sproily
Practically Family
- Messages
- 723
- Location
- Tampere, Finland
Great! Tip, switch to a smaller button for more authenticity!
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Gentlemen, show us what you've made!
- Thread starter Nick D
- Start date
Giftmacher
One Too Many
- Messages
- 1,405
- Location
- Hohenmauth CZ
I don't want to post new thread and it's really what I made today. I sewed buttons for classic suspenders on trousers which has belt loops and now I'm not sure if it's at least a little correct. How does it look?
Trombone
Familiar Face
- Messages
- 67
- Location
- St. Paul, Minnesota
that button placement looks fine, and don't worry about accurate when it comes to inside or outside, there are many different ways. I think there was a thread here somewhere that showed pants with the button placement where of the 3 pairs of buttons, there was one button inside and one outside in each pair. As long as they keep your pants up 
Shangas
I'll Lock Up
- Messages
- 6,116
- Location
- Melbourne, Australia
Personally I prefer braces buttons to be sewn INSIDE, but there's no hard and fast rules about that stuff. If nothing else, the belt-loops provide a handy guide for button-placement.
Giftmacher
One Too Many
- Messages
- 1,405
- Location
- Hohenmauth CZ
Oh, I meant how looks belt loops when in no use, respectively when in use with button suspenders
Vampyre Master
Vendor
- Messages
- 470
- Location
- North Wales Uk
I have both depends if I wanna show off or look smart, if I wear them outside they godda show!!Oh, I meant how looks belt loops when in no use, respectively when in use with button suspenders
VM
Featured products
-
John Lofgren Monkey Boots Shinki Horsebuttt - $1,136 The classic monkey boot silhouette in an incredibly rich Shinki russet horse leather. -
Grant Stone Diesel Boot Dark Olive Chromexcel - $395 Goodyear welted, Horween Chromexcel, classic good looks. -
Schott 568 Vandals Jacket - $1,250 The classic Perfecto motorcycle jacket, in a very special limited-edition Schott double rider style.
Qirrel
Practically Family
- Messages
- 590
- Location
- The suburbs of Oslo, Norway
A bit long, don't you think?
This is a patchwork I made from other caps of mine, the wool's originally come from coats then cut up for caps and then taken apart and re-cut to a newer design of mine, the bill and button are from a work wear cap made with bull denim cotton.
Last edited:
Shangas
I'll Lock Up
- Messages
- 6,116
- Location
- Melbourne, Australia
Hey guys,
In about a month's time, I'll be attending the Melbourne Pen Show. The exhibit I'm putting on will be a 1920s-30s style desktop display.
This being a pen-show, there's going to be ink...everywhere. And I tend to be a bit accident-prone.
I intend to dress up in 20s-style kit for the day, to complete the look. But I'm a bit worried about my shirtsleeves. The last time I went to the show, I had a minor mishap which resulted in ink on one of my shirtcuffs. Only a small stain, and it came out in the wash...but the threat lingers.
This year, to protect my sleeves, and to complete the period look that I have going on, I was thinking of making a pair of sleeve-protectors. These things:
Does anyone have any pointers about how I should go about making them? I undrestand that they're just made of cotton. I have an old black shirt lying around which nobody wants. I was thinking of taking the fabric from there to make the protectors. I have some elastic cord and such, to make the cinched-in ends of the protectors.
If anyone has any tips, let me know.
I figure it's just a matter of measuring one's forearms, and cutting two lengths of cloth, sewing up the raw edges, turning them into tubes, sewing in the hems and threading in the elastic to make the cinches. Is that about it? Or is it likely to be more complicated than that? Insight is appreciated.
Or can I simply cut the sleeves off the old shirt, hem in the edges, and add the elastic?
In about a month's time, I'll be attending the Melbourne Pen Show. The exhibit I'm putting on will be a 1920s-30s style desktop display.
This being a pen-show, there's going to be ink...everywhere. And I tend to be a bit accident-prone.
I intend to dress up in 20s-style kit for the day, to complete the look. But I'm a bit worried about my shirtsleeves. The last time I went to the show, I had a minor mishap which resulted in ink on one of my shirtcuffs. Only a small stain, and it came out in the wash...but the threat lingers.
This year, to protect my sleeves, and to complete the period look that I have going on, I was thinking of making a pair of sleeve-protectors. These things:
Does anyone have any pointers about how I should go about making them? I undrestand that they're just made of cotton. I have an old black shirt lying around which nobody wants. I was thinking of taking the fabric from there to make the protectors. I have some elastic cord and such, to make the cinched-in ends of the protectors.
If anyone has any tips, let me know.
I figure it's just a matter of measuring one's forearms, and cutting two lengths of cloth, sewing up the raw edges, turning them into tubes, sewing in the hems and threading in the elastic to make the cinches. Is that about it? Or is it likely to be more complicated than that? Insight is appreciated.
Or can I simply cut the sleeves off the old shirt, hem in the edges, and add the elastic?
Last edited:
herringbonekid
I'll Lock Up
- Messages
- 6,016
- Location
- East Sussex, England
gents, i've almost finished a new suit. the fabric is an 18oz mini-herringbone with electric blue pinstripes. the stripes are just over an inch apart. it doesn't have a 40s feel about it, so is most probably 1930s, but could be earlier:
inspiration for the suit:
photos of finished suit will be posted next week.
inspiration for the suit:
photos of finished suit will be posted next week.
Last edited:
