DeaconKC
One Too Many
- Messages
- 1,740
- Location
- Heber Springs, AR
WOOHOO! Looks great!
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Show us your Guns!
- Thread starter Undertow
- Start date
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
Here are a couple of quick shots of my 1927a1, I'll post some better photos when I get a chance to set up for the photo shoot.
I'll post a full range report when I get a chance to get to the range.
Vernon
That looks great. Let us know how it shoots. Enjoy.
Kirk H.
That doesn't look like a violin case to me!Here are a couple of quick shots of my 1927a1, I'll post some better photos when I get a chance to set up for the photo shoot.
I'll post a full range report when I get a chance to get to the range.
Vernon
DeaconKC
One Too Many
- Messages
- 1,740
- Location
- Heber Springs, AR
Took this earlier today for another project:
vedearduff
New in Town
- Messages
- 24
- Location
- Central Indiana
No, it's not a violin case. I know where I can get one once I've converted into an SBR though.
I found a web site that has the results of a FOIA request. The PDF contains documentation for the FBI SMG case. This is the hard case the FBI used for many of their Thompsons. The PDF includes the request for bid (along with drawings, dimensions, and a materials list) and the approval letter (signed by J Edgar himself) for funding of the winning bid.
I plan on building a copy of this case. I may end up building two cases, one for the rifle as it is now and one for the SBR after the conversion (after the approval comes back).
Cheers.
I found a web site that has the results of a FOIA request. The PDF contains documentation for the FBI SMG case. This is the hard case the FBI used for many of their Thompsons. The PDF includes the request for bid (along with drawings, dimensions, and a materials list) and the approval letter (signed by J Edgar himself) for funding of the winning bid.
I plan on building a copy of this case. I may end up building two cases, one for the rifle as it is now and one for the SBR after the conversion (after the approval comes back).
Cheers.
I relly like thos FBI cases!
KilroyCD
One Too Many
- Messages
- 1,966
- Location
- Lancaster County, PA
Nice looking collection there, Deacon. Is the Broomhandle 7.63mm or 9mm?Took this earlier today for another project:
DeaconKC
One Too Many
- Messages
- 1,740
- Location
- Heber Springs, AR
It's a 7.63 unfortunately, so i can't use it Zoot Shooting. Parts gun that actually shoots decently, the new Prvi ammo is pretty good stuff. There's also a 3rd Model HE in .44 Special and a 4" M&P that might see some use.
Last edited:
Renault
One Too Many
- Messages
- 1,688
- Location
- Wilbarger creek bottom
Deacon! Love that 3rd Model Hand Ejector!!!!!! I just stuck an old Tyler-T on my new Model 22 Nickel!
Renault
Renault
DeaconKC
One Too Many
- Messages
- 1,740
- Location
- Heber Springs, AR
Thanks Renault. I'm on the lookout for a T grip for the 1917, got any extras?
vedearduff
New in Town
- Messages
- 24
- Location
- Central Indiana
I finally had a chance to get to the range today. I only had time to put 100 rounds through the Thompson, but it functioned flawlessly. Not one jam or failure of any type.
The only problem, if you can call it a problem, is that it shoots about 10 inches low at 25 yards (folding sight down). At 100 yards, I was able to regularly pick off pieces of clay birds that had been left on the backstop.
I only used the stick mag, I didn't take the time to load the drum.
I hope to get to the range again this weekend and should have more time then.
Vernon
The only problem, if you can call it a problem, is that it shoots about 10 inches low at 25 yards (folding sight down). At 100 yards, I was able to regularly pick off pieces of clay birds that had been left on the backstop.
I only used the stick mag, I didn't take the time to load the drum.
I hope to get to the range again this weekend and should have more time then.
Vernon
Renault
One Too Many
- Messages
- 1,688
- Location
- Wilbarger creek bottom
Wish I did, got a 1917 myself! I mentioned I was looking for an older N frame Tgrip to one of the regular gun wholesalers that come in the shop. Two weeks later he laid a NOS Tyler-T on my bench and said "You owe me ten bucks....." Heck yeah! I about ripped the pocker off my trousers gettin' to my wallet!
R
DeaconKC
One Too Many
- Messages
- 1,740
- Location
- Heber Springs, AR
I hear that! I would have too!
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
Me too. I love the Tyler T-grips.
Oldsarge
One Too Many
- Messages
- 1,440
- Location
- On the banks of the Wilamette
I can easily see filing T-grips away just waiting for the right wheelgun to show up. Ten bucks? Sheesh . . .
DeaconKC
One Too Many
- Messages
- 1,740
- Location
- Heber Springs, AR
"But Honey, I had to buy this Triple Lock.....I've got a Tyler to fit it!"
Renault
One Too Many
- Messages
- 1,688
- Location
- Wilbarger creek bottom
Hey! I've used that excuse for an empty holster!!!!!
Featured products
-
John Lofgren Monkey Boots Shinki Horsebuttt - $1,136 The classic monkey boot silhouette in an incredibly rich Shinki russet horse leather. -
Grant Stone Diesel Boot Dark Olive Chromexcel - $395 Goodyear welted, Horween Chromexcel, classic good looks. -
Schott 568 Vandals Jacket - $1,250 The classic Perfecto motorcycle jacket, in a very special limited-edition Schott double rider style.
MikePotts
Practically Family
- Messages
- 837
- Location
- Tivy, Texas.
............me too, I once found a very elderly Safariland slip on/paddle/ metal springy thing holster for a 2 1/2" Python....took me a year or two but I eventually filled it!
MP
Renault
One Too Many
- Messages
- 1,688
- Location
- Wilbarger creek bottom
Well there you go!!!! See! It works!!!!! 
Take note youngens!!!!!!!
R
Take note youngens!!!!!!! R
Insp. Bumstead
New in Town
- Messages
- 44
- Location
- Chicago
Hello all
I really admire the themed collections in this thread. It's nice to have a place to talk about guns without seeing black plastic everywhere. I personally am not much of a collector; whether it's hats or guns or any other hobby I don't like having a lot of *stuff* laying around so I go for high versatility items. That's why I own a S&W Model 19-2:
Shooting close or far, big or small, the .357 magnum can do everything. And the M19 is light enough to carry, heavy enough to soak up the recoil. It sits low in the hand and points like my finger. I think it's almost the perfect handgun.
The other one I own is modern production, but vintage-style I guess, a CZ 452 .22 rifle. The little white dot in the middle is the 100-yard gong:
It's pretty fun to press the trigger, work the bolt, and hear the PING! after a significant delay.
I really admire the themed collections in this thread. It's nice to have a place to talk about guns without seeing black plastic everywhere. I personally am not much of a collector; whether it's hats or guns or any other hobby I don't like having a lot of *stuff* laying around so I go for high versatility items. That's why I own a S&W Model 19-2:
Shooting close or far, big or small, the .357 magnum can do everything. And the M19 is light enough to carry, heavy enough to soak up the recoil. It sits low in the hand and points like my finger. I think it's almost the perfect handgun.
The other one I own is modern production, but vintage-style I guess, a CZ 452 .22 rifle. The little white dot in the middle is the 100-yard gong:
It's pretty fun to press the trigger, work the bolt, and hear the PING! after a significant delay.
Last edited:
