Garrett
My Mail is Forwarded Here
- Messages
- 3,782
Beautiful Knox :eusa_clap
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Post New Hats Here!
- Thread starter Rundquist
- Start date
bond
My Mail is Forwarded Here
- Messages
- 3,535
- Location
- Third coast
Nice ones A.
- Messages
- 15,259
- Location
- Arlington, Virginia
My new NW Hat. More details in the NW Hat thread.
- Messages
- 10,584
- Location
- Boston area
Be still, my heart! WHAT a fantastic lid, Harv...
- Messages
- 15,259
- Location
- Arlington, Virginia
Thanks fellas! Its been a while since I had a new lid, and I am enjoying it thoroughly!
fedoralover
Call Me a Cab
- Messages
- 2,006
- Location
- Great Northwest
A borsy I picked up off ebay. It has a blind stitched edge binding thats really narrow on the top side of the brim. I showed it to Mike at Northwest hats and he was impressed someone could sew it that close to the edge.
fedoralover
fedoralover
T Jones
I'll Lock Up
- Messages
- 6,795
- Location
- Central Ohio
Here's one that I just recently acquired from John Galt. Actually, he gave it to me. It used to be his hat. It started out as a 1950s Stetson, size 7, Nutria Western. John G. resized it to a 7 1/8 LO and converted it over to a fedora. I really like this Nutria felt. It took a dry crease very well. I used a little steam to add the finishing touches and set the crease. I went with a Center Dent. The over all height of its straight sided crown is nearly 5 inches tall, as creased. I creased it to 4 1/2 inches at the pinch to 4 inches in the back. The brim is 2 3/4 wide. The contrasting medium brown ribbon is an 1 1/2 wide with a double bow, I hid the stitching on the bow work. John Galt did an excellent job on this conversion. I'm really happy with it. My thanks to John G.... I strongly recommend him for your next hat refurb or conversion project...
Before:
After:
Before:
After:
Last edited:
- Messages
- 15,259
- Location
- Arlington, Virginia
Nice job Terry. The bow looks fantastic!
- Messages
- 15,259
- Location
- Arlington, Virginia
Ooooh. Can't wait to see that, Dan!
T Jones
I'll Lock Up
- Messages
- 6,795
- Location
- Central Ohio
Thanks Harv. I think you're really going to be pleased with the results after John Galt finishes your hats.
fedoralover
Call Me a Cab
- Messages
- 2,006
- Location
- Great Northwest
Here's one that I just recently acquired from John Galt. Actually, he gave it to me. It used to be his hat. It started out as a 1950s Stetson, size 7, Nutria Western. John G. resized it to a 7 1/8 LO and converted it over to a fedora. I really like this Nutria felt. It took a dry crease very well. I used a little steam to add the finishing touches and set the crease. I went with a Center Dent. The over all height of its straight sided crown is nearly 5 inches tall, as creased. I creased it to 4 1/2 inches at the pinch to 4 inches in the back. The brim is 2 3/4 wide. The contrasting medium brown ribbon is an 1 1/2 wide with a double bow, I hid the stitching on the bow work. John Galt did an excellent job on this conversion. I'm really happy with it. My thanks to John G.... I strongly recommend him for your next hat refurb or conversion project...
Before:
After:
What a coincidence, I found a Stetson Nutria size 7 at Goodwill a few months ago and for 8 dollars I couldn't pass on it. It has a 3 1/2 inch brim and I left it at Northwest Hats to be converted also. Whenever Mike gets around to it he will make it into a fedora too. It's great seeing how well yours turned out, as it gives me an idea on how mine will look. I'm going to have an edge binding put on mine with a shark gill bow.
Yours turn out fantastic! Does yours have the Nutria Liner in it? The sweatband in mine was toast but since it needed to be resized it was going to get replaced anyway. It's great to breath some life back into these hats that may have just ended up as a work hat or thrown away.
fedoralover
DOGMAN
One Too Many
- Messages
- 1,625
- Location
- Northeast Ohio
Last weekend went to the estate sale of philanthropist Alvin Gray.Found a hat with his initials in the sweat band.http://reso[URL=http://s598.photobu...lbums/tt61/gokutdog/013_zps81b5d4d3.jpg[/IMG]urces.chuh.org/Archives/Al%20Gray%2045.jpg[/url]
Last edited:
DOGMAN
One Too Many
- Messages
- 1,625
- Location
- Northeast Ohio
I found information that Mr Gray was the official restorer of the Enola Gay and Hawker Hurricane planes for the Smithsonian Institute.
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
T Jones
I'll Lock Up
- Messages
- 6,795
- Location
- Central Ohio
Thanks buddy...$8 for a Stetson Nutria was definitely a bargain. I wish I could find stuff like that. Mine didn't have the liner. I don't know if it originally came without one, or if it was just missing. The original nutria sweat was still intact though, and although it shows signs of wear, it's still soft and supple. I wanted to keep something original to the hat so it could be identified as a Stetson Nutria. I thought it was a shame not to reuse the sweat somehow even though it was a size 7 and I'm a 7 1/8 LO. So, John Galt worked out a solution of sewing on a piece in the back from another sweat band for an expansion patch. It worked out great. I got to keep the original sweat after all, just the way I wanted. I'm really happy with it. Good luck with your Nutria. I can't wait to see how yours turns out.
DOGMAN, that's a very nice find. That is one sweet looking hat. I really like that one!
