Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

humanshoes

One Too Many
Messages
1,446
Location
Tennessee
Messages
10,847
Location
vancouver, canada
This is for Scooterz. Pics of comparison: Agnoulita Carmel middle, two Win chester beaver Pecan, Winchester beaver Camel right side, the two Pecan are left and on top of the Carmel. The left Pecan is from a decade ago, the top is recent. Two very different colours....it is not just the light. The Agnoulita is a softer beige/brown, the Camel has more yellow in it. ....both good colours.
CIMG2295.JPG
 

Scooterz

Practically Family
Messages
847
Location
The Great Plains
This is for Scooterz. Pics of comparison: Agnoulita Carmel middle, two Win chester beaver Pecan, Winchester beaver Camel right side, the two Pecan are left and on top of the Carmel. The left Pecan is from a decade ago, the top is recent. Two very different colours....it is not just the light. The Agnoulita is a softer beige/brown, the Camel has more yellow in it. ....both good colours. View attachment 313413

Thanks. Very interesting the difference in the pecan felts over time. I like the carmel. Did you make the camel hat with the curl?
 

Melkat88

New in Town
Messages
24
Location
Berlin
If you are working in metric sizes then I block 1 full centimetre larger. My blocks are all in full centimetre increments so for my size 59 head I block on a size 60cm block.
Hi, great question and answers. I'm trying to perfect my fitting-skills too.
With this sample, how long would you cut the sweatband then?
And which angle do you cut it?
Greetz to y'all!!
 
Messages
10,847
Location
vancouver, canada
Hi, great question and answers. I'm trying to perfect my fitting-skills too.
With this sample, how long would you cut the sweatband then?
And which angle do you cut it?
Greetz to y'all!!
I am a size 59cm....so block on a 60cm block. I cut my sweats to 59cm at the reed then 'drum' them by cutting back at an angle of about 5 degrees each side. I have a set of band blocks in centimetres and use these as sizing checks for the sweats. I tape the ends together, check the fit on the band block before stitching the ends together.
 

Melkat88

New in Town
Messages
24
Location
Berlin
I am a size 59cm....so block on a 60cm block. I cut my sweats to 59cm at the reed then 'drum' them by cutting back at an angle of about 5 degrees each side. I have a set of band blocks in centimetres and use these as sizing checks for the sweats. I tape the ends together, check the fit on the band block before stitching the ends together.
Perfect! I think i need to start collecting band blocks...thats the best way for me I think. It always not easy with oval heads or extremly round...fitting is an art itself, I've got that feeling.
I have now a loooot of half sizes 56,5 cm and so on...how do you handle those.

Thanks for the angle!!!! I was searching for this for months. <3 <3 <3
 
Messages
10,847
Location
vancouver, canada
Perfect! I think i need to start collecting band blocks...thats the best way for me I think. It always not easy with oval heads or extremly round...fitting is an art itself, I've got that feeling.
I have now a loooot of half sizes 56,5 cm and so on...how do you handle those.

Thanks for the angle!!!! I was searching for this for months. <3 <3 <3
I have learnt thru trial and error that getting the felt blocked to the right size makes everything downstream of that flow so much smoother. I have a few blocks in half sizes but not the entire range. If I add a layer of duct tape (thicker Gorilla tape works well) to the block it adds a 1/2cm. It wqorks well unless the felt is very thin then there is a risk of the line showing. I use a layer of painter's tape first as that facilitates the removal of the duct tape. I then add a layer closer to the top where the block begins to taper.....the taper makes it impossible to apply the duct tape flat so I only tape about half way up until the taper begins then use a top layer of the painter's tape to lessen the ridge created by the duct tape. Then the properly sized leather sweat should just drop into the blocked felt with a perfect fit. If it doesn't it tends to cause a ton of problems as I attempt to sew the sweat in place. Get the fit right and it should just flow. I cut my own band blocks out of 2x8" planks....using my blocks as the footprint, cut by scroll saw then a bench edge sander to finish to size. Costs about a dollar for the wood and then time.
 

Forum statistics

Threads
109,244
Messages
3,077,115
Members
54,183
Latest member
UrbanGraveDave
Top