Thanks a lot Marc! I liked the design, just wanted to adapt it a bit for a leather jacket. Now that I know what to look for I can disect it a bit further.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Five Star Leather Jackets
- Thread starter TooManyHatsOnlyOneHead
- Start date
Thanks a lot Marc! I liked the design, just wanted to adapt it a bit for a leather jacket. Now that I know what to look for I can disect it a bit further.
Pockets are a bit small right, I thought it just seemed small after working on the design for a bit of time but I also feel I'd like them a bit bigger. It is cleaner without that side panel, thank you, Jin.
Jin431
Call Me a Cab
- Messages
- 2,912
- Location
- Bay Area CA
On photos yes it does seem a bit small but I think it's also because of having side panels that make it seem smaller. It's still a working design so it's easy to chop and change. How will the back of the jacket look?
I made a few more variants, I definitely like the hand warmers bigger and I've added two designs for the back. Sorry for the pictures spam
Marc mndt
I'll Lock Up
- Messages
- 7,348
I vote E but with 5 buttons. And b2.
Jin431
Call Me a Cab
- Messages
- 2,912
- Location
- Bay Area CA
It's getting there! Yes E is where it's at at the moment and I agree it will look better with 5 large buttons. B2 but without the waist band since the front design doesn't have a bottom band.
Jin431
Call Me a Cab
- Messages
- 2,912
- Location
- Bay Area CA
That's so much better! Just play around with the chest pocket placement and collar and call it a day! Great job on thus
It’s so cool that we have a maker we can just throw all this stuff at, and depending on what you are doing, have the jacket made for around $300 bones and delivered in two weeks. @Riu once you have your design locked, spend an equal amount of time on the measurements. If you haven’t already, look back through this thread and look at what to provide. I suggest everything. Do that and you will be exceedingly surprised and delighted. Can’t wait to see the end result!
Looks pretty good to me. Nice not to have a waistband. Personally I don't like the look of waistbands on any jacket design, they kind of cut off or divide a nice clean design to me. Without a zip on the top pocket it helps to have the thiner piping along the pocket entry and angling it also makes the look more natural and less stiff. Do you think the side pocket entry should better match the chest pocket? I'm on the fence on this. I would consider a slightly larger collar shape.
wow what a grain... perhaps remodel the end of the belt at least to make it easier to get into the buckle and looking better
abone
A-List Customer
- Messages
- 429
- Location
- British Columbia
The jackets probably finished by now. I’ll see how the final pics look. As I mentioned in another reply to this topic, I have a Vanson Oxford and although not a half-belt, it does have cinch belts that are oriented the same way as this, and for sure I have to take the jacket off to tighten or loosen.
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
I mean not the orientation, just the tip of the belt strap looked very square ] on the pic, perhaps a slightly ) or > would work better, they probably can be adjusted even after the jacket is finished just cut a little and top stitch back again.
abone
A-List Customer
- Messages
- 429
- Location
- British Columbia
Now that I hadn’t noticed.... and for sure it being squared off doesn’t look right. I’m on it!
I was so enamoured by the grain I hadn't noticed the details like this!
yeah probably better with slimmer pocket trim on the handwarmer too, I just angled the chest pocket removed the zip and brought it down a bit, drop/ curved the front hem a bit to match the angled cuff, and angled the handwarmer a bit more , and modify the collar
from Riu's last pic.
Sorry Riu, I hope you're alright with this... much easier to just edit your pic than typing
since you bank the whole design on that piped pocket, how about make it bigger like this, so it looks more balanced perhaps.
and this one is just for my own satisfaction
Last edited:
yeah probably better with slimmer pocket trim on the handwarmer too, I just angled the chest pocket removed the zip and brought it down a bit, drop/ curved the front hem a bit to match the angled cuff, and angled the handwarmer a bit more , and modify the collar
from Riu's last pic.
Sorry Riu, I hope you're alright with this... much easier to just edit your pic than typing
View attachment 307941
since you bank the whole design on that piped pocket, how about make it bigger like this, so it looks more balanced perhaps.
and this one is just for my own satisfaction
View attachment 307940
You got my attention with that curve
yeah probably better with slimmer pocket trim on the handwarmer too, I just angled the chest pocket removed the zip and brought it down a bit, drop/ curved the front hem a bit to match the angled cuff, and angled the handwarmer a bit more , and modify the collar
from Riu's last pic.
Sorry Riu, I hope you're alright with this... much easier to just edit your pic than typing
View attachment 307941
since you bank the whole design on that piped pocket, how about make it bigger like this, so it looks more balanced perhaps.
and this one is just for my own satisfaction
View attachment 307940
That's it Navetsea - nice work. You got me wanting one of these now.
yeah probably better with slimmer pocket trim on the handwarmer too, I just angled the chest pocket removed the zip and brought it down a bit, drop/ curved the front hem a bit to match the angled cuff, and angled the handwarmer a bit more , and modify the collar
from Riu's last pic.
Sorry Riu, I hope you're alright with this... much easier to just edit your pic than typing
View attachment 307941
since you bank the whole design on that piped pocket, how about make it bigger like this, so it looks more balanced perhaps.
and this one is just for my own satisfaction
View attachment 307940
Brilliant! The beauty of having other creative minds around you
It's more cohesive now, cleaner and I like it. The only thing is the hand warmers they're a little too big for my liking and I like them to be aligned with the bottom seam. Apart from that, I can say it improves the design a lot.I like a clean minimal look without anything to stand out too much, I have tried to align the hand warmers angle with the chest pocket.
I don't like waistbands either, this is getting right where I wanted with ideas from everybody. And of course, I'm ok with you editing the design - that's why I even made it like this instead of just a sketch as it's much easier to visualise it.
It's really nice to play with those organic lines @navetsea, I'm sure you could push it further to your liking
Indeed it's a great opportunity to be able to throw our designs to Shawn and get such results. I'm still waiting to discuss some details with him for my CR and I want to see how that turns out first but when I saw this jacket I thought it would be a good opportunity for a new design and I'm really glad I posted it here.
If anybody wants to use the design, feel free to do so. This is pure fun and if it helps anybody with some ideas, even better
Last edited:
Similar threads
