Wesco Boot Thread.

[Colin G]

Mine showed up today after waiting over a year and half. Wesco f@*ked things up so the boots will have to go back to Bakers. Probably for a refund. What an utter disappointment. Why did Bakers not even check the boots against the order to make sure they were correct? This could have saved shipping to Canada, me paying tax and import fees and now to pay to send them back. What a shit show.

 

[jglf]

Mine showed up today after waiting over a year and half. Wesco f@*ked things up so the boots will have to go back to Bakers. Probably for a refund. What an utter disappointment. Why did Bakers not even check the boots against the order to make sure they were correct? This could have saved shipping to Canada, me paying tax and import fees and now to pay to send them back. What a shit show.

That sucks. There is no excuse for these companies to not check the boots against the order. What did they mess up on?

 

[Colin G]

Wrong heel strike. I ordered a Quabaug heel since they are not as tall as a Vibram heel strike. I even emailed them frequently to make sure. Baker did their part. Wesco dropped the ball. Stitching is kind of sloppy also.

 

[Jasonissm]

Apparently, Wesco has seen some recent controversy.

I don't have any Wesco boots. I don't have a need for such boots. I have settled to admire from afar.

I remember seeing the original Rose Anvil video, I didn't realise Chris did a response video so thank you for sharing. Chris was always very helpful when I first got my boots with sizing even though I ordered through Iron Heart's store.

I think Wesco has been failing in the QC department over the past year or two, but I think they have tightened it back up recently. I've seen some really poorly made ones come out, very sloppy stitching, uneven toe caps, etc.

Even my pair I went with a retailer for another extra layer of QC, and they are pretty well made in my opinion although I do have way different expectations between my Japanese or Indonesian boots and PNW boots. I think the only real flaw I can find is the toecap is ever so slightly shorter one one boot. Not enough to be very visually apparent on foot but when you look for it, it's there.

Personally, if I were to order another pair of Wesco, I would go through a retailer, extra layer of QC checking and also they seem like their RTW runs are always constructed more neatly compared to MTO.

Note: this picture, they are not lined up symmetrically and I took the photo at a bit of an angle, but it is a small difference that the left one is a few millimeters longer.

Wesco just has this sort of feeling, that I like the overall package a lot, even though they are not as well finished as my other boots. It's kind of hard to explain.

 

[Fifty150]

That's part of the charm when each shoe is made by hand. Or at least that is the line that the salesman at Allen Edmonds expected me to believe when I got effed up shoes. No thank you. I will settle for the less charming shoe without the mistakes.

For decades, I've wanted a made to order Pacific NorthWest boot. I've even mapped the drive from Chinatown to their factory. I have had my sights set on their motorcycle boots, and had every intention of getting fitted at the factory to ensure a proper fit. I just haven't been able to justify the expense to myself. Every time I look at $799 boots, I think of how that money could be better allocated.

 

[Jasonissm]

That's part of the charm when each shoe is made by hand. Or at least that is the line that the salesman at Allen Edmonds expected me to believe when I got effed up shoes. No thank you. I will settle for the less charming shoe without the mistakes.

For decades, I've wanted a made to order Pacific NorthWest boot. I've even mapped the drive from Chinatown to their factory. I have had my sights set on their motorcycle boots, and had every intention of getting fitted at the factory to ensure a proper fit. I just haven't been able to justify the expense to myself. Every time I look at $799 boots, I think of how that money could be better allocated.

If you don't want mistakes, but off the shelf and inspect before buying. I looked at some White's Boots in Stumptown Shibuya, made extremely well and none of the typical QC issues (also you need to fit one of their standard sizes). You will pay a premium though compared to ordering via Baker's during their common 20% sales. For me, if you want perfection, don't get PNW boots, the rough nature comes with the territory. Although you may argue now they're very widely worn for style casually, they are still mostly built in the same way so it's more function first. If you want precision, Japanese bootmakers like White Kloud, Chinese bootmakers like Iron Boots, Flame Panda or Indonesian bootmakers like Onderhoud. All of them will still have minor mistakes, it's pretty much impossible to get a completely perfect boot, it's the degree of imperfections that are acceptable that changes the cost. Not even considering the style of boot is pretty different as well.

For PNW boots, I don't care too much about the precision since I have other boots for that, they will get kicked about and blend in after a while anyways, although I still wear them casually for style, not any work. I have many boots, more beautifully built, more hand finishing techniques, more precisely stitched, but yet I still wear my Wesco the most, I think that means something. I think it has the same sort of appeal as Vanson or Schott vs. precisely made Japanese repros, I like both and they each have their own merits.

If you want even less mistakes than PNW, Jack White Brothers, its maybe 90% of the perfection of White Kloud at about 1/3 of the price. Best boot I have and to me even more charming than my Wesco because I know exactly two people worked on this boot, one of them being one of the best bootmakers in the world.

 

[Bfd70]

2 year wait only to have to return them! No thanks.

 

[Gone]

Mine showed up, wrong colored stitching and sundry QC fails, I'm not going to return them as after waiting all this time I simply want nothing to do with Wesco ever again. Better to just take the loss and wash my hands of them rather than throw away more time and effort. I have no doubt this was a good brand once upon a time, but not anymore.

 

[mlwdp]

Yet no pictures of what Wesco messed up on in QC.

 

[mlwdp]

 

[doug5551]

wesco mister lou engineer natural CXL 9.5E

These are my first pair of Engineer Boots. For me, they fit true to size and fit me perfectly.

There seem to be some concerns about Wesco Quality Control. I am new to fine footwear and my eye and understanding are not trained.

However, i can say that i absolutely love these.

Incredibly overbuilt. Like a pair of Cowboy boots on steroids.

Any yet amazingly comfortable. I have been wearing them around the house like slippers, which is quite an unbelievable accomplishment for something so tough, durable and heavy duty.

 

[jglf]

Just received my Hendrik’s the other day after a 20 month wait. Quality is about on par with my other Wesco’s. Nothing totally egregious but stitching and symmetry could be better. Only mistake they made was to add toe caps when asked not to. There’s no way I’m having them remade and waiting another 1+ year to receive them back.

The Hendrik is by far my favorite boot when it comes to balancing aesthetic, fit, price, and quality. That is why I own 3 and am will to wait so long for them.

 

[setyoustraight]

Wesco Engineer collection

I’m addicted.…

Left to Right:

-Mister Lou Black CXL HH
-Mister Lou Natural CXL
-Iron Heart Germany Custom Boss Black CXL Cowhide
-Boss 7500

(Not pictured)
-Stock Boss Black (getting resoled)
-Mister Lou Brown CXL (Shipping soon via Wesco)

I’ll post my Wesco lace-ups another time.

 

[doug5551]

Wesco Engineer collection

I’m addicted.…

Left to Right:

-Mister Lou Black CXL HH
-Mister Lou Natural CXL
-Iron Heart Germany Custom Boss Black CXL Cowhide
-Boss 7500

(Not pictured)
-Stock Boss Black (getting resoled)
-Mister Lou Brown CXL (Shipping soon via Wesco)

I’ll post my Wesco lace-ups another time.

Great pics!!

My Natural CXLs are posted above.

I'm doing everything I can to stay one and done with Engineer Boots.

I have 13 pair of Cowboy boots, though.

But I LOVE my Wescos. I call them Cowboy boots on steroids.

So strong, so heavy duty, but also so comfortable.

Thanks for your post and pics!!!!

 

[cbez]

Forgot we had this. If the date code is week / year they are 22nd week of 2000.

 

[Leatherbirdsoul]

Yay, Fall is here finally!

 

[Goel]

I recently got my new Wescos in, am I crazy for thinking they might have used the wrong leather on my order? I supplied them with some Montana bison which has a very smooth texture for bison, but the leather on the boot they sent me looks like the Shrunken Bison they stock.






For reference, here is how the Montana Bison looks on a jacket...

 

[AeroFan_07]

^^ Call them up and ask.

But those boots look very sharp to me! I like the highly visible texture/grain on that leather.

 

[Goel]

I did my order through Baker's and I've already emailed them, but one way or another they'll have to move on since they're too big. My heels barely even touch the back, so I would probably need to go down a size.

 

[Woodtroll]

I did my order through Baker's and I've already emailed them, but one way or another they'll have to move on since they're too big. My heels barely even touch the back, so I would probably need to go down a size.

That's a shame, for sure. How long was your wait for this pair?