Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Workboots, how should they be worn?

I like to wear my workboots...

  • as beat up as possible

    Votes: 4 7.7%
  • well worn

    Votes: 35 67.3%
  • like I wear my dressshoes, polished to a high shine

    Votes: 13 25.0%

  • Total voters
    52

RiteStuffBryan

One of the Regulars
Messages
127
Theoretically engineer boots with pants worn over them would be a good option for firemen and engineers to wear because then coals wouldn’t be able to get into their boots. The taller heel would be a liability on the ladder they climb to get into and out of the car though.

That said, I’ve just never seen any evidence of trainmen actually wearing engineer boots. I’m afraid I might have to write a myth busting article about it to go along with my wabash myth and chinos and T-shirt myth ones lol
 

dudewuttheheck

I'll Lock Up
Messages
4,392
How are laced boots more practical than non-laced boots?
Fit. For walking, laced boots are more secure in general and you can semi customize the fit by adjusting how tight or loose the laces are. I much prefer the look of engineers, but hiking in engineers would likely lead to twisted ankles more than hiking in lace up boots for example.

Also, they're not thay much easier to clean and polish. Yes, you have to take the laces off with lace up boots, but my lace up boots are usually around 6" and my engineers are usually 11" so that extra leather that needs polishing negates any time saved.
 

navetsea

I'll Lock Up
Messages
6,821
Location
East Java
I got a feeling that people of that age have spare time of a long evening hours with nothing to do, so cleaning their boots or sharpening their knife or doing something else is a welcome activity to kill boredom before they feel sleepy, I don't think they polish their work boots though, perhaps they just brushed off loose debris and dried mud, and occasionally grease it, I don't think they detail cleaning the welt or repaint the edges or any meticulous things modern leather shoes aficionado would do in their cleaning routine.
 

hardlyworkingman

One of the Regulars
Messages
101
Fit. For walking, laced boots are more secure in general and you can semi customize the fit by adjusting how tight or loose the laces are. I much prefer the look of engineers, but hiking in engineers would likely lead to twisted ankles more than hiking in lace up boots for example.

Also, they're not thay much easier to clean and polish. Yes, you have to take the laces off with lace up boots, but my lace up boots are usually around 6" and my engineers are usually 11" so that extra leather that needs polishing negates any time saved.

Besides fit, in the field if laces are broken and you have no backup, you can pretty much jerry rig them. The only boots i now have, that have no laces are snowboard boots with BOA [convenience on the mountains trumps fit for me]
 

Fifty150

Call Me a Cab
Messages
2,103
Location
The Barbary Coast
Maybe it's silly altogether to judge $1k+ boots by workboot standards,




Construction job sites. Factories and manufacturing plants. Utility towers and poles. Roofers. Correctional facilities. Plumbers. Sewage plants. Building trades. Trenches. Fire stations.


I've never seen a worker wearing $1,000 boots. Some workers have boots provided by the employer. Some people will buy their own boots. And the boots that they buy, are dictated by their budget. The more money that they make, the more they can afford to spend. Sure, you might have some people ordering Pacific Northwest boots. But most people are wearing the boots that cost under $300. Usually under $200.

Their boots are caked in mud & dirt, soaked in raw sewage, and exposed to chemicals. The goal is get 1 year before having to replace them. Nobody is trying to keep a boot forever. Nobody is spending $300 for some shoe artisan to recraft their work boots with a hand stitched welt.
 

Fifty150

Call Me a Cab
Messages
2,103
Location
The Barbary Coast
Those aren't just any model of boot sold by a Pacific Northwest boot company.

Wildland Firefighting is a unique niche. Like logging, and linemen. They have specialty boots, unique to their trade. A lineman climbing a utility pole needs to have lineman boots. Even motor officers wear Pacific Northwest motor officers boots.

I suppose it all depends on who your employer is. Some employers give you a uniform allowance. Some employers issue boots. Some guys just have to pay out of pocket, then try to write it off their taxes as a work related expense.


A firefighter would be better able to explain it. There is a specification from NPFA, for the boots. There are other styles of firefighting boots which are not Pacific Northwest style. There are modern designs. But I suppose it depends on who you work for, and what the culture is at that place of employment.



A lot of police departments still wear those high Wesco motor boots. And they order them from Wesco. It's a part of the culture. It's their tradition. They could wear other boots. They could wear modern riding boots. But they stick to that boot.



 

Fifty150

Call Me a Cab
Messages
2,103
Location
The Barbary Coast
A homeowner does light maintenance around the house. Yard work, but not a landscaper by trade. Install appliances as needed, hook up gas and water lines, and repair those appliances when the time comes. Simple things like valves and actuators in a washing machine, the ignition in an oven, or the motor in a pair of hair cutting clippers. Clear clogged drains. Not really a plumber or electrician. Climb a ladder. Paint a wall. Inspect a roof. Just a guy who has to fix things around the house. Auto maintenance in the driveway. Oil changes. Transmission service. Brakes. Install a stereo.


These are my homeowners shoes. Almost 10 years old. But I'm not wearing them every day. Waterproof in case I have to go out in the rain to fix something. Steel toe in case something falls. I'm not trying to own these for life. I doubt if I will resole them. They are Goodyear welted. There's a plastic rubber welt, sewn to a rubber compound midsole. An incompetent cobbler could peel away the outsole, sand down the midsole, and glue on a new outsole. A skilled artisan could deconstruct and rebuild these with a new welt, midsole, outsole, etc. But that would cost more than I paid for the shoes. I will buy cheap work boots every decade. At this rate, these could last 2 decades. I' doubt that I will ever invest $600 into work boots.








Screenshot 2024-11-01 21.05.09.png
Screenshot 2024-11-01 21.06.28.png
IMG_20241101_210055790.jpg
IMG_20241101_210232310.jpg
 

Tom71

Call Me a Cab
Messages
2,675
Location
Europe
Those aren't just any model of boot sold by a Pacific Northwest boot company.

Wildland Firefighting is a unique niche. Like logging, and linemen. They have specialty boots, unique to their trade. A lineman climbing a utility pole needs to have lineman boots. Even motor officers wear Pacific Northwest motor officers boots.

I suppose it all depends on who your employer is. Some employers give you a uniform allowance. Some employers issue boots. Some guys just have to pay out of pocket, then try to write it off their taxes as a work related expense.


A firefighter would be better able to explain it. There is a specification from NPFA, for the boots. There are other styles of firefighting boots which are not Pacific Northwest style. There are modern designs. But I suppose it depends on who you work for, and what the culture is at that place of employment.



A lot of police departments still wear those high Wesco motor boots. And they order them from Wesco. It's a part of the culture. It's their tradition. They could wear other boots. They could wear modern riding boots. But they stick to that boot.




AFAIK, the comment your responding to was posted by a professional firefighter…;)
 

Forum statistics

Threads
108,956
Messages
3,071,526
Members
54,012
Latest member
Nikolaus23
Top