Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Western, anyone?

H Weinstein

One of the Regulars
Messages
224
Location
Maryland

Chamuco

I'll Lock Up
Messages
4,126
Location
Guadalajara Mexico
Hello Weinstein !!!

Would you be so kind to let me know more about this hat? Model and color.

Killer looking hat...I have been looking and looking at the picture and it is not only great looking but also might be a more wearable hat, more combinable hat, that a more western shaped one for me.


979116751d0d9c235c5f04e3a2e1c140.jpg
 

Chamuco

I'll Lock Up
Messages
4,126
Location
Guadalajara Mexico
Hi, Chamuco --

I have 10 Akubra westerns. I thought about the Snowy River, but it has a pretty low crown, which seemed like it might rest on the top of my head. So I went for some taller crown styles, which also have slightly wider brims. Depends on your tastes.

The Bobby is a great hat with a 3.6" brim. The crown is softly shaped, not quite a cattleman block but close. However, it's easy enough to coax either crown or brim into shapes more to your liking with a little tea-kettle steam or just spraying it with distilled water. (Lots of us here can tell you more about how to do that. All of my hats I've reshaped myself, and it's fun. Plus you get a "custom" hat when you're done. But not everyone wants to go to the trouble.)

I have 3 Rough Riders (3.8" brim, which I cut to about 3.5") in loden (dark brown), light sand (very light but not quite white) and black. I love all 3 colors and wear them pretty much any time. I just brush them to keep them clean, but then I don't tend to engage in activities which would get them very dirty.

Everything Australian (http://www.everythingaustralian.com.au) is a great place to order Akubras. Really good prices, reasonable shipping, excellent customer service from Sam Menche.

Please let me know if you have any questions. Here are some of my Akubra westerns in various styles:

1zg7255.jpg


v4vwaq.jpg


2h6ggop.jpg


2ed2j61.jpg


v48j0y.jpg
Hello Weinstein !!!

Would you be so kind to let me know more about this hat? Model and color.

Killer looking hat...I have been looking and looking at the picture and it is not only great looking but also might be a more wearable hat, more combinable hat, that a more western shaped one for me.


979116751d0d9c235c5f04e3a2e1c140.jpg
 

H Weinstein

One of the Regulars
Messages
224
Location
Maryland
Hello Weinstein !!!

Would you be so kind to let me know more about this hat? Model and color.

Killer looking hat...I have been looking and looking at the picture and it is not only great looking but also might be a more wearable hat, more combinable hat, that a more western shaped one for me.


979116751d0d9c235c5f04e3a2e1c140.jpg

Hi, Chamuco --

Thanks for the kind words!

This started out as an Akubra Bobby in Sand (which is a light color, but a shade darker than it looks in this pic).
It's been through several re-stylings. I think it was my first Akubra purchase, about 4 years ago, before I knew much about how to rebash hats and before I obtained some inexpensive but incredibly helpful shaping equipment -- in my case, just a plastic Hat Shaper block (the straight-sided dome from hatshapers.com) and a really good wooden vintage hat jack/stretcher found on eBay for about $20.

As I got more hats, I could not decide what to do with this one. Eventually settled on re-doing it as a replica of the hat worn by Tim Olyphant as Raylan Givens in the TV series "Justified"...which is just a simple cattleman crown, the brim trimmed to 3.25 inches from about 3.6 inches and given an understated dip front and back and slight side curl. I found the correct tooled leather band at our local western-wear store. (It's a common band, probably easy to find on eBay or online.)

The standard shape of the Bobby isn't that different from how mine ended up. It wouldn't be hard to re-shape the crown a little bit. Do keep in mind that the brim would be a little wider than the one in my photo.

If you don't think you're ready to tackle your own re-shaping, or just don't want to bother, the Akubra Rough Rider in Light Sand (a shade lighter) gives you the same shape crown as mine with a little more curl to the brim.
The Rough Rider does have a wider brim, at about 3.8 inches.

The Akubra Kiandra comes in Sand and looks like it gives you a similar crown shape with a slightly smaller brim (3.1 inches). It's a little more "country" and less "western" but still more hat (and more sun protection) than a fedora style.

Hope this helps. Please let me know if you have more questions!

Howard
 

Chamuco

I'll Lock Up
Messages
4,126
Location
Guadalajara Mexico
Hi, Chamuco --

Thanks for the kind words!

This started out as an Akubra Bobby in Sand (which is a light color, but a shade darker than it looks in this pic).
It's been through several re-stylings. I think it was my first Akubra purchase, about 4 years ago, before I knew much about how to rebash hats and before I obtained some inexpensive but incredibly helpful shaping equipment -- in my case, just a plastic Hat Shaper block (the straight-sided dome from hatshapers.com) and a really good wooden vintage hat jack/stretcher found on eBay for about $20.

As I got more hats, I could not decide what to do with this one. Eventually settled on re-doing it as a replica of the hat worn by Tim Olyphant as Raylan Givens in the TV series "Justified"...which is just a simple cattleman crown, the brim trimmed to 3.25 inches from about 3.6 inches and given an understated dip front and back and slight side curl. I found the correct tooled leather band at our local western-wear store. (It's a common band, probably easy to find on eBay or online.)

The standard shape of the Bobby isn't that different from how mine ended up. It wouldn't be hard to re-shape the crown a little bit. Do keep in mind that the brim would be a little wider than the one in my photo.

If you don't think you're ready to tackle your own re-shaping, or just don't want to bother, the Akubra Rough Rider in Light Sand (a shade lighter) gives you the same shape crown as mine with a little more curl to the brim.
The Rough Rider does have a wider brim, at about 3.8 inches.

The Akubra Kiandra comes in Sand and looks like it gives you a similar crown shape with a slightly smaller brim (3.1 inches). It's a little more "country" and less "western" but still more hat (and more sun protection) than a fedora style.

Hope this helps. Please let me know if you have more questions!

Howard
Thanks Howard

Very helpful, love the color , lighter colors go well with Mexican warmer weather.

My next Akubra will be more on the western side.

I will order it as soon as I get the ones I am waiting for.

Already have a nice hat Jack, will look for the greasing tools.

Things change when you turn from Panamas , straws, an regular pre creased hats to open crowns and you want to get the right shaping for you.

Thanks a lot !!!
 

H Weinstein

One of the Regulars
Messages
224
Location
Maryland
Thanks Howard

Very helpful, love the color , lighter colors go well with Mexican warmer weather.

My next Akubra will be more on the western side.

I will order it as soon as I get the ones I am waiting for.

Already have a nice hat Jack, will look for the greasing tools.

Things change when you turn from Panamas , straws, an regular pre creased hats to open crowns and you want to get the right shaping for you.

Thanks a lot !!!

You're welcome :)

The plastic Hat Shaper was a great investment -- about $40 including shipping (in the US, anyway). Much cheaper than any of the wood blocks I saw on eBay, and does pretty much the same job -- allowing you to take any pre-creased hat and bring it back to open crown.

I use tea-kettle steam, but just spraying with water will probably work just as well. I've used the Hat Shaper dozens of times. Others here at The Lounge have used a Hat Shaper too.
 

Brian Niebuhr

One of the Regulars
Messages
150
Location
Iowa
It's been about a year since I've gotten a new hat. Too long. I was thinking about another Akubra but there just isn't a model that I want bad enough since they thinned the herd and I don't trust other hat companies enough to shell out the dough. Used hats in my size are few and rarely ever open corwned. I've been eyeballing the Miller open crown westerns for years. Nealry bought one about 10 years ago. I think it was "big country" or "big ben". Any other modern open crown westerns out there that can withstand rain as well as Akubras? I think it's fair to use them as a standard. Maybe not realistic but it should be considering how much new hats cost. We shouldn't have to spend money on hats that can't do their job. Any suggestions would be of great help!
 
Messages
10,524
Location
DnD Ranch, Cherokee County, GA
It's been about a year since I've gotten a new hat. Too long. I was thinking about another Akubra but there just isn't a model that I want bad enough since they thinned the herd and I don't trust other hat companies enough to shell out the dough. Used hats in my size are few and rarely ever open corwned. I've been eyeballing the Miller open crown westerns for years. Nealry bought one about 10 years ago. I think it was "big country" or "big ben". Any other modern open crown westerns out there that can withstand rain as well as Akubras? I think it's fair to use them as a standard. Maybe not realistic but it should be considering how much new hats cost. We shouldn't have to spend money on hats that can't do their job. Any suggestions would be of great help!

You can get a number of open crown western models from American Hat Company.
Personally, I can't talk to their durability in the wet as I usually get older model Resistols of ebay to use as beaters around the ranch....
 

Chamuco

I'll Lock Up
Messages
4,126
Location
Guadalajara Mexico
You're welcome :)

The plastic Hat Shaper was a great investment -- about $40 including shipping (in the US, anyway). Much cheaper than any of the wood blocks I saw on eBay, and does pretty much the same job -- allowing you to take any pre-creased hat and bring it back to open crown.

I use tea-kettle steam, but just spraying with water will probably work just as well. I've used the Hat Shaper dozens of times. Others here at The Lounge have used a Hat Shaper too.
Thanks again Howard !!!

Now I have my plastic Hat Shaper ordered.

Waiting to get it and use it !!!
 

Forum statistics

Threads
109,248
Messages
3,077,255
Members
54,183
Latest member
UrbanGraveDave
Top