Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

My first Aero -- is it a keeper?

Gamma68

One Too Many
Messages
1,936
Location
Detroit, MI
I've fallen head first down the rabbit hole.

1.JPG
2.JPG 3.JPG
Purchased a used Aero "motorcycle jacket" online. Tagged size 38. Don't know when it was made. I believe it is CXL? I'm not an expert on FQHH, but my first impression is the hand is somewhat similar to the Schott naked cowhide I flipped a while back.

More photos:

4.JPG 6.JPG
5.JPG
I notice at areas where there has been wear to the leather (for example at the cuff zips, collar fold) a dark brown is showing through the black (similar to the raw underside of the epaulettes).
7.JPG 8.JPG
10.JPG
 

Attachments

  • 1.JPG
    1.JPG
    437.6 KB · Views: 238

kronos77

One of the Regulars
Messages
257
Location
Pennsylvania
The current Horween CXL that Aero uses is nothing like the Schott naked cowhide. If you are correct about the similarity then it must be an older model. Perhaps it could be the old oil pull that Aero discontinued.
 

El Marro

My Mail is Forwarded Here
Messages
3,598
Location
California
Looks like a very nice jacket Gamma, worn but not worn out. How's the fit? If it fits you well then I'd say this one is a keeper for sure!
 

Gamma68

One Too Many
Messages
1,936
Location
Detroit, MI
Now for the negatives. There are some small areas of wear at the inside lining at the back hem. Not sure how much of a concern this should be.

11.JPG 12.JPG

The biggest issue is the main Talon zipper is missing some teeth at the beginning. My understanding is this is a common problem for these heavy Aero FQHH jackets. The jacket can't be zipped.

13.JPG

Here are fit pics, with jacket unzipped and then held as close as I can manage to how it might look fully zipped. My concern is mostly with the waist, which seems like it would be TIGHT when zipped. The shoulders also seem squared off and the jacket seems short, but I believe this is attributable to the Aero design.

14.JPG 15.JPG 16.JPG 17.JPG
 

Gamma68

One Too Many
Messages
1,936
Location
Detroit, MI
These are the jacket measurements for reference. It is tagged size 38.

Shoulders: 18”
Chest: 22.5”
Waist: 18.5" just below the belt
Sleeve: 24” (24.5” following curve)
Length from BOC: 24”

My measurements above differ slightly from the seller's. It's about .5" larger at the shoulders and chest than listed.
 
Last edited:

AbbaDatDeHat

I'll Lock Up
Messages
8,850
These are the jacket measurements for reference. It is tagged size 38.

Shoulders: 18”
Chest: 22.5”
Waist: 18.5" just below the belt
Sleeve: 24” (24.5” following curve)
Length from BOC: 24”

My measurements above differ slightly from the seller's. It's a about .5" larger at the shoulders and chest than listed.
Hey Gamma:
Cool jacket. What’s your height and weight just for perspective?
B
 

TREEMAN

Call Me a Cab
Messages
2,568
Location
USA
Nice jacket Gamma...It's not a good fit on you..Too much material in the back, along with the broken zip...it probably should be returned....:(
 

seres

A-List Customer
Messages
457
Location
Alaska
That broken zip and torn lining are going to be big repairs, so I would send it back for those alone. And it is slightly too big in the chest area.
 

Hh121

Banned
Messages
3,004
It costs around $100 to change the zipper, plus the huge back, I would send it back.
 

BlueWallpaper

Familiar Face
Messages
93
Location
New York
Take my opinion with a healthy dose of salt, because I don't like this style of jacket, but I'd say return or pass it on. I wouldn't care about the zipper because really you don't zip jackets up that much (unless you're caught out in bitter enough conditions that you wish you were wearing a different jacket!). The issue is that it doesn't fit you. I feel half the fun or reason of owning a leather jacket is to get it to that perfect worn in look. You're close here but it's not good enough, dive deeper into the rabbit hole!!!
 

Guppy

I'll Lock Up
Messages
4,338
Location
Cleveland, OH
Now for the negatives. There are some small areas of wear at the inside lining at the back hem. Not sure how much of a concern this should be.

View attachment 118583 View attachment 118584

The biggest issue is the main Talon zipper is missing some teeth at the beginning. My understanding is this is a common problem for these heavy Aero FQHH jackets. The jacket can't be zipped.

View attachment 118585

Here are fit pics, with jacket unzipped and then held as close as I can manage to how it might look fully zipped. My concern is mostly with the waist, which seems like it would be TIGHT when zipped. The shoulders also seem squared off and the jacket seems short, but I believe this is attributable to the Aero design.

View attachment 118586 View attachment 118587 View attachment 118588 View attachment 118589

The wear to the lining isn't a big deal, to me. That's just what happens after a while.

The main zipper needing to be replaced is a big deal. Unless you bought it for <$400, I think you could have done better. Replacing the zipper will cost around $100 or so to do it right. You could substitute a heavy duty YKK zipper, and save a few dollars, but most of the cost will be in the labor, and you'll want someone who is experienced working with heavy leather. If there's no one local, factor in shipping onto the cost.

It's supposed to fit tight at the waist, being a motorcycle jacket. I would assess whether you'd be able to zip it up before getting the zipper repaired, and if it's not something you can wear zipped, move it on. If it does fit (and it looks like it does from your pictures to me) then it'd be a good jacket to keep once the zipper is repaired. Whether you got a good deal or not, that's up to you to decide.
 

Seb Lucas

I'll Lock Up
Messages
7,562
Location
Australia
What do you think about it? That's really what matters. I'm not drawn generally drawn to this style of leather jacket and I always feel they only suit about 50% of the guys who post pictures in them. The photos probably don't assist me too much as they are a little stiff or awkward. The photo from the front of it unzipped looks ok. But overall to my eye the jacket looks looks a little oversized.
 

tweedydon

My Mail is Forwarded Here
Messages
3,054
Location
Pennington
I love these jackets! The zipper is a major repair, as others have noted; I would budget around $145 for repair. (My estimate is based on replacement zippers I've had repaired by Dena at Great Leathercraft; this includes shipping back and forth.) The lining I would have patched; this is fairly inexpensive. If these weren't disclosed by the seller I would either send the jacket back or else ask for a partial refund.

On the fit, I'd agree with others that it does look a bit roomy. However, this is a utility jacket for biking in... So if it's comfortable and you like it, that's all that matters! I don't worry much about proper fit with my biking jackets--just so long as they're the right length in the body and sleeves, can be zipped, and are reasonably right, I'm happy!
 
Last edited:

ProteinNerd

My Mail is Forwarded Here
Messages
3,902
Location
Sydney
As others have said, nice jacket but you could find one with a better fit imo plus add the required repairs, I’d send it back.
 

Forum statistics

Threads
109,250
Messages
3,077,310
Members
54,183
Latest member
UrbanGraveDave
Top