Chinaski
One Too Many
- Messages
- 1,045
- Location
- Orange County, CA
Well there you have it. Thanks rlk...
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Post New Hats Here!
- Thread starter Rundquist
- Start date
Featured products
-
Gustin Vintage Heavyweight Sweatshirt - Natural Rainbow Nep - $119 Rugged 14oz cotton that gets better with every wear. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Iron and Resin - Buffalo Shirt - $119 Classic, yet modern. 6.5oz yarn dyed cotton flannel with a warm micro polar fleece lining.
rlk
I'll Lock Up
- Messages
- 6,100
- Location
- Evanston, IL
- Messages
- 17,466
- Location
- Maryland
Brad, Thanks! I took a photo with the sweat pulled back. It looks like the later to me. If you want a photo from another angle or a close up let me know.
Last edited:
- Messages
- 17,466
- Location
- Maryland
B.J.H., Hatophile, Wade, Thanks! 
DRB, Thanks! I think Gus is just set in his ways. The only thing he didn't deliver was crown height. I requested 6 inches but he gave me about 5 1/2.
Monbla256, Thanks too! I believe the felt was marked camel but there is a greenish tone (what made me pick it) that is lost with the flash.
Mr Vim, Really like the look of your Failsworth!
DRB, Thanks!
I think Gus is just set in his ways. The only thing he didn't deliver was crown height. I requested 6 inches but he gave me about 5 1/2. Monbla256, Thanks too!
I believe the felt was marked camel but there is a greenish tone (what made me pick it) that is lost with the flash.Mr Vim, Really like the look of your Failsworth!
Last edited:
Great looking lid!
BanjoMerlin
A-List Customer
- Messages
- 477
- Location
- New Hampshire, USA
The really thin ribbons were and still are a very common treatment for western hats. Just enough to cover the sweatband stitches.
They are easily removed if the owner wants a fancy hatband and easily replaced when they get all discolored by sweat and dirt.
Nice find!
- Messages
- 10,524
- Location
- DnD Ranch, Cherokee County, GA
That is a nice find, especially at that price. Single ply or 2 ply ribbons are quite common & lots of folks chose to leave them on while putting on a horsehair or fancier hatband.
Brad Bowers
I'll Lock Up
- Messages
- 4,187
Brad, Thanks! I took a photo with the sweat pulled back. It looks like the later to me. If you want a photo from another angle or a close up let me know.
Thanks, yes, it's tape-and-reed. I don't think I've seen a modern one match so closely, though. Very nice!
Brad
RobFedoraField
One Too Many
- Messages
- 1,052
:arated:
RobFedoraField
One Too Many
- Messages
- 1,052
I was in Cincinnati about 3 weeks ago. Stopped by Batsakes and had a nice talk with Gus Miller. Decided on a custom, 5 1/2 inch crown and 2 1/2 brim which arrived today.
Nice! Gus made my very first "real" hat! I really need to get back down there and pick up another one. put a 1/2" binding on that hat and it'd be the #2 hat on my wish list (1st one being a grey stratoliner)
RobFedoraField
One Too Many
- Messages
- 1,052
Here's the newest hat folks, the hat is a Failsworth, I've never heard of the brand but she's a beauty.
That is a great combo!
Chinaski
One Too Many
- Messages
- 1,045
- Location
- Orange County, CA
Here's the older version:
Robert, thanks for including these two pictures. It's very helpful in comparison to the Stetson ad you posted. I can recall seeing at least one example of a No 1 Quality posted by ScottF, and it was definitely the older version. I didn't know there were two versions, but the sweatband pictures make it very evident! Thanks again.
Mr E Train
One Too Many
- Messages
- 1,050
- Location
- Terminus
The mailman delivered a new moonstone Fed IV a little while ago. It seemed to call out for a more devil-may-care crease befitting its '30's styling, so I gave it a quick diamond bash and then sprayed it with a little distilled water and let it dry to help it set.
Joshbru3
I'll Lock Up
- Messages
- 4,409
- Location
- Chicago, IL
Adam Executive Belmont
I got this hat yesterday. I won it on ebay about a week ago, but it needed a lot of crown work, steaming, cleaning, and brushing. Did some work on it tonight. I rubbed 3 light coats of lotion into the leather sweatband. The lotion preserved the sweatband perfectly when I steamed the hat. The sweatband is now smooth as silk. I decided to go with a center dent crease on this hat. I usually bash everything with a c-crown, but with the high crown, I felt that a center dent would really give the hat a "natural" crown look. There will be a ton more pictures in the ADAM ALLEY thread, but here are a few before and after photos.
Before:
After:
I got this hat yesterday. I won it on ebay about a week ago, but it needed a lot of crown work, steaming, cleaning, and brushing. Did some work on it tonight. I rubbed 3 light coats of lotion into the leather sweatband. The lotion preserved the sweatband perfectly when I steamed the hat. The sweatband is now smooth as silk. I decided to go with a center dent crease on this hat. I usually bash everything with a c-crown, but with the high crown, I felt that a center dent would really give the hat a "natural" crown look. There will be a ton more pictures in the ADAM ALLEY thread, but here are a few before and after photos.
Before:
After:
Mr E Train
One Too Many
- Messages
- 1,050
- Location
- Terminus
That looks great! I like the teardrop telescope crease it came with because it's different, but the proportions didn't look right. It looks way better now. Nice job!
Mr. Paladin
My Mail is Forwarded Here
- Messages
- 3,133
- Location
- North Texas
Very nice work on that crown, Josh. The center dent is perfect for it and the ribbon is very distinctive. Well done!
