Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Photos of hatters tools

Hatter4

One of the Regulars
Messages
226
Location
East Petersburg, PA
just a quick note to say I am still around but have had a lot of health issues and have stopped making hats.Hope to be back at it soonhope to hear from old friends. thanks
 

ChicagoWayVito

Practically Family
Messages
699
There is no big enough rounding jack for me.

LOL, nice. The rounding jack I got from JW Hats will go up to 6 inches which is within your "dream" brim size. I recently learned CNC milling, I may have to make one that can go up to 8 inches but finding the felt that large will likely be a challenge.
 

John Galt

Vendor
Messages
2,080
Location
Chico
Well, life is returning to normal on my end, and it looks like I got back in time to contribute some photos to keep this thread going.

Here is a Roberts, Cushman & Co. Name-O-Grammar sold by National Hatters Supply Co., Inc.

db41d7f31477166afe937caa71b7a9fc.jpg


336218b3fbcfcad7a298d5c7a39f6f34.jpg
51eb33c2999d89af352fd29125a39744.jpg
 

John Galt

Vendor
Messages
2,080
Location
Chico
Some stiff bristle cleaning brushes, and soft bristle brushes, respectively. Also a standard hat brush. The stiff cleaning brushes can be found at dry cleaning suppliers. Be careful, and read Ermatinger on how to use them.

3c5b87ea9bea1dc67286e03509edf8e7.jpg


8d43d3d23e0f40a88c26511711a39e93.jpg


8ace7a1b8ecf3298dac37a724d016405.jpg
 
Last edited:

John Galt

Vendor
Messages
2,080
Location
Chico
A brass band block. These are hard to find, and I only just got it. I've always had to use a stretch block, but this is very nice to have if you are lucky & determined enough to find one.

c8bff47442866641a474ff6c458c8d93.jpg
 

John Galt

Vendor
Messages
2,080
Location
Chico
And something I have only seen a few times before, but find useful, flanging springs. A blocking cord (second photo) is more readily available and often used instead.

ba0f0b23f6d2d6732bb35d5694ff794a.jpg


f59f4fc888f83f4771f654b415c29cf8.jpg


I've used parachute cord with a little paraffin, but a real blocking cord is pre-waxed and stiffer to start, and as a result has a much tighter hold. I leave a long tail on the knot to help un-cinch it.
 

John Galt

Vendor
Messages
2,080
Location
Chico
just a quick note to say I am still around but have had a lot of health issues and have stopped making hats.Hope to be back at it soonhope to hear from old friends. thanks

Really sorry to hear that Oliver. You've always been a gentleman and a good friend to this forum and this thread.

I hope you get well soon and get back to doing what you are passionate about. I will be praying for you.

Best wishes, always!

John
 

John Galt

Vendor
Messages
2,080
Location
Chico
Catching up on this thread. Following HumanShoes' post, here's a hat/coat rack I made by laminating a 4x4 post with sanded (unsealed) cedar fence boards.

e88706d71b3dbe3c4e7b012407a2f645.jpg


The bottom is mounted on a yard umbrella stand. I used a hole saw and a bolt to do that bit. If I do this again, I'll use blocks instead of a full post - this thing is very heavy.

4aa0e0f288378e39e742627a9c69df27.jpg


Now that I have a thickness planer, I would also laminate with thinner boards. The planer makes well chosen fence boards (about $2.34 each at Lowes) look very beautiful with less work than sanding. I found mine, a DeWalt, on Craigslist for $100. Here are some scraps left over from a closet I lined. Left is planed, right is the "meat side" of a planed board.

79e26c405cb13ad8521ab150910df058.jpg


The cedar helps keep those pesky moths at bay.
 

Forum statistics

Threads
109,244
Messages
3,077,119
Members
54,183
Latest member
UrbanGraveDave
Top