Western, anyone?

[Michael R.]

Hey @Latigo , is that Davis Hatters , that became Davis & Sons Hatters AKA Davis and Sons Hatting Co ? Albuquerque NM , then (I think) was it Santa Fe ? Nice Hat ! How tall is the crown ?

 

[Latigo]

@Michael R. Yes it is. There is a retail in Santa Fe but the shop is at the ranch between Albuquerque and Santa Fe.

It's a 6 inch crown...........

Latigo

 

[Joao Encarnado]

Been pretty busy lately but I did manage a drive out to the Davis place to get my latest hat rebuilt. I had posted this in the "post new hats" thread and I think most of you have seen it already. It's a beaver Brand pure beaver with a 3 1/2 inch brim.

OK....What crease would you give it....?

Did it changed color!?

Crease... It's a personal taste. But I would say no to the cattleman crease.

 

[Michael R.]

I like a Cattleman Crease , plus a bunch more . It is a personal preference thing , plus what the Hat would look right with . 6" is a good height to work with . They'll take a Montana Peak , or almost anything . Nice Color .

 

[Latigo]

@Joao Encarnado said: "Did it changed color!?"
No, it's just the picture, it's indoors and with flash, not out in the sun.

@Michael R. Said: "I like a Cattleman Crease , plus a bunch more . It is a personal preference thing , plus what the Hat would look right with"
It's more about what the hat would look right with....Don't really know how old the hat is but it looks vintage......with that said, yes I'm thinking Cattleman crease.
These are all variations on that crease...The first one being pretty standard.....the others not so much......

Latigo

 

[Lone_Ranger]

Can anyone recommend a place to get a custom western hat?

Anyone have a hat from Knudsen Hats? I believe they may be able to do what I'm looking for..

 

[Joao Encarnado]

@Michael R. Said: "I like a Cattleman Crease , plus a bunch more . It is a personal preference thing , plus what the Hat would look right with"
It's more about what the hat would look right with....Don't really know how old the hat is but it looks vintage......with that said, yes I'm thinking Cattleman crease.
These are all variations on that crease...The first one being pretty standard.....the others not so much......

I think the last one is not called "cattleman". I would go for the last one.

 

[Joao Encarnado]

Can anyone recommend a place to get a custom western hat?

Anyone have a hat from Knudsen Hats? I believe they may be able to do what I'm looking for..

As everything custom, go for the one near you. Measures is the most important thing.
Any western custom hatter can do the hat you are looking for. There is a list somewhere in a thread.

 

[suitedcboy]

Can anyone recommend a place to get a custom western hat?

Anyone have a hat from Knudsen Hats? I believe they may be able to do what I'm looking for..

What do you have in mind? Some styles and treatments are the forte` of certain hatters. Many can do a great job with a high quality beaver western with personal touches.

 

[Michael R.]

Can anyone recommend a place to get a custom western hat?

Anyone have a hat from Knudsen Hats? I believe they may be able to do what I'm looking for..

If you're pretty confident of your size and head oval (shape) , I'd go with www.mackeycustomhats.com , great quality and price .
A few others are Peters Bros , Buckaroo Hatters , Catalina Hatters , but I have a bunch more that are good .

 

[KarlCrow]

'confidence with your size'

pay the bucks it needs to be perfect, paranoid on that. Arggghhhhhhh

 

[Michael R.]

I'm about 30 miles from Buckaroo Hatters , and Mike Moore does a good job , has a conformatuer , but I have trouble getting there when they're open . Plus I just like Mackey's work . He's almost half the price on 100% beaver , too . www.tomhirt.com is highly recommended also .

 

[Latigo]

@Joao Encarnado said: "I think the last one is not called "cattleman". I would go for the last one."

Well Joao I sort of like the last one too...I also like the second one but not as much. As for the last one not being a cattleman I don't know for certain but then again it's an Akubra which is Aussie and they just call it a Outback Club. The second one is from Watson's Hat Shop and he just calls it a Horseman. Here is a chart from the web which shows some of the older creases and it looks like a "wide cattleman" or it could be a narrow brick crease........Who knows it could be both!

Latigo

 

[Joao Encarnado]

Different names for the same thing.
Well, the cattleman is the "most classic" and common.

 

[Lone_Ranger]

Thanks for the information.

I was pretty confident about my hat size, it seemed pretty consistent, until I bought a Stetson fedora recently. The shop even measured me and came up with the same size. When the hat came it was slightly large.

Wonder which hat makers would be close enough for me to visit? I'll have to find the list.

I'm looking for the hat Richard Boone wore, as Paladin, in Have Gun Will Travel. There are actually two (or three) different versions with slight variations through the 6 seasons. I have a specific version in mind.

 

[T Jones]

Can anyone recommend a place to get a custom western hat?

Anyone have a hat from Knudsen Hats? I believe they may be able to do what I'm looking for..

There's a few hatter's here on the Lounge who can make up a nice Western for you. Buckaroo Hatters might be the ideal hatter for a custom Western. They also did the hats for the Hank Williams movie, "I Saw The Light".

 

[T Jones]

This is for HJ. I know he's been considering something similar for one of his westerns. I watched a bit of "The Undefeated" last night and the Duke was wearing this.
View attachment 78277 View attachment 78278

I saw that same crease on one of Hank Williams' westerns in this you tube video. The crown height and the block shape are obviously different from the Duke's, though

 

[RJR]

There's a few hatter's here on the Lounge who can make up a nice Western for you. Buckaroo Hatters might be the ideal hatter for a custom Western. They also did the hats for the Hank Williams movie, "I Saw The Light".

No question that FL hatters can make a hat like Boones;I would suggest that it isn't far different from an Akubra Snowy River with a couple of tweaks.

 

[Michael R.]

Thanks for the information.

I was pretty confident about my hat size, it seemed pretty consistent, until I bought a Stetson fedora recently. The shop even measured me and came up with the same size. When the hat came it was slightly large.

Wonder which hat makers would be close enough for me to visit? I'll have to find the list.

I'm looking for the hat Richard Boone wore, as Paladin, in Have Gun Will Travel. There are actually two (or three) different versions with slight variations through the 6 seasons. I have a specific version in mind.

Thats better than too small . You can pad it up and still wear it comfortably , it'll shrink in time . I think Terry or someone (Might be Art) said measure the block , it should be a size larger to accommodate the sweat . Not all 7 3/8 Blocks measure the same . Stetson seem to me to be a little smaller than Resistol generally for the same size . Still in the range though .

 

[splintercellsz]

20s stetson has this crease in it's memory, so I run with it

Sent from my SM-G935P using Tapatalk