-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Show us your Guns!
- Thread starter Undertow
- Start date
Anybody ever heard of a EAA Windicator revolver. You almost never see the snub-nosed version in 357 mostly in 38. This gun is made in Germany by the same people who make Beeman air rifles. At 279$ price tag new, I think this gun is one of the best kept secrets in firearms.
Oldsarge
One Too Many
- Messages
- 1,440
- Location
- On the banks of the Wilamette
Really? That could be my first choice in a carry gun at a price like that. I wonder who in the area carries them.
They're actually really hard to find unless you happen to come across one usually used. The retail chain stores that carry them are always sold out and never have the 357. I got mine in a trade kinda by accident and when I went to research it i was surprised to find out they had a little cult following. There really well made for the price point and accurate I've put over 500 rds threw mine. They say don't feed it a steady diet of Magnum loads I load 357 with a 38 charge. The machine work is really surprisingly good, has a few sharp edges but what do you expect for 279$
Oldsarge
One Too Many
- Messages
- 1,440
- Location
- On the banks of the Wilamette
I found one on GunBroker. It was a bit more than $279 but not much. Thanx for pointing this one out.
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
I have heard of them, but have never got to handle one. They look like a very solid revolver. And I am very partial to 6 shot snub nose revolvers. Is that a k-frame speed loader that you have with it?
Kirk
It's a generic picture I pulled off the internet just to showcase the gun. Mines a little older and the picture of that one was prettier. But I have a box of speed loaders , not sure what styles they all are I have several. This is my home defense weapon. Cause if someone broke in and stole it I wouldn't cry 2 much. Hears my rig I have hanging in the bedroom
Last edited:
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
As you can see the blueing is a little duller on mine she's got a few miles on her but she locks up tight as a dolphin's asshole and shoots straight. I've only seen 1 ever for sale in a shop and it was a 38. Like I said it's no Colt or S&W or Ruger. But in the Taurus , Rossi, ect class price point. You get a German engineered and craftsmanship revolver with some nice lines and style.
Last edited:
Oldsarge
One Too Many
- Messages
- 1,440
- Location
- On the banks of the Wilamette
Just got a 'proper' case for my '09 Jeffery SLE. Got a hammer gun coming, too.
Wow Sarge. I'm green with envy. How about some closer pictures of the rifle.View attachment 54262
Just got a 'proper' case for my '09 Jeffery SLE. Got a hammer gun coming, too.
Well guys, the update to a Korean War/Vietnam War timeframe M1 has now been fully done for some times. Here are the changes made:
- Repro para stock
- Original adjustable sights instead of the original flip up
- Security lever changed from type 1 (push button type) to type 2 (rotary lever)
- Magazine lock changed from an M1 to an M2 to accept 30rds magazines without any missfeed
Of course, all of these are easily changed back to the original configuration!
Sorry for the bad quality of the pictures!
And with it's eternal sidekick, Norinco 1911A1 with a couple Wilson parts:
Looks good AND familiar.Well guys, the update to a Korean War/Vietnam War timeframe M1 has now been fully done for some times. Here are the changes made:
- Repro para stock
- Original adjustable sights instead of the original flip up
- Security lever changed from type 1 (push button type) to type 2 (rotary lever)
- Magazine lock changed from an M1 to an M2 to accept 30rds magazines without any missfeed
Of course, all of these are easily changed back to the original configuration!
Sorry for the bad quality of the pictures!
And with it's eternal sidekick, Norinco 1911A1 with a couple Wilson parts:
Indeed, pretty classic one, not so much here in Belgium, though. I must say, I think I found THE carbine I needed. Have never had so much fun shooting anything else, and precision is pretty good too.
Funny thing, most people prefer the regular stock over the paratrooper one, but with my big hands, I have a much better grip on the big fat para pistol grip.
Funny thing, most people prefer the regular stock over the paratrooper one, but with my big hands, I have a much better grip on the big fat para pistol grip.
Oldsarge
One Too Many
- Messages
- 1,440
- Location
- On the banks of the Wilamette
Actually, it's a 2.5" chambered 12 ga. I fear I will never be able to afford a double rifle (sob, whimper, bawl . . .) but I do indulge myself on occasion with vintage shotguns.
Alright boys I started her tonight. I've been sitting on this for 9 months. I have 2 from big 5. One is a M48 B and this one is a M48 BO looks like it was unissued
But she is filthy and was starting to rust in a few areas has been sitting in arsenal since 1956. The BO's are the rarest of the Yugoslavian Mauser variations. Actually the original m48s are but the A's and B's and BO's we're what was shipped into America along with the 24/47s. They were produced for clandestine sales to mostly Egyptian, Iraq and the Algeria liberation movements.
But she is filthy and was starting to rust in a few areas has been sitting in arsenal since 1956. The BO's are the rarest of the Yugoslavian Mauser variations. Actually the original m48s are but the A's and B's and BO's we're what was shipped into America along with the 24/47s. They were produced for clandestine sales to mostly Egyptian, Iraq and the Algeria liberation movements.
Last edited:
