Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

New Cafe' Racer Style - Stumptown Racer By Headwind Mfg Co- Sz. 40-42

Skyhawk

Vendor
Messages
359
Location
Portland, OR
CR-Front-2-40.jpg

Specs:
Size 40-42
Hide: Full aniline Steerhide (Seal)
Liner: Red 100% Soft Cotton
Zippers: 1940's Talon Main zip. Matching Unmarked Zips on chest and sleeves
Pockets: 1 chest, 1 inside, 2 Slash Style in front

Measurements:
Chest: 22"
Shoul: 18.5"
Arms : 26"
Back : 25.5"

Price: $325 + Free US Shipping or +$60 for international
CR-Back-50.jpg

Details:
This is a test jacket for our new Cafe Racer, the Stumptown Racer. The jacket has very nice full aniline Steer hide. Soft and thick. Grainy. Truly outstanding hide. There are a few crease lines on the back and minor ones on the front. These will loosen and blend in with wear. The zipper is a high quality Talon USA reproduction, not a counterfeit one found on a lot of bargain jackets these days. There was an error in production and the zipper was flipped when resizing it, so it is right insert (Euro Style). Not a big deal when you get used to it. This will be corrected moving forward on the production jackets.
P1050184-050.jpg

P1050185-50.jpg

P1050227-50.jpg


Best Regards,
Jay
 

Skyhawk

Vendor
Messages
359
Location
Portland, OR
The hide is 1.4 - 1.5 mm Thickness. It is deep drum dyed with the back being just as dark as the front side.

Total Jacket weight is 3 Lbs 8 1/2 oz
 

Skyhawk

Vendor
Messages
359
Location
Portland, OR
Beautiful, elegant CR! Love that...well done!
Thanks! I am excited about this new jacket model. This Full Aniline Steer is a beautiful hide. We also have this hide in black, as well as a very nice Semi-Aniline Russet. This model will be available on the website for purchase very soon in sizes 36-48.
 

Skyhawk

Vendor
Messages
359
Location
Portland, OR
Back up for sale. Returned due to it not fitting the guy who purchased it.

Price $300 with free shipping in the USA. At cost shipping elsewhere.
 

Fonzie

One Too Many
Messages
1,574
Location
Australia
Bump
Now $225 - Free shipping in the USA!
Hi, is that chest pocket zipper like that or is it broken? (looks like a ball chain loop one, can’t see it well on the pic, honest question).

Also, would you ship international and how much? (Australia)
 

Carlos840

I'll Lock Up
Messages
4,944
Location
London
Just a quick technical question if you don't mind.
I have noticed that all three jackets you have posted in the classifieds have this characteristic tightening of the stitch on either side of the main zipper. It is something i often see on some other makers jackets usually just before jumping a thick folded seam. It makes me think of the quick stepping long jumpers do just before taking their final impulsion.
What is the technical reason for this change in stitch spacing? Is it a setting in the machine? Is it a user thing where you just slow down before a more technical bit and the stitching tightens?
Why is it hapening at that specific area for it to be visible in all three jackets?

j0iV8t7.jpg
 

Skyhawk

Vendor
Messages
359
Location
Portland, OR
Just a quick technical question if you don't mind.
I have noticed that all three jackets you have posted in the classifieds have this characteristic tightening of the stitch on either side of the main zipper. It is something i often see on some other makers jackets usually just before jumping a thick folded seam. It makes me think of the quick stepping long jumpers do just before taking their final impulsion.
What is the technical reason for this change in stitch spacing? Is it a setting in the machine? Is it a user thing where you just slow down before a more technical bit and the stitching tightens?
Why is it hapening at that specific area for it to be visible in all three jackets?

j0iV8t7.jpg
Not sure but I only see it on this one jacket. I can ask my guys in production. I don't see a problem with the strength of the stitching and you can have little variances in stitch spacing depending on the changing thickness of the leather. This is a small thing that I think can easily be corrected in the future. On a test jacket I am selling for less than 1/2 price, I think it is not a big deal at all.
 
Last edited:

Skyhawk

Vendor
Messages
359
Location
Portland, OR
Hi, is that chest pocket zipper like that or is it broken? (looks like a ball chain loop one, can’t see it well on the pic, honest question).

Also, would you ship international and how much? (Australia)

The zip chain is not broken. That is a Clix lanyard type chain that we used on a few of our test jackets. We now are using the Talon marked chains. You can get aftermarket ones on ebay that crimp on. A possibility if you don't like the type that is on there.

Yes I will send this internationally. I will PM you the cost to Aus.

-Jay
 

Carlos840

I'll Lock Up
Messages
4,944
Location
London
Not sure but I only see it on this one jacket. I can ask my guys in production. I don't see a problem with the strength of the stitching and you can have little variances in stitch spacing depending on the changing thickness of the leather. This is a small thing that I think can easily be corrected in the future. On a test jacket I am selling for less than 1/2 price, I think it is not a big deal at all.

I was in now way complaining about the quality or the price of the jacket, it's just something i have noticed on many jackets done by many different people and i was wondering if you knew the reason why it happened.
It's curriosity on my part, not trying to crap on your work, sorry if it sounded that way.

iYDk2FS.jpg

aEspMRv.jpg
 

Forum statistics

Threads
109,257
Messages
3,077,456
Members
54,183
Latest member
UrbanGraveDave
Top