Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Darrell2688

A-List Customer
Messages
419
Location
Piner, Kentucky
Hi Bilal,
Atlanta? I thought that you were out west or north west any way. So how are things in Atlanta?
Check your messages up in the top right next to your name.
 
Messages
19,001
Location
Central California
Hi Brent,

I am sorry but no I do not have a block over 60cm RO, I think that I would need a 63cm LO block for that hat size, correct me if I am wrong. I can always try to get a 63cm LO block, however I know Clint has enough orders to keep him in the work shop until the end of January. The only way to get a block faster would be to go with one of those blocks made of plastic.

It would be great if I did.


Do you get your blocks from Clint Crump? I’d go haves with you on one of his blocks and you can keep the block if you’re interested? I’m not in any hurry…and yes, think it would need to be a 63cm LO block.
 

Darrell2688

A-List Customer
Messages
419
Location
Piner, Kentucky
I will check with Clint and see when he might be able to get a block made for me. The other problem is the flange. This hat has a 3" wide brim, but the snap works perfectly. By the way what color felt would you want for this style hat? I only have rabbit felts on hand, one of these days I will get my hands on a beaver felt to work with.
 

gam

New in Town
Messages
24
Location
Ontario
I've re-worked around 14 hats so far, all of the brims the same size as when I got them (2 1/4 to 4 "), as

I"ve been reluctant to trim any of them down since I don't have a rounding jack.

So, I picked up an old, faded, beat up wooly to practice on (almost free and only 10 minutes away).

Since I don't have a real rounding jack, I improvised one.

brim trim.jpg

It worked out way better than I hoped. The rotary cutter did a nice crisp, clean, even cut - no sanding or touch-up necessary.

The block was cut 1/8" narrower than the final dimension, and the pink disc at the cutter's hub rides against it, so I can keep the cutter away from the wood and perpendicular to the brim.
 

TheRedBlueBlur

New in Town
Messages
1
Well it has been a while since I posted anything on the forum and I just finished a fedora that I just finished so I thought that I would post a few photos of my work. I have a couple of hats posted for sale on Ebay with a lot of people watching. Any way I have come up with a name for my hats and here is my latest creation.
View attachment 561281 View attachment 561282 View attachment 561283 View attachment 561284 View attachment 561285 View attachment 561286 View attachment 561287
Hi, I’m totally new here and only dipping my toe in the world of hat making, but do you mind me asking how many blocks you need? It’s probably a stupid question, but do you need one per size?
 
Messages
10,883
Location
vancouver, canada
Hi, I’m totally new here and only dipping my toe in the world of hat making, but do you mind me asking how many blocks you need? It’s probably a stupid question, but do you need one per size?
You need two per size. To make a proper custom hat you need to fit the head's shape. not just size Men are for the most part either long oval or regular oval. So you need to cover the size range, (size 7 up to 7 5/8" and you will have most covered) in both long and regular oval. Then you have to decide which block profile you want to offer. The two most popular are #51 & #52 but shapes/profiles are almost infinite in their variety.

Then you need to decide how tall you want the open crown to be. Technicaly you need a block for each block height you plan to offer. (but there is a workaround). I know a hatter that owns over 3000 blocks and another 3000 flanges. I have a very very modest collection of 50 blocks and about the same number of flanges. It is a rabbit hole in which hatters fall into.

Collecting blocks & flanges is a lifetime's work.
 

Darrell2688

A-List Customer
Messages
419
Location
Piner, Kentucky
I recently contacted Clint and he was down with the Flu all last week and he is just now getting better. He told me that thay have had a lot of snow fall so he is pretty much stuck in side right now but plans to be back out working on the hat blocks orders next week. He is working on a different style block, one with a removable bottom section, he didn't go into details but I am guessing a 6" tall crown with a removable 1 1/2" thick bottom.
Clint has 2 CNC machines right now, one to make the rounded tops and the other to make the base sections, he told me that it takes him about 2 hours per block on the cutting part, gluing the sections together and then applying Varethane takes a bit longer.

Does any one know how tall a block would need to be to make a hat for a woman?

Does 4 1/2" or 5" tall sound about right?
 

shopkin

One of the Regulars
Messages
124
Beavers and nutria are both rodents. Mink, otters and other weasel-shaped animals are not rodents.
 

Darrell2688

A-List Customer
Messages
419
Location
Piner, Kentucky
I recently posted a black fedora on Ebay for sale, one thing is for certain you get a number of people that put your item on their watch list. The hat is posted for sale and I think that they are waiting to see if I drop the price. I have seen a few hats on Ebay that I am interested in, I am looking for mainly fyr felt hats in brown or sable color, high crowns and wide brims, something that I can put some work in and give the felt a new or old shape. I found a Stetson 4x beaver, the size is too small and the brim width is 3", so I had to walk away from that one. Here is a photo of the fedora that I posted on Ebay.
20231231_204947.jpg
20231231_204952.jpg

I did have a different bow knot in it before, black with a touch of gray, however after some thought I decided to change it to this style bow knot. Believe it or not this hat does have a snap brim, it is a size 7 3/8" with a 2 7/8" wide brim.

Happy New Year to everyone here on the Fedora lounge, I am really thankful to be a part of this great community, The Fordua Lounge members are friendly and always willing to help another member with information that will help with problems that they may encounter while working on hats. I thank you all for the help that you have provided and continue to provide. I hope that everyone has a great prosperous 2024.

Darrell
 

Hatneophyte

New in Town
Messages
5
You need two per size. To make a proper custom hat you need to fit the head's shape. not just size Men are for the most part either long oval or regular oval. So you need to cover the size range, (size 7 up to 7 5/8" and you will have most covered) in both long and regular oval. Then you have to decide which block profile you want to offer. The two most popular are #51 & #52 but shapes/profiles are almost infinite in their variety.

Then you need to decide how tall you want the open crown to be. Technicaly you need a block for each block height you plan to offer. (but there is a workaround). I know a hatter that owns over 3000 blocks and another 3000 flanges. I have a very very modest collection of 50 blocks and about the same number of flanges. It is a rabbit hole in which hatters fall into.

Collecting blocks & flanges is a lifetime's work.
Dear Belfastboy,

I have been following your advice and just subscribe to this website to respond to you on this one.
I am new to the business and used to use shaped block to do hats (I am new hatmaker in Tunisia since one year). I would like to go to the next level now and shape by hands, I have contacted hatblockpoland and would love to get your advice as my order will cost me a lot of money since I will take from 55cm to 62cm. for #51 and #52. I am correct if I order that ? he just responded this to me "I know the shapes, what should the oval of the bottom of the crown be, long oval, full, slim? To be sure, tomorrow I will send you drawings of the ovals and you will decide, okay." I would love that you guide me in this order because it will cost a lot of money.

I have a conformateur Allie Maillard, and most of the shapes I have are either long oval, small long oval or pear. I am confused on what block exactly using :

1) do you use the type of block depending on the shape of the client's head or do you use the type of block depending on the shape above you want it to be (diamonds, fedora, stetson etc)

2) as I am starting I will be ordering 51 and 52 but what is the real difference in terms of finishing ?

3) can I contact you privately and take me through the order, since it is a big one maybe you should tell him that I come from you ... I am expecting a discount :) loooolll
 

Hatneophyte

New in Town
Messages
5
Show a picture of your conformateur. Those shapes still look weird to me. A majority of heads (men) are regular oval and all those look to be very long oval.
See below my conformateur, it is worth mentioning that 70% of our clients are women for now (we are relatively new in the business)
 

Attachments

  • IMG_5617 - Grande.jpeg
    IMG_5617 - Grande.jpeg
    277.6 KB · Views: 66
  • IMG_5616 - Grande.jpeg
    IMG_5616 - Grande.jpeg
    194.4 KB · Views: 63
  • IMG_5615 - Grande.jpeg
    IMG_5615 - Grande.jpeg
    164 KB · Views: 74

Forum statistics

Threads
109,659
Messages
3,085,858
Members
54,480
Latest member
PISoftware
Top