Corky
Practically Family
- Messages
- 507
- Location
- West Los Angeles
For those of you who think there is something less than masculine about sewing buttons on properly: I learned to sew from my Old Man. He learned these techniques as an American volunteer in the Canadian Army in World War One. The units he was in tended to get decimated and the survivors put into other units so often that he became fairly accomplished at sewing on new unit patches and buttons.
This technique is particularly useful for sewing on coat buttons and suspender buttons.
Instructions for sewing on a button:
You'll Need:
* Buttons
* Spool of Button and Carpet Thread
* Scissors
* Some chalk or a pencil to mark position of buttons before you start
Don't try to rush this procedure. You're going to get stuck now and then.
Step1 - Choose the right button.
Step2 -Choose Button and Carpet thread close to the color of the material.
Step3 - Cut a piece of thread about a yard or two long (span between outstretched hands) for two button attachments.
Step4 -Thread the needle, feeding the thread through the eyehole. (Self-threading needles are God's gift to many of us.)
Step5 - After the thread is through the eyehole, move the needle to the middle of the thread and fold the thread in half. Tie an overhand knot at the end of the thread, where the ends of the thread meet. The thread should now be doubled and ready to sew.
Step6 - Mark the places where the buttons are to go with a pencil or a piece of chalk.
Step7 - Place the button on top of the material where you intend to sew it into place. You can put a match or a coin between the button and the material to give it the necessary slack.
Step8 - From under the material, push the needle up through the material and one of the holes on the button. Pull all the way through until the knot is about an inch from against the material. You will pass the needle through that loop with the knot when it comes back down to lock the button in place.
Step - Push the needle diagonally down through the next hole on the button and through the material and through the one inch loop on the back. Pull the thread tight from the top to lock your thread in the bottom loop to fix your first stitch in place.
Step9 - Repeat previous step from under the material, push the needle up through the material and go back diagonally through the vacant hole on the button so that the threads forms an X pattern.
Step 10 - Repeat steps 9 and 8 once more , going up and down through the hole on the button and through the material, so that each hole is secured by an X made of double strands of thread. End this step with the thread emerging from the fabric on the button side, just a bit away from the other threads.
Step 11 - The key step: grasp the fabric under the button firmly with your left thumb and forefinger and with your right hand tightly wrap the loose end of the thread around the threads connecting the button to the fabric THREE TIMES between the button and the material, then pass the needle through the wraps of thread and pull the needle and thread out the other side.
Step 12 - Repeat the previous step, wrap the loose end of the thread around the threads that connect the button to the fabric three times and then poke the needle through the middle of the wrap and pull the thread tight two more times.
Step 13 - Cut off the thread close to the button and knot the end of the thread which is still connected to the needle for use on the next button.
This technique is particularly useful for sewing on coat buttons and suspender buttons.
Instructions for sewing on a button:
You'll Need:
* Buttons
* Spool of Button and Carpet Thread
* Scissors
* Some chalk or a pencil to mark position of buttons before you start
Don't try to rush this procedure. You're going to get stuck now and then.
Step1 - Choose the right button.
Step2 -Choose Button and Carpet thread close to the color of the material.
Step3 - Cut a piece of thread about a yard or two long (span between outstretched hands) for two button attachments.
Step4 -Thread the needle, feeding the thread through the eyehole. (Self-threading needles are God's gift to many of us.)
Step5 - After the thread is through the eyehole, move the needle to the middle of the thread and fold the thread in half. Tie an overhand knot at the end of the thread, where the ends of the thread meet. The thread should now be doubled and ready to sew.
Step6 - Mark the places where the buttons are to go with a pencil or a piece of chalk.
Step7 - Place the button on top of the material where you intend to sew it into place. You can put a match or a coin between the button and the material to give it the necessary slack.
Step8 - From under the material, push the needle up through the material and one of the holes on the button. Pull all the way through until the knot is about an inch from against the material. You will pass the needle through that loop with the knot when it comes back down to lock the button in place.
Step - Push the needle diagonally down through the next hole on the button and through the material and through the one inch loop on the back. Pull the thread tight from the top to lock your thread in the bottom loop to fix your first stitch in place.
Step9 - Repeat previous step from under the material, push the needle up through the material and go back diagonally through the vacant hole on the button so that the threads forms an X pattern.
Step 10 - Repeat steps 9 and 8 once more , going up and down through the hole on the button and through the material, so that each hole is secured by an X made of double strands of thread. End this step with the thread emerging from the fabric on the button side, just a bit away from the other threads.
Step 11 - The key step: grasp the fabric under the button firmly with your left thumb and forefinger and with your right hand tightly wrap the loose end of the thread around the threads connecting the button to the fabric THREE TIMES between the button and the material, then pass the needle through the wraps of thread and pull the needle and thread out the other side.
Step 12 - Repeat the previous step, wrap the loose end of the thread around the threads that connect the button to the fabric three times and then poke the needle through the middle of the wrap and pull the thread tight two more times.
Step 13 - Cut off the thread close to the button and knot the end of the thread which is still connected to the needle for use on the next button.