JakeHolman
One of the Regulars
- Messages
- 175
- Location
- UK
^ That sounds like it will be a beauty. Looking forward to seeing how it turns out.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Staff changes at Aero Leather
- Thread starter Cooperson
- Start date
The same for me...now I'm quite confused, I haven't received answers to my last mails and now I found out why in this thread.
cloudylemonade
A-List Customer
- Messages
- 405
- Location
- Glasgow
We're doing our best to catch up on the back log of emails we have, please bear with us for the next few days. Alternative forward an email to me on holly@aeroleatherclothing.com.
Todd M.
One of the Regulars
- Messages
- 159
- Location
- Orlando, Fl.
I just read this entire thread. As a business owner for over 20 years their are things you can't discuss. By reading between the lines though, their may have been some shady dealings between wholesalers and employees? Aero is my favorite Jacket Co. and the quality is second to none. You will only get stronger as a company when the family runs the business.
robrinay
One Too Many
- Messages
- 1,490
- Location
- Sheffield UK
I'll be pleased to post a picture when it arrives - it will be my first new Aero jacket and perhaps even the first model of the new design (excepting the prototype of course).
Cooperson
One Too Many
- Messages
- 1,165
- Location
- Midlands UK
Hardly dare ask, but is it true that some experienced machinists also left the company?
trapp
Practically Family
- Messages
- 546
- Location
- bay area, ca
Wow, just caught up on all this. Never worked directly with Will but I'm really sorry to hear that Amanda has left. She could not possibly have been more responsive to the chains of emails I sent as I put together an order with her a few months back. My experience with Amanda was fantastic.
- Messages
- 6,456
- Location
- South of Nashville
Yes, agree 100%.
I just made my way through this entire thread as well - also haven't heard back from a couple of recent e-mails to Aero. I guess I'll wait a couple more days, and if I don't hear anything, contact Holly.
cloudylemonade
A-List Customer
- Messages
- 405
- Location
- Glasgow
Sorry, we're working flat out 24/7, 7 days a week to get on top of everything. Please bear with us, and we will be back in touch as soon as possible. But, yes, if you've not heard anything in a few more days feel free to email me on holly@aeroleatherclothing.com
Thanks for understanding!
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
I was at the factory again this morning and I'm pleased to say that (as majormajor and robinray said earlier) the place is a hive of activity and just seems to have a purposeful air about it. I met a few of the staff, including Christine the new receptionist, Julie who'll be doing my Stockman, and Paula who made my HWM earlier this year. I'd say morale was definitely high.
Considering how very busy he is, Ken was very generous with his time this morning and was kind enough to give me a quick tour of the inner sanctum of Chateau Aero, which was hugely interesting for an Aero jacket buyer like me.
From what I could see, I'd say that we as customers need have nothing to fear, although as Holly has said, there does seem to be a heck of a lot of work to get through, which is obviously why they're now working 7 days a week. I can only wish them all the best and hope they get back on top of the workload soon.
Considering how very busy he is, Ken was very generous with his time this morning and was kind enough to give me a quick tour of the inner sanctum of Chateau Aero, which was hugely interesting for an Aero jacket buyer like me.
From what I could see, I'd say that we as customers need have nothing to fear, although as Holly has said, there does seem to be a heck of a lot of work to get through, which is obviously why they're now working 7 days a week. I can only wish them all the best and hope they get back on top of the workload soon.
Its great to have a look around and see the machines and factory workings, a rare sight these days with so many manufacturing going to the Far East nowadays.
And Kens 'Museum'. A bit like the old Thrift Shop from thee 1980s
Did you get to see my old jacket while you were there? The A2 with the little Hepolite wing badge?
I'm afraid I missed that, spending more time in the workshop. It's difficult to know where to look, though, as there's just so much vintage stuff and new jackets to take in. The styles, colours and the smell of leather is overwhelming, especially after reading so much about it all on here.
Strange to think that some of the jackets I was looking at might very soon be on their way to Lounge members.
WDW, it was most interesting to read your post regarding your recent visit to the Aero factory and experience there. I suspect that your issue regarding sleeves too short on your Stockman will be resolved with your new and improved jacket soon to be made. Like you, sleeves that are too short drive me crazy, and there is a "sweet spot" for everything regarding the fit, although a jacket that is too tight or sleeves that are too short will keep the jacket in my closet and rarely, if ever, to be worn. Hopefully, Aero will alter their QM model and more carefully inspect jackets prior to shipping so that measurement errors are minimized. I do think that the fewer modifications that we as customers make to our orders, the less likelihood there is of errors occurring, although that was clearly not the case with your order.
Fanch, it shows how important the job of the cutter is. I gather that the assumption (and reasonably so) is that the cutter has done his/her job 100% in accordance with the specs of the buyer. If the cutter gets it wrong in terms of altered length, tapering or other non-standard requirements, then I can't see who'd even notice until it gets to the buyer. It's a big responsibility for the cutter, and the accuracy of their work is easily measurable in terms of the amount of returns due to not meeting spec.
Like you say, the more mods, the more possibility for error.
Like you say, the more mods, the more possibility for error.
majormajor
One Too Many
- Messages
- 1,713
- Location
- UK
Another problem with sleeves is that not everyone agrees on just how long a sleeve should be.
One person's "perfect fit" is another's too long or too short. Some folks will want to allow for hard FQHH scrunching with wear and thereby shortening the sleeve.
Not easy to cut.:eeek:
One person's "perfect fit" is another's too long or too short. Some folks will want to allow for hard FQHH scrunching with wear and thereby shortening the sleeve.
Not easy to cut.:eeek:
I was lucky and was able to have my sleeves measured at the factory each time, where Will significantly over-measured to allow for wrinkling. I thought they were too long at first, but now know better.
For those who don't know anything about the properties of FQHH (like me at my first order), I would suspect that many might order "normal" lengths and end up regretting it a few months or years later. The first jacket can be an expensive trial run, but at least you can use it as a base to get the next few right.
For those who don't know anything about the properties of FQHH (like me at my first order), I would suspect that many might order "normal" lengths and end up regretting it a few months or years later. The first jacket can be an expensive trial run, but at least you can use it as a base to get the next few right.
Although I have never owned a FQHH jacket, I am impressed that the consensus seems to be that creasing can easily shorten the sleeves of a FQHH by at least 1/2 inch, so that longer seems better, in that long sleeves can always be shortened at a later time if needed, but short sleeves cannot be lengthened. In viewing numerous pictures that have been illustrated on this forum, I have seen a significant number of instances in which sleeves appeared to be simply too short but rarely, if ever, too long. However, I do agree with majormajor that there is significant variation in perception of what is acceptable to one but not another regarding "the perfect fit."
Deacon
Familiar Face
- Messages
- 50
- Location
- Northern California
I too have been in the process of working out the sizing for a jacket order with Amanda and was a bit surprised to find her responses to my emails, when she deemed to respond, rather lackadaisical. So this latest news of her departure makes sense. I hope Aero is able to get things straightened out.
Similar threads
