By trapz89 at 2012-06-02
By trapz89 at 2012-06-02
shadowrider
One of the Regulars
- Messages
- 258
- Location
- Italy
Does anybody know whre I could find a pair of engineers with double top buckles? I used to have a pair of Carolina's like that.
too much coffee
Practically Family
- Messages
- 912
- Location
- Not too far from Spokane, WA
Hey art89b,
Bitchin' boots my friend. Red Wings are killer! Lots of character going on with all of them.
Welcome to the Lounge; a place where guys put $500 boots in the oven and $900 leather jackets in the washer and dryer. Gotta love this place!
Regards,
coffee
Bitchin' boots my friend. Red Wings are killer! Lots of character going on with all of them.
Welcome to the Lounge; a place where guys put $500 boots in the oven and $900 leather jackets in the washer and dryer. Gotta love this place!
Regards,
coffee
Last edited:
Edward
Bartender
- Messages
- 25,081
- Location
- London, UK
When the cash comes my way, I've got my eye on a pair in each colour.... My Grinders are great, but I prefer a flat sole over the commando, and the steel toecap and whatever makes them kinda heavy. I don't know who makes them for Rocket, but if they're as good as the shoes I have from them, they'll be good stuff. Won't be boot weather for a few months yet, so I might hang on and check them out at Rhythm Riot in November...
