Post New Hats Here!

[Steve1857]

I love my Mogul. I’m sure you’ll be very happy with that one.

I already am

 

[RickP]

These postings need a bit of an introduction. A large box arrived on my doorstep last week. It contained a kind and extremely generous gift from the north of Italy. Daniele @Daniele Tanto is cleaning up some of his vast collection and found some in my size. Under the ruse of the hats needing work he sent them my way. All most of them needed was the usual steaming, brushing and stretching, but I'm not complaining! So here they are (except for one, which still is on the stretcher).

Cambiaghi heather fedora in brown. Size 56 with the raw edge brim at 6cm and the crown at 10cm at the center dent. Weighs 113 grams. The unreeded sweatband and the style of crown patch tell us this is a very early one. Perfect for autumn.

View attachment 650963 View attachment 650964 View attachment 650965 View attachment 650966 View attachment 650967 View attachment 650968 View attachment 650969 View attachment 650970 View attachment 650971

Grows on you with each picture!

 

[RickP]

Do I look disappointed?

View attachment 650995

More like the cat that got the cream

Looks sharp!

 

[steur]

Grows on you with each picture!

Thanks, Rick. It's an addiction I'm stuck with it seems.

 

[Mighty44]

It finally arrived.

View attachment 650949

The Mogul

View attachment 650950

Steel blue 100% pure beaver felt. Mustard grosgrain ribbon and bow treatment.

View attachment 650951

Crown 10.5cm
Brim 5.5cm
Ribbon 4cm
Purple brim binding

After a few years of dilly-dallying, I finally added a Hornskov to the collection. Thanks for your patience and kind ribbing Gary @The Shoe

That’s a very special hat!

 

[rogueclimber]

These postings need a bit of an introduction. A large box arrived on my doorstep last week. It contained a kind and extremely generous gift from the north of Italy. Daniele @Daniele Tanto is cleaning up some of his vast collection and found some in my size. Under the ruse of the hats needing work he sent them my way. All most of them needed was the usual steaming, brushing and stretching, but I'm not complaining! So here they are (except for one, which still is on the stretcher).

Cambiaghi heather fedora in brown. Size 56 with the raw edge brim at 6cm and the crown at 10cm at the center dent. Weighs 113 grams. The unreeded sweatband and the style of crown patch tell us this is a very early one. Perfect for autumn.

View attachment 650963 View attachment 650964 View attachment 650965 View attachment 650966 View attachment 650967 View attachment 650968 View attachment 650969 View attachment 650970 View attachment 650971

That felt; such depth to it! WOW

 

[Rmccamey]

That is one classy hom-bowler, Stefan.

For the final one (for now) I've saved a special one.
Panizza Zeffiro in black. Actually a homburg but because of the rather flat topped crown it resembles a cambridge bowler in style close enough for me to keep it open crown. Size 55 (so needed some stretching) with the bound brim at 6cm and the open crown at 13cm. One of the finest Panizzas I've seen and in pristine condition. Weighs 130 grams.

View attachment 650996 View attachment 650997 View attachment 650998 View attachment 650999 View attachment 651000 View attachment 651001 View attachment 651002 View attachment 651003 View attachment 651004 View attachment 651005

 

[Blare]

It finally arrived.

View attachment 650949

The Mogul

View attachment 650950

Steel blue 100% pure beaver felt. Mustard grosgrain ribbon and bow treatment.

View attachment 650951

Crown 10.5cm
Brim 5.5cm
Ribbon 4cm
Purple brim binding

After a few years of dilly-dallying, I finally added a Hornskov to the collection. Thanks for your patience and kind ribbing Gary @The Shoe

Wow… this is a thing of beauty. Congratulations Steve!

 

[Daniele Tanto]

These postings need a bit of an introduction. A large box arrived on my doorstep last week. It contained a kind and extremely generous gift from the north of Italy. Daniele @Daniele Tanto is cleaning up some of his vast collection and found some in my size. Under the ruse of the hats needing work he sent them my way. All most of them needed was the usual steaming, brushing and stretching, but I'm not complaining! So here they are (except for one, which still is on the stretcher).

A few small considerations on these hats happily donated to Stefan.
He has been and perhaps will be again, depending on our mutual addictions, my biggest hat exchanger in the FL universe.
The contacts between Veneto and the Netherlands have been fruitful and full of satisfaction for both of us. We also shared a particular interest in hats made in Italy, their history and their becoming major players in the world of hat making.
I immediately thought of him when I was sorting out the hats to sell, but I also included, deliberately, hats of his size in some deals because they will go along with other magnificent ones from his immense collection.
It is always a pleasure to put some pearls in someone else's treasure chest when you have received some for your own.
I still have hats to give away, but they are for even smaller sizes.
Get in touch without problems, you will only pay the shipping costs

 

[rogueclimber]

Arrived just as I was running out yesterday afternoon

This came from Darle (@Darrell2688 ) and Busted Hats

Beautiful hat -- and was a replacement for the gray one that was lost in the mail (F*#k! USPS!!!)

 

[Steve1857]

Wow… this is a thing of beauty. Congratulations Steve!

Thank you so much, Joe. I'm so happy with it

 

[Blare]

Wormser - Custom Quality
Light to Medium grey with slight lavender hue
About 5 inch Crown as shaped
2 5/8 Brim with 3/8 binding
1 1/8 Grosgrain band with unique styling

This hat, beyond looking very dirty, caught my eye with its very nice ribbon styling with sort of a puggaree look and two wind trolley buttons sewn on for style. Then realizing this was a Wormser a brand I’ve had on my list a while… and not just a late 50s or 60s Wormser likely made by Langenberg/Beaver this one looks to be a bit older.. my guess would be mid late 40s considering the style of unreeded sweat and the liner. Just a guess really on my part. I’m not too sure the history of Wormser… if they ever made their own hats or always had them produced. The liner does say “Styled by Wormser” which might indicate it was made by an outside house. The original pricing was $4.85.. There is a United Hatters, Cap and Millinery Workers International Union tag so it’s definitely post 1934.. again I’m thinking mid to late 1940s.

I was not wrong in my assessment that this hat was very dirty…. However most of that brushed out… in huge clouds of dust. And it shaped up quite nicely… a little steam would smooth out a few creases here and there but it came up real nice. After all that dust came out… the felt in the sunlight shows an almost light lavender hue in the medium to light grey felt. The old soft thin sweatband is still supple… but the surface is starting to get a bit craggy as well as some of the stitching threads are starting to wear away. All in all… considering its shape styling, profile and vintage there is a lot to like about this hat.

This one along with the Game Bird earlier in the week almost take away the sting of watching a 30s Melton slip through my fingertips a couple weeks back…. Almost.

 

[steur]

That felt; such depth to it! WOW

Thanks, Rob. Heather felts are always worth going for.

That is one classy hom-bowler, Stefan.

Hom-bowler: I'm going with that one! Thanks, Randy.

A few small considerations on these hats happily donated to Stefan.
He has been and perhaps will be again, depending on our mutual addictions, my biggest hat exchanger in the FL universe.
The contacts between Veneto and the Netherlands have been fruitful and full of satisfaction for both of us. We also shared a particular interest in hats made in Italy, their history and their becoming major players in the world of hat making.
I immediately thought of him when I was sorting out the hats to sell, but I also included, deliberately, hats of his size in some deals because they will go along with other magnificent ones from his immense collection.
It is always a pleasure to put some pearls in someone else's treasure chest when you have received some for your own.
I still have hats to give away, but they are for even smaller sizes.
Get in touch without problems, you will only pay the shipping costs

Well, nothing I need to add. Perfect illustration of what the Lounge should be all about. Thanks again, Daniele!

 

[steur]

Arrived just as I was running out yesterday afternoon

View attachment 651140

This came from Darle (@Darrell2688 ) and Busted Hats

Beautiful hat -- and was a replacement for the gray one that was lost in the mail (F*#k! USPS!!!)

Ooh, that is a looker, Rob. Classic combination and a nice tall crown.

View attachment 651333

Wormser - Custom Quality
Light to Medium grey with slight lavender hue
About 5 inch Crown as shaped
2 5/8 Brim with 3/8 binding
1 1/8 Grosgrain band with unique styling

This hat, beyond looking very dirty, caught my eye with its very nice ribbon styling with sort of a puggaree look and two wind trolley buttons sewn on for style. Then realizing this was a Wormser a brand I’ve had on my list a while… and not just a late 50s or 60s Wormser likely made by Langenberg/Beaver this one looks to be a bit older.. my guess would be mid late 40s considering the style of unreeded sweat and the liner. Just a guess really on my part. I’m not too sure the history of Wormser… if they ever made their own hats or always had them produced. The liner does say “Styled by Wormser” which might indicate it was made by an outside house. The original pricing was $4.85.. There is a United Hatters, Cap and Millinery Workers International Union tag so it’s definitely post 1934.. again I’m thinking mid to late 1940s.

I was not wrong in my assessment that this hat was very dirty…. However most of that brushed out… in huge clouds of dust. And it shaped up quite nicely… a little steam would smooth out a few creases here and there but it came up real nice. After all that dust came out… the felt in the sunlight shows an almost light lavender hue in the medium to light grey felt. The old soft thin sweatband is still supple… but the surface is starting to get a bit craggy as well as some of the stitching threads are starting to wear away. All in all… considering its shape styling, profile and vintage there is a lot to like about this hat.

This one along with the Game Bird earlier in the week almost take away the sting of watching a 30s Melton slip through my fingertips a couple weeks back…. Almost.
View attachment 651333 View attachment 651334 View attachment 651335 View attachment 651336 View attachment 651337 View attachment 651338 View attachment 651339 View attachment 651340 View attachment 651341 View attachment 651342

Very cool find, Joe. Nice bit of panache with the two buttons on the ribbon. Wormser made very attractive hats.

 

[Steve1857]

View attachment 651333

Wormser - Custom Quality
Light to Medium grey with slight lavender hue
About 5 inch Crown as shaped
2 5/8 Brim with 3/8 binding
1 1/8 Grosgrain band with unique styling

This hat, beyond looking very dirty, caught my eye with its very nice ribbon styling with sort of a puggaree look and two wind trolley buttons sewn on for style. Then realizing this was a Wormser a brand I’ve had on my list a while… and not just a late 50s or 60s Wormser likely made by Langenberg/Beaver this one looks to be a bit older.. my guess would be mid late 40s considering the style of unreeded sweat and the liner. Just a guess really on my part. I’m not too sure the history of Wormser… if they ever made their own hats or always had them produced. The liner does say “Styled by Wormser” which might indicate it was made by an outside house. The original pricing was $4.85.. There is a United Hatters, Cap and Millinery Workers International Union tag so it’s definitely post 1934.. again I’m thinking mid to late 1940s.

I was not wrong in my assessment that this hat was very dirty…. However most of that brushed out… in huge clouds of dust. And it shaped up quite nicely… a little steam would smooth out a few creases here and there but it came up real nice. After all that dust came out… the felt in the sunlight shows an almost light lavender hue in the medium to light grey felt. The old soft thin sweatband is still supple… but the surface is starting to get a bit craggy as well as some of the stitching threads are starting to wear away. All in all… considering its shape styling, profile and vintage there is a lot to like about this hat.

This one along with the Game Bird earlier in the week almost take away the sting of watching a 30s Melton slip through my fingertips a couple weeks back…. Almost.
View attachment 651333 View attachment 651334 View attachment 651335 View attachment 651336 View attachment 651337 View attachment 651338 View attachment 651339 View attachment 651340 View attachment 651341 View attachment 651342

That's a nice find, Joe. Great looking in and out.

Wormsers always seem to be good looking hats.

 

[rogueclimber]

Ooh, that is a looker, Rob

Thank you Stefan. @Darrell2688 makes a hat just my style!

 

[Blare]

Very cool find, Joe. Nice bit of panache with the two buttons on the ribbon. Wormser made very attractive hats.

That's a nice find, Joe. Great looking in and out.

Wormsers always seem to be good looking hats.

Thanks guys. A Wormser of decent vintage has eluded up until now. this one checked the boxes.

 

[steur]

Panizza Super Stella fedora in blue. Size 56 with the raw edge brim at 6cm and the crown at 9,5cm at the center dent. Lovely felt and great colour. Just wish the crown had some more volume. Weighs 117 grams.

 

[steur]

Had to get this even though it doesn't fit me.
Borsalino fedora in a warm grey colour called pomice. Size 59 with the bound brim at 6,5cm and the crown at 10cm at the center dent. Nice lightweight hat at just 96 grams. There is some nap to the felt and it has an elegant ribbed ribbon. It's going to the classifieds, because it's not my size.

 

[Pellie]

Borsalino Sfinge sold by Sools
Date 1976