- Messages
- 15,089
- Location
- Buffalo, NY
aha... thank you.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Open Crown Stetsons: A Call (Plea) to Retailers!!
- Thread starter theinterchange
- Start date
aha... thank you.
tommyK
One Too Many
- Messages
- 1,789
- Location
- Berwick, PA
really digging the Knox Special Edition Mr. Deckard is taunting us with. Hope it goes into production.
fedoracentric
Banned
- Messages
- 1,362
- Location
- Streamwood, IL
(I was saying "huh?", too!)
- Messages
- 15,280
- Location
- Somewhere south of crazy
Whats'a matter, Don't ya'll speak Kentuckian?
Jedwbpm
One Too Many
- Messages
- 1,031
- Location
- West Coast Florida
Fisrt and formost welcome to the lounge. I hope you enjoy your time here. There is a lot of knowledge here and very little flaming. Secondly thank you for your order. It takes about 4 to 6 weeks for Stetson to make hats for us after we order them. That being said we do not know their production schedule. It could be longer or shorter.
Jeff
Jeff
frussell
One Too Many
- Messages
- 1,409
- Location
- California Desert
Jeff - what about having them make one of the new models in a 7 7/8 for us big boys? Doable or not? Thanks, Frank
Jedwbpm
One Too Many
- Messages
- 1,031
- Location
- West Coast Florida
Bold1972
New in Town
- Messages
- 16
- Location
- Phoenix, AZ
Thank you - I am happy to post up pictures when the new Strat arrives - I always take them anyway
Bold1972
New in Town
- Messages
- 16
- Location
- Phoenix, AZ
Sounds good - if the quality is as good as everyone here has stated, it will be well worth the wait.
The Wiser Hatter
I'll Lock Up
- Messages
- 4,765
- Location
- Louisville, Ky
So Alan when are you getting one?
Last edited:
Jedwbpm
One Too Many
- Messages
- 1,031
- Location
- West Coast Florida
Matt just informed me that we can get the Premiere Stratoliner all the way up to size 8
Jeff
Jeff
frussell
One Too Many
- Messages
- 1,409
- Location
- California Desert
Good news Jeff. Just PM'd you regarding how to order if it's not a listed size. Thanks, Frank.
got mine in today in Mink
overall very nice felt, color good feel to the felt & creased EZ
conformed very well to my in between 7 1/8 & 7 1/4 LO (I ordered 7 1/8) sweatband is real nice
Rebecca likes it !
But
im going to be honest there are 2 stitches on the left side of the ribbon that were sloppy tack stitches lacked quality control.
maybe it was the end of shift bum rush or a rookie stitch.
I run my finger over them feels like plastic & firm the stitches
front left
rear left
if I had the chance to buy in person id pass if it was like this
but I ordered it 10-11-13 & Jeff got us that sale special its here today
so if it weren't for the 2 stitches it would be well worth the wait & a good value & I would rate it excellent..
I might return it but might not be worth the hassle & cost....
hope I don't sound picky but maybe mine just slipped past quality control...
it sure does feel good sitting on my head though..
che
overall very nice felt, color good feel to the felt & creased EZ
conformed very well to my in between 7 1/8 & 7 1/4 LO (I ordered 7 1/8) sweatband is real nice
Rebecca likes it !
But
im going to be honest there are 2 stitches on the left side of the ribbon that were sloppy tack stitches lacked quality control.
maybe it was the end of shift bum rush or a rookie stitch.
I run my finger over them feels like plastic & firm the stitches
front left
rear left
if I had the chance to buy in person id pass if it was like this
but I ordered it 10-11-13 & Jeff got us that sale special its here today
so if it weren't for the 2 stitches it would be well worth the wait & a good value & I would rate it excellent..
I might return it but might not be worth the hassle & cost....
hope I don't sound picky but maybe mine just slipped past quality control...
it sure does feel good sitting on my head though..
che
Last edited:
rclark
Call Me a Cab
- Messages
- 2,275
- Location
- Central Texas
Great looking hat, Seabass, but I don't think you are being too picky. That was a sloppy job on the stitching and for the price point these things are commanding I think it totally reasonable to expect better workmanship. But all in all it looks great!
fedoracentric
Banned
- Messages
- 1,362
- Location
- Streamwood, IL
I'll be saving up for the Stetson Strat in Caribou.
Historyteach24
Call Me a Cab
- Messages
- 2,447
- Location
- Huntington, WV
I don't think you are being too picky those tacks look just unprofessional
The Wiser Hatter
I'll Lock Up
- Messages
- 4,765
- Location
- Louisville, Ky
Che, that is an area that has always been a complaint with Stetson's. They just miss the little touches on the hats. Mine look fine thou I wish the wear totally invisable like a vintage or custom hat ribbon tack.
Joshbru3
I'll Lock Up
- Messages
- 4,409
- Location
- Chicago, IL
Well, I wouldn't say that vintage Stetsons had invisable hat ribbon tacks. They were done far better and more towards the bottom of the ribbons edge so they would blend in better. The problem with many of the modern day hat factories is the use of plastic thread which is not only bulky, but doesn't feel right. I suspect they use clear plastic thread to avoid having to buy thousands of thread colors. It appears in this example Hatco did use a regular fabric thread, it was just poorly executed.
Che: If you have a pair of fine tipped sewing scissors, you can cut that stitch and pull that thread out. Because the hat still has the ribbon sewn all the way around and at the bow contacts, it will not go anywhere if you remove the one stitch. Then with a little steam, the bunched up ribbon will look normal again. Just a thought.
carldelo
One Too Many
- Messages
- 1,568
- Location
- Astoria, NYC
^^^ agreed, I would probably pull that stitch out.
Featured products
-
John Lofgren Monkey Boots Shinki Horsebuttt - $1,136 The classic monkey boot silhouette in an incredibly rich Shinki russet horse leather. -
Grant Stone Diesel Boot Dark Olive Chromexcel - $395 Goodyear welted, Horween Chromexcel, classic good looks. -
Schott 568 Vandals Jacket - $1,250 The classic Perfecto motorcycle jacket, in a very special limited-edition Schott double rider style.
VetPsychWars
A-List Customer
- Messages
- 410
- Location
- Greenfield Wisconsin
The first of mine came in. As was stated, the Premiere Stratoliner is not available in Tawny... darnit. What I received instead was Mink. Like I need another brown hat! But, we can dress it up with a blue jacket, heh.
The original:
My new Mink:
As I usually do, creased in a teardrop shape, pinched a little more than half-way back, with some decent rake. It's about 4-1/2" in the front and 3-3/4" in the very back. I raise a dome in the middle to clear my head.
I use steam to set the crease; this hat is soft out of the box, but where you hit it with the steam will determine where it gets stiff and holds its shape. While initially I was, "huh?" it actually makes sense. For the next one, the Cornhill, I'm going to steam the front lightly where the pinch is to get more of a snap into it.
If you haven't gotten any yet and you like the colors offered so far... it's worth the $225.
One last pic...
Hope you liked my little review.
Tom
The original:
My new Mink:
As I usually do, creased in a teardrop shape, pinched a little more than half-way back, with some decent rake. It's about 4-1/2" in the front and 3-3/4" in the very back. I raise a dome in the middle to clear my head.
I use steam to set the crease; this hat is soft out of the box, but where you hit it with the steam will determine where it gets stiff and holds its shape. While initially I was, "huh?" it actually makes sense. For the next one, the Cornhill, I'm going to steam the front lightly where the pinch is to get more of a snap into it.
If you haven't gotten any yet and you like the colors offered so far... it's worth the $225.
One last pic...
Hope you liked my little review.
Tom
