Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Photos of hatters tools

Xylophile

One of the Regulars
Messages
132
Location
Shenandoah Valley of Virginia
Point taken; however, as I am making these out of "scrap" boards, that's how these will be. I have enough for two more polar's for practice, then a piece of hickory for when I get serious.


Sent directly from my mind to yours.
Cool, then my further advice would be to see if you can get as much "late wood" on the working surface as you can.
https://en.wikipedia.org/wiki/Wood#In_ring-porous_woods
That way I expect it will glide over that felt without a snag or a mark.
And I hope you'll pardon my continued advice here, as I imagine it won't make 5% difference in your work, however I just enjoy having an outlet for my formerly used knowledge of wood. What's great about this place (or not) is you get everyone's $0.02 for free!
 
Messages
19,424
Location
Funkytown, USA
Cool, then my further advice would be to see if you can get as much "late wood" on the working surface as you can.
https://en.wikipedia.org/wiki/Wood#In_ring-porous_woods
That way I expect it will glide over that felt without a snag or a mark.
And I hope you'll pardon my continued advice here, as I imagine it won't make 5% difference in your work, however I just enjoy having an outlet for my formerly used knowledge of wood. What's great about this place (or not) is you get everyone's $0.02 for free!

And worth every penny! LOL. Seriously, thanks for the advice. I would have never considered that without your input. I'll likely not make many of these, however. It's not going to be a business, I'm making them for my own personal use, so these will likely be the only ones I ever make.
 

humanshoes

One Too Many
Messages
1,446
Location
Tennessee
And worth every penny! LOL. Seriously, thanks for the advice. I would have never considered that without your input. I'll likely not make many of these, however. It's not going to be a business, I'm making them for my own personal use, so these will likely be the only ones I ever make.
Hah! That's exactly what I thought when I made my first rounding jack. Just a one-off for my personal use. Now I've built dozens and sent them all over the planet.
 

buler

I'll Lock Up
Messages
4,380
Location
Wisconsin
Found these narrow flanges this weekend. They are marked as 1 1/4 7 5/8 561R, 1 1/4 7 1/4 181, 1 1/2 7 1/4 728. All are about 2 1/4 inches deep.

B

narrow_flanges (492x1024).jpg
narrow_flanges_side (775x1024).jpg
 

ChicagoWayVito

Practically Family
Messages
699
So I finally picked up a flange stand on eBay for a decent price (thank you miscategorized items!). It also came with this:

35c0a1b2b1ee520210e1850e01758e06.jpg
1ab26f527cbc24603f69c4f63d99c41c.jpg
67fa8413685eb31b4f4bac0249881827.jpg


So my question is...



What the hell is that thing?


Sent directly from my mind to yours.

I suspect that one you have a flange on the stand, you use that piece and insert it into the hat and then put the hat inside the flange crown down. Then cover with a cotton cloth, steam, and then sand bag it for 15 minutes and remove. Now you have flanged your brim. I have used Hat Jacks to do the same job. Are there any markings on it? Maybe it indicates a size? Or they were confused about it too and it has nothing to do with hatting. :)
 
  • Like
Reactions: RJR
Messages
18,443
Location
Nederland
Now that makes me want to have a go at it myself (and do a terrible job). Lovely shot. It's like these DIY guys on TV making it look so easy if you only have the right tools.
 

navarre

Vendor
Messages
322
Location
Black Sheep Hat Works
I suspect that one you have a flange on the stand, you use that piece and insert it into the hat and then put the hat inside the flange crown down. Then cover with a cotton cloth, steam, and then sand bag it for 15 minutes and remove. Now you have flanged your brim. I have used Hat Jacks to do the same job. Are there any markings on it? Maybe it indicates a size? Or they were confused about it too and it has nothing to do with hatting. :)


Good guess Chicago, but it is more likely the matching counterpart to a crown mold, like a tipper. It might not be for a mens hat at all. These are often seen with millinery blocks. Picture a Telescope type crown, the felt is steamed, blocked and roped down. This piece then fits into the top to help retain the sharp crease while the felt sets up. The board is in essence the handle, some times these are used with a press as well. The press being used to hold the tipper in place while the hatter wanders off to do other tasks.
 
Messages
19,424
Location
Funkytown, USA
Good guess Chicago, but it is more likely the matching counterpart to a crown mold, like a tipper. It might not be for a mens hat at all. These are often seen with millinery blocks. Picture a Telescope type crown, the felt is steamed, blocked and roped down. This piece then fits into the top to help retain the sharp crease while the felt sets up. The board is in essence the handle, some times these are used with a press as well. The press being used to hold the tipper in place while the hatter wanders off to do other tasks.

That makes sense. There is a mark on it to signify the "front."


Sent directly from my mind to yours.
 

Kuki

One of the Regulars
Messages
277
Location
Barcelona
I am staying with my 92 year old grandmother at the moment. When she was young, she trained to be a dressmaker, and after that took evening classes in millinery for 4 years until she qualified (second best of her class). She then got married and became a housewife, making clothes and hats for the whole family, but never working professionally as a milliner. She still made clothes for me when I was a kid, but had unfortunately given up making hats. This is her old hat block, dating from around 1950/early 50s. It's the only one she owned as they were very expensive, and any other blocks she needed could be rented quite cheaply at the time. She said she wants me to have it when she passes away, but of course that's not something I want to happen in the near future...

View attachment 63750

What a great story!! Thank your for sharing!! No hurry to get that block!


Sent from my iPhone using Tapatalk
 

humanshoes

One Too Many
Messages
1,446
Location
Tennessee
IMG_0096 (320x240).jpg
IMG_0098 (320x240).jpg
IMG_0103 (320x240) (320x240).jpg


Okay, here's the Frankenstein hat spinner built from scrounged objects. My buddy had a damaged variable speed portable band saw that still had a good motor and pulley. Mounted that to an aluminum plate and mounted that to an old end table. Speed control knob gives me a range of about 100 to 350 rpm.
 

Attachments

  • IMG_0095 (320x240).jpg
    IMG_0095 (320x240).jpg
    74.5 KB · Views: 159
Last edited:

Forum statistics

Threads
109,243
Messages
3,077,083
Members
54,183
Latest member
UrbanGraveDave
Top