Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Show us your Guns!

Rathdown

Practically Family
Messages
572
Location
Virginia
I have a question for you gun experts.
I have only ever had an old farmers percussion cap shotgun and had a go with a Remington pump on a range so am a bit of a know nothing about handling guns.
OK, there is a new film out with Mel Gibson, as with many films these days the actor 'Fires' his pistol holding it sideways rather than butt downward. Is this a movie makers piece of fiction or does using an automatic pistol in this way have any standing in the use of firearms
Theoretically either style should work; in the real world however, better accuracy and cycling of the firearm occur when the pistol is held in the traditional manner. Believe me, if shooting "Hollywood style" was any good, it would have been adopted by shooters long ago.
 

rocketeer

Call Me a Cab
Messages
2,605
Location
England
Rocketeer, Hollywood started using that after seeing SWAT entry teams use that style, but it designed for guys carrying an armored entry shield, so they can see through the view slot on the shield. Otherwise, it is just "Hollyweird" showing their usual incompetence when it comes to firearms.

Theoretically either style should work; in the real world however, better accuracy and cycling of the firearm occur when the pistol is held in the traditional manner. Believe me, if shooting "Hollywood style" was any good, it would have been adopted by shooters long ago.

Thanks for both answers, I never knew about the SWAT team tactics so thats a new angle for me, my guess at Hollywood style use proved correct.
Over here our firearms laws prohibit the collecting of some real classic pistols & rifles etc. As a young boy I once had a long barrelled Luger but swapped it for some other thing as it was not a 'cowboy' gun. That would have been a banned item today, granddads old war souvenirs are still being handed in by little old ladies during weapons amnesties.
Thanks again, John
 

bulldog1935

Suspended
Messages
232
Location
downtown Bulverde, Texas
hey, we're on page .357
cP4120428.jpg
 

KilroyCD

One Too Many
Messages
1,966
Location
Lancaster County, PA
Once again I pop in with another antique British rifle. This time it's a P-1864 Snider I picked up at the IMA Easton, PA showroom on 29 September. This was one of their "untouched" rifles from the Nepalese cache, in "as found" condition. First, the "before" pics:
Picture426.jpg

Picture427.jpg

Picture428.jpg


Once the 130+ years of dried grease and grime were cleaned off, this was the result:
Picture432.jpg


The bluing on the barrel was in decent shape, and the bore is pristine. The stock cleaned up nicely, and only had a couple of small hairline cracks I needed to tend to. All in all, it was a real diamond in the rough.
 

KilroyCD

One Too Many
Messages
1,966
Location
Lancaster County, PA
That's excellent. :eusa_clap Can you get ammunition for it? Also, does IMA sell online? I can't get to PA any time soon, but I'd love to buy some of those amazing historical pieces come up with.
Yes, IMA does sell online (www.IMA-USA.com), and it is possible to load ammunition for it (.577 Snider) using 24-gauge brass as the basis for custom loads. Here's a link to a thread on the British Militaria Forum about such a load: http://britishmilitariaforums.yuku....s--577---IMA-Snider---time--dies#.UHZMW280WSo
 

bulldog1935

Suspended
Messages
232
Location
downtown Bulverde, Texas
Nice 686. How's she handle with those Magna-style grips?

And since it is page 357, here's another.
rangeday002.jpg


Firing her with the service grips from the '20's on her wasn't as much fun as it looked.
I've never liked the checkered Smith grips, and tried Hogue for awhile. They grip great, and work even better with the speedloader, and even though I have long fingers, they just felt too long for me. I replaced them with water buffalo horn target grips, and love these.
cP4120444.jpg

Your 28 is a beauty.
 

BigFitz

Practically Family
Messages
630
Location
Warren (pronounced 'worn') Ohio
Big Fitz, try putting a Tyler T grip adapter on that 27, it makes a huge difference! plus you keep the original looks.

I do plan on putting a Tyler T grip on it at some point. I've replaced the old service grips in the photo with a pair of "correct" Magnas and that made a big difference over the service grips. With the service grips, after a few rounds it felt like I was being hit in the hand with a hammer. With the Magnas, not so much.:D
 

BigFitz

Practically Family
Messages
630
Location
Warren (pronounced 'worn') Ohio
I've never liked the checkered Smith grips, and tried Hogue for awhile. They grip great, and work even better with the speedloader, and even though I have long fingers, they just felt too long for me. I replaced them with water buffalo horn target grips, and love these.
cP4120444.jpg

Your 28 is a beauty.

Those grips sure are purty!

Thanks for the compliment, she's a bit rougher looking in person. I'm not trying to be a wise guy, but technically she's a S&W Model of 1950 357 magnum, more commonly referred to(but not an offical name) as a pre-27. One of these days I'm going to get off my duff and have this pistol lettered from the S&W factory historian. There is a name engraved just above the trigger, "Fred Eggers" that googles as a hollywood writer of '50's and '60's tv westerns, but of course that doesn't mean it's his. If it letters to him, I'm also hoping that the engraving was done by Alvin White, but now I'm really pipe dreaming.:D
 

matrioshka

One of the Regulars
Messages
152
Location
New Hampshire
At this rate, I'm going to be putting cardboard in my shoes...

Oh look, a box. Feller says it's a Model 34:

DSCN0296.jpg


Looks like there's some paper inside:

DSCN0305.jpg


Looks like a Model 34, or is it? The frame seems a little odd...

DSCN0301.jpg

DSCN0297.jpg


It's a pre-model 43. A Kit Gun with an aluminum frame and cylinder. And a flat latch to boot. Still has the warranty card. This is only the second one I've seen in 16 years.

Back then I was a broke you-know-what floor sweeper/dogsbody for a transmission shop. He wanted $190 for it, it could have been $1900 as far as I was concerned. What made it worse was that he wouldn't take a $100 deposit to hold it for two days. "Ah well", I said to myself, "I'll find another". Didn't think it would take sixteen years.

The moral of this story: Strike when the iron's hot, even if you have to sell something else (like blood, if need be). And if a man's so paranoid he won't take a hundred dollar deposit for two days, then maybe it isn't worth it to do business with him.
 

BigFitz

Practically Family
Messages
630
Location
Warren (pronounced 'worn') Ohio
Oh look, a box. Feller says it's a Model 34:
It's a pre-model 43. A Kit Gun with an aluminum frame and cylinder. And a flat latch to boot. Still has the warranty card. This is only the second one I've seen in 16 years.

Back then I was a broke you-know-what floor sweeper/dogsbody for a transmission shop. He wanted $190 for it, it could have been $1900 as far as I was concerned. What made it worse was that he wouldn't take a $100 deposit to hold it for two days. "Ah well", I said to myself, "I'll find another". Didn't think it would take sixteen years.

The moral of this story: Strike when the iron's hot, even if you have to sell something else (like blood, if need be). And if a man's so paranoid he won't take a hundred dollar deposit for two days, then maybe it isn't worth it to do business with him.

Maybe he has dyslexia? When you mentioned the cardboard for your shoes, for a moment I thought you were referring to the box in your post! Then I thought "there's no way he meant that box"

Anyway, nice find there!
 

matrioshka

One of the Regulars
Messages
152
Location
New Hampshire
Thank you.

It's a neat thing. I see a lot of older Smiths, but nothing like this.

But yeah, he thought it was a regular Model 34.

I'm shocked at what people want for just the box.
 

Forum statistics

Threads
109,736
Messages
3,087,345
Members
54,544
Latest member
Clemmy345
Top