-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Show us your Guns!
- Thread starter Undertow
- Start date
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
The 3rd Gens were some solid workhorses. When my agency switched from the revolver to a semi auto in 1991 we were issued the 4046. We carried that until 2005. Mine resides in the safe at home and when I take it out its like shaking hands with an old friend.
MikePotts
Practically Family
- Messages
- 837
- Location
- Tivy, Texas.
I had no idea that they were made so late ....wow.
DeaconKC
One Too Many
- Messages
- 1,736
- Location
- Heber Springs, AR
Mike, yup that is the date of manufacture. That is a very sweet little 44 by the way.
They sure were/are Kirk. I still have a 4006 bought new in the early 90s. In fact when I went to buy a holster for it they were hard to find. I found a fellow in the NW that said he'd use mine as a pattern if I wanted to send it. So I did. He made me a nice black horsehide scabbard which I still use for carry. Back then he was called Proline Leather today he goes buy Kramer leather.
Daniel Hunter
One of the Regulars
- Messages
- 190
- Location
- Vista, Ca.
Savage Model 99E in .308. I picked this up at a local shop recently and it looks like it was never used.
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
That brings back memories. I remember seeing adds in the gun mags for Proline back in the day. Yeah I remember trying to find off-duty leather for the 4046. Our detectives were issued Don Hume pancake holsters so we were able to get those.
Oldsarge
One Too Many
- Messages
- 1,440
- Location
- On the banks of the Wilamette
Savage Model 99E in .308. I picked this up at a local shop recently and it looks like it was never used.
Never used? It looks like it hasn't ever been touched! Oh, my. Oh my, oh my, oh my!
Don Hume certainly makes nice gun leather. Yup I believe that's where I found him, in Hand Gum magazine. Just received another of the same style from Kramer for a 4013TSW. Same quality and finish. Let's see if I can get another picture to up load. Hey it worked!
jkingrph
Practically Family
- Messages
- 848
- Location
- Jacksonville, Tx, West Monroe, La.
Nice, I picked up what I think is an EG model in 300 Savage some years back at a Tyler, Tx gun show. The show was really a bust, not many vendors showed up, due to bad weather and a very big show going on that same weekend in Houston. Mine is a late 1940's vintage, and was well used, and not abused, and came with an old Weaver K 4 scope with a Lee dot reticule, which I was told was worth more than the gun??
Interesting gun, and not a bad shooter.
jkingrph
Practically Family
- Messages
- 848
- Location
- Jacksonville, Tx, West Monroe, La.
Nothing to show, but I "bit the bullet" so to speak yesterday, and placed a deposit and a pre order for a CZ 527 mini mauser in 6.5 Grendel. I had thought abut rebarreling one of the 7.62 cal rifles, but would rather go new factory. The nearest dealer called and found out that only 300 rifles are coming to the US, and that 293 were already committed, hence my pre order. It should be about a 90 day wait.
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
Nice looking Kimber dmark and welcome to the lounge.
Kirk
Kirk
MikePotts
Practically Family
- Messages
- 837
- Location
- Tivy, Texas.
Good to have you dmark.
Pretty tough not to like these.
I have one of these, and I'll tell you Kimber has some fantastic customer service. I owned mine not even a month when the black started to peel off. I called customer service and was told to send back the weapon at no charge to me and that they would redo the blacking. I thought about it after I got off the phone and called them back. I asked that instead of re blacking would they instead change it to the aluminum shade. They said and did. I'll tell you to me it looks so much better all aluminum instead of the standard aluminum and black.
As a side note, of all the mass market 1911's I've seen, I would rank Kimber at the top when it comes to the fit and finish of the internals.
rockascout
New in Town
- Messages
- 36
- Location
- phila
beretta 92fs (or if you mean the one with the weapon light, that's a s&w m&p9).
pic thread:
one of my ars.
DeaconKC
One Too Many
- Messages
- 1,736
- Location
- Heber Springs, AR
dmark, welcome! Good taste in firearms
TPD166
One Too Many
- Messages
- 1,295
- Location
- Lone Star State
I agree. While I started in the revolver days (1981), I did occasionally carry an S&W Model 59 in the early 80s. My agency switched from revolvers in 1987 and most of us carried Glocks (Sig 226 and Beretta 92s were the only other options). I switched agencies in 1989 and was issued a 5906 - and was not happy about giving up my Glock. But a day at the range made me a believer in those 3rd Gen S&Ws! My 5906 was a tack-driver and I bought it from the Sheriff's Office when they upgraded a few years later. If it wasn't so heavy, I'd probably still carry it now and then.
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
