Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

what length do you think this 1920s style leather jacket should be?

schitzo

Suspended
Messages
1,472
Location
London
This is a stick size 38 I've been sent to try on. As anticipated it is too small and I will need a size 40.

What I have to work out is how much length to add.

I know it's a short style and I like the feel of this fit. But I'm not sure where exactly it's supposed to sit. If the belt is our point of reference, then should it cover the whole belt and if so with how much overhang, or only partially cover the belt, or sit on top of the belt?

Of course fit is a personal thing. But I like the design of this jacket - the front is longer - and I wanna stay true to how the thing is intended to be worn as far as I can. That said, I'm not about to start wearing trousers up to my armpits just to accommodate it - so it's gonna have to fit in with the rest of my wardrobe, which is mainly modern style low rise jeans like those in the pics.

If you have an opinion great. And if that comes with a rationale of sorts even better.

last thing to add: in case it's not completely clear, on those close ups the tape measure for the front starts on 2" and for the back starts on 3"


dakota38012_zps94c8da48.jpg


dakota38007_zps69e06045.jpg


dakota38008_zps11243a6e.jpg


dakota38II005_zpsd647b4c3.jpg


dakota38II002_zps5c1618dd.jpg




Thanks chaps

All the best
Schitz
 
Last edited:

majormajor

One Too Many
Messages
1,713
Location
UK
Hi Schitzo

For me, a jacket like that should just cover the belt holding up you jeans. The jeans I wear are slightly higher waisted than those Lees, so it might even be OK for me.

If that's the waist you prefer jeanswise, I would add a couple of inches:D;)
 

Sloan1874

I'll Lock Up
Messages
8,427
Location
Glasgow
Yeah, I'd get it down to at least covering your belt - perhaps even enough length so that it doesn't ride up when you lift your arms up. I'm thinking comfort and lack of self-consciousness here. Like the jacket. Who makes it?
 

schitzo

Suspended
Messages
1,472
Location
London
Yeah, I'd get it down to at least covering your belt - perhaps even enough length so that it doesn't ride up when you lift your arms up. I'm thinking comfort and lack of self-consciousness here. Like the jacket. Who makes it?

It's a dakota in seal goat by Alexanders
 

Fanch

I'll Lock Up
Messages
4,490
Location
Texas
Schitz, unlike me, you appear to have a relatively long torso in relation to your height, and I would say 3" added to the body and maybe 2.5" to the sleeves. You might not even be able to take a deep breath in a size 40 in that style :D and maybe consider a size 42.
 

majormajor

One Too Many
Messages
1,713
Location
UK
is that 2 inches or 3 or 2.5 Major? Please try to be precise! :D

Sorry, mate.

At the back, I would take it down to where the 5 is. On the front, I would take it down to where the 4.5 is. That should maintain the longer front, I guess.

Lot's of folks would probably go a bit longer, but I prefer short jackets. I think the design looks cool in a short length.
 

schitzo

Suspended
Messages
1,472
Location
London
Schitz, unlike me, you appear to have a relatively long torso in relation to your height, and I would say 3" added to the body and maybe 2.5" to the sleeves. You might not even be able to take a deep breath in a size 40 in that style :D and maybe consider a size 42.

Thanks Fanch. The sleeve length I know already it's the body I'm undecided on. Sure I have an opinion, but lets just see what the peanut gallery says first..
 

schitzo

Suspended
Messages
1,472
Location
London
At the back, I would take it down to where the 5 is. On the front, I would take it down to where the 4.5 is. That should maintain the longer front, I guess.

I should clarify here that in order to maintain the integrity of the design - with it's longer front - whatever is added I think should be the same for back and front
 

Cooperson

One Too Many
Messages
1,165
Location
Midlands UK
Yikes! that's a tight fit! Only joking - I like a slightly longer fit than most but I understand you want the vintage look so I would go with 4 1/2" front and 5" back. Got to cover the belt at the very least!
 

pauleway

Practically Family
Messages
655
Location
Western NY
Schitz, unlike me, you appear to have a relatively long torso in relation to your height, and I would say 3" added to the body and maybe 2.5" to the sleeves. You might not even be able to take a deep breath in a size 40 in that style :D and maybe consider a size 42.

Definately size 42!!!
 

bretron

Call Me a Cab
Messages
2,519
Location
NW
6" in back, 5" in front and at least another size up in the torso (maybe two) ;) btw who made this?
 

Boyo

Call Me a Cab
Messages
2,243
Location
Long Island NY
Schitzo, using the measuring tape as a reference, I would bring the jacket down in back to the 6" line and let the front work from there. I think there needs to be enough jacket material to cover not only the pants belt but occasionally a shirt tail or tee shirt etc..if A.L. Is willing have them send the size 40 over for a trial fit as well. Not Brown again ??? Take a peek at the black one on the sale page in size 40 :). £200 off
 
Last edited:

resortes805

Call Me a Cab
Messages
2,019
Location
SoCal
If you are interested in a total vintage look, shoot for some tough fabric slacks (a hearty twill should work) that sit at your navel and keep your jacket at the length it is.
 
Messages
10,181
Location
Pasadena, CA
3" front
3" back
That's based on what you say you like. Of course. Sleeves need a lot too. But you can figure that out.
My new Ventura fits higher, and I wear lower rise pants now. It doesn't cover too much. And I dig it.
Don't apologize for what you like. But also make sure you can move in it - obviously that's too small everywhere.
 

Forum statistics

Threads
109,256
Messages
3,077,448
Members
54,183
Latest member
UrbanGraveDave
Top