Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Daniele Tanto

I'll Lock Up
Messages
4,247
Location
Verona - Italia
I dig that hat, Daniele and have never seen a bow done this way.
Thanks, both the two "Classic" I have, the same "big" size, have this not so common bow
If you like one of both I can let them came back to USA :)
bb-marron-7-jpg.321033

Blue 5.jpg
 

Steve1857

I'll Lock Up
Messages
8,862
Location
Denmark
Love it Joe. There must be several stingies in that baby :)

Fox Hats - Custom Made Western

View attachment 322613

Fox Hats - St Paul, MN (likely Langenberg/Beaver Brands)
Bright Bone Felt
5 inch crown as shaped
3 7/8 brim front 3 3/4 sides with 1/8 grosgrain binding
1/4 two ply grosgrain ribbon

Woah Nelly! This is one big hat! Custom Made Western from Fox Hats in St Paul, Minnesota... probably made by Langenberg/Beaver Brands. A super sharp crease in this one. Not sure the age... my guess late 60s early 70s. It is a firm stiff full on Western. Real nice shape over all.. just a few tan spots under the brim.. other than that real clean. A bit out of my comfort zone in styling and size.. but one cool hat for sure.

View attachment 322614 View attachment 322615 View attachment 322616 View attachment 322617 View attachment 322618 View attachment 322619 View attachment 322620 View attachment 322621 View attachment 322622
 
Messages
11,714
Dynafelt - Espresso

BCFA3226-F94D-4083-B34F-84735AC2974E.jpeg


Dynafelt - Water Repellent
Espresso - Dark almost black felt
5 inch crown as shaped
1 5/8 reddish brown grosgrain ribbon
2 inch overwelt brim

This Dynafelt was the travel mate of the chocolate brown Mallory from this weekend. Dynafelt is marketed as “The Water Repellent Fur Blend” And the last one I had gotten wet the water beaded up nicely. This one is a very dark brown almost black espresso color. With a reddish brown ribbon. The liner is pretty neato. This one’s tag shows it’s content breakdown of 85% wool, 10% Fur and 5% other fibers. Which explains its fairly rough texture. Could make a good rain hat if I don’t move it on.

AA02C1CF-D589-4E09-9A74-94C1274B0743.jpeg
3A8784B1-F31A-4EF8-969F-FD104ABC7677.jpeg
8C8768DC-309D-4936-93E2-3337D1134FC8.jpeg
0030CEED-60E7-48F0-9950-777BFFAD992F.jpeg
485611A2-0FF7-40C5-97F9-C6D80B7E9C08.jpeg
FAB3C9E4-4429-495B-92A2-00B7BC140570.jpeg
503052F7-4F46-43DE-B68B-09DBB4DCF995.jpeg
43550C2C-8AB1-42DA-9AD7-2DD49A712FA1.jpeg
D7AC218E-C722-4DA5-A470-145063209914.jpeg
 

Scooterz

Practically Family
Messages
847
Location
The Great Plains
My latest hat acquisition is thanks to Boomerang posting too good a deal on it and no one else snapping it up. I showed restraint for a few days but, it was still there. It is a black Fed IV. My first real black hat. I received it in record time earlier and have been too busy to post this week. I keep wondering what it might look like with a charcoal thin ribbon or a navy one. I do have a vintage rust colored thin ribbon which might be interesting on it.
DSCF0526 (2).JPG

DSCF0527 (2).JPG
 
Messages
11,714
My latest hat acquisition is thanks to Boomerang posting too good a deal on it and no one else snapping it up. I showed restraint for a few days but, it was still there. It is a black Fed IV. My first real black hat. I received it in record time earlier and have been too busy to post this week. I keep wondering what it might look like with a charcoal thin ribbon or a navy one. I do have a vintage rust colored thin ribbon which might be interesting on it.
View attachment 323466
View attachment 323467
Great addition. Nice thing about a black hat is you can accent it with just about any color ribbon and it will look good.
 
Messages
19,001
Location
Central California
I’m not sure what model this 5X Stetson is. It was sold through Miller Hats, and I’ll keep digging.

The bound brim is just under 5” wide and the crown is just under 6 1/2” tall at that back...that’s the “as creased” measurement and I suspect it’s close to 7” open! This is a large hat. 1 3/4” wide crown ribbon dresses it up a bit. I think I’ll lower the crease a bit when I get around to it.

A80FF596-FD96-4140-B311-E017232A0C79.jpeg
F7AB3DAF-9C48-48A5-8981-D91308E403AE.jpeg
FDDDEE8C-7B58-4276-95A1-25687DA4B095.jpeg
D37685FD-5C77-404F-993B-FE61757DA978.jpeg
0631514E-7174-44E5-B4D9-004A7AA45D9F.jpeg
EA013882-C285-4FD7-B800-DE0B44A90E49.jpeg
63187A22-48ED-4DFD-807B-BDAB820097EB.jpeg
325DF747-3ECB-4B6B-9BA2-301489D697E9.jpeg
 
Messages
11,714
I’m not sure what model this 5X Stetson is. It was sold through Miller Hats, and I’ll keep digging.

The bound brim is just under 5” wide and the crown is just under 6 1/2” tall at that back...that’s the “as creased” measurement and I suspect it’s close to 7” open! This is a large hat. 1 3/4” wide crown ribbon dresses it up a bit. I think I’ll lower the crease a bit when I get around to it.

View attachment 323890 View attachment 323891 View attachment 323892 View attachment 323893 View attachment 323894 View attachment 323895 View attachment 323896 View attachment 323897
Wow.. what a hat Brent
 

Rmccamey

I'll Lock Up
Messages
5,866
Location
Central Texas
Wide as the plains, I'd say.

I’m not sure what model this 5X Stetson is. It was sold through Miller Hats, and I’ll keep digging.

The bound brim is just under 5” wide and the crown is just under 6 1/2” tall at that back...that’s the “as creased” measurement and I suspect it’s close to 7” open! This is a large hat. 1 3/4” wide crown ribbon dresses it up a bit. I think I’ll lower the crease a bit when I get around to it.

View attachment 323890 View attachment 323891 View attachment 323892 View attachment 323893 View attachment 323894 View attachment 323895 View attachment 323896 View attachment 323897
 

Forum statistics

Threads
109,253
Messages
3,077,356
Members
54,183
Latest member
UrbanGraveDave
Top