Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Best felt fedora?

Messages
19,001
Location
Central California
I have a Montecristi Custom Hat Works of New Mexico that has the finest beaver fur felt I’ve handed on a western hat (source of the felt is unknown).

The finest dress weight (current production) I’ve seen is the pure beaver Stetson used on the New York LE. I have two of the New York LE hats and the phantom gray has decidedly better felt than the tobacco colored hat. Both are top tier, but the gray is just better. I’d but both of them above way above Winchester’s beaver felt and above the one Optimo (presumably FEPSA beaver), that I’ve handled.

Stetson has a new 2020 Fall City line of hats that includes some new offerings in pure beaver. I’m sorely tempted.



14E62709-76DD-4B6B-BB8C-7E2B591BD5E4.jpeg
85932362-7745-4C10-BD64-5B120477562B.jpeg
 
Messages
10,851
Location
vancouver, canada
The best Felt Fedora entirely depends on one's definition of "best" and the budget to go with it.
In the $850 (and up) range you cannot beat a Rand or O'Farrell in 100% Beaver
In the $150 range Akubra makes a very decent hat...all Rabbit fur.
and in between there are countless options.

Stetson still makes a very nice fedora...take a look at their Stratoliner...$175-$220 depending on where you buy and which specific one you choose. Then there's the option of taking a Stetson Open Road and wearing it with the front brim turned down. Just make sure you opt for the 6x or royal deluxe if you want to go that route. The lower x models are a bit stiff.

I have a 100% Beaver O'Farrell Fedora and it's a hat that will last well beyond my lifetime, beyond my son's, and far into my grand son's. I expect someone will still be wearing it seventy five to a hundred years from now.
It seems as though the Western hat makers can charge so much more than a Fedora custom maker. O'Farrell is at $850 for a Winchester Beaver hat and it is hard to fathom how it could be that much better than something that Art at VS (or any other of the many Master Hatters making fedoras)would have produced for less than half that amount. Greeley Hat Works is similarly priced. It is interesting what the different markets will bear in terms of price points for arguably the exact same item.
 
Messages
10,851
Location
vancouver, canada
I have a Montecristi Custom Hat Works of New Mexico that has the finest beaver fur felt I’ve handed on a western hat (source of the felt is unknown).

The finest dress weight (current production) I’ve seen is the pure beaver Stetson used on the New York LE. I have two of the New York LE hats and the phantom gray has decidedly better felt than the tobacco colored hat. Both are top tier, but the gray is just better. I’d but both of them above way above Winchester’s beaver felt and above the one Optimo (presumably FEPSA beaver), that I’ve handled.

Stetson has a new 2020 Fall City line of hats that includes some new offerings in pure beaver. I’m sorely tempted.



View attachment 209465 View attachment 209466
If only they came open crown. What is the price point for these?
 
Messages
19,001
Location
Central California
It seems as though the Western hat makers can charge so much more than a Fedora custom maker. O'Farrell is at $850 for a Winchester Beaver hat and it is hard to fathom how it could be that much better than something that Art at VS (or any other of the many Master Hatters making fedoras)would have produced for less than half that amount. Greeley Hat Works is similarly priced. It is interesting what the different markets will bear in terms of price points for arguably the exact same item.


Agreed! VS, Phoenix, or Northwest would charge an additional small fee for a western hat, but the big names in western hats charge some crazy money.
 
Messages
10,851
Location
vancouver, canada
Agreed! VS, Phoenix, or Northwest would charge an additional small fee for a western hat, but the big names in western hats charge some crazy money.
And they all appear to be busy with crazy wait lists. I have a 50/50 western weight from NW that was cheaper than a dress weight full beaver. About half way in price between dress weight rabbit and dress weight beaver.
 
Messages
19,426
Location
Funkytown, USA
It seems as though the Western hat makers can charge so much more than a Fedora custom maker. O'Farrell is at $850 for a Winchester Beaver hat and it is hard to fathom how it could be that much better than something that Art at VS (or any other of the many Master Hatters making fedoras)would have produced for less than half that amount. Greeley Hat Works is similarly priced. It is interesting what the different markets will bear in terms of price points for arguably the exact same item.

Oh, heck yeah. I've been in Ft. Worth during the rodeo. Those folks pay top dollar and Peters Bros likely does over half their annual business those two weeks.
 

1961MJS

My Mail is Forwarded Here
Messages
3,370
Location
Norman Oklahoma
You forgot to add they also think stingy brim hats have no room in hat collecting, go figure, but it is laughable.
Hi Hector, I'm not sure if I have a hat collection because I either bought them new from a store, or had Mike Moore, Tony Bruener, Roy Jackson, and Art Fawcett make me one. To me, I view a collection as things that you purchased to look at, not wear. On the other hand, I have quite a few hats. I also don't own any stingy brim hats, and almost no thin ribbon hats. I'm jealous of Bowlerman because he looks GOOD in bowlers and I don't, AND he looks good in wide brim hats (I do too). Why would anyone buy something to wear that they think makes them look bad (except on Halloween) unless they're actually "COLLECTING"?

Later Y'all
 
Messages
19,001
Location
Central California
If only they came open crown. What is the price point for these?

I don’t know. I’m guessing a street price of around $350, but that’s just a guess. I checked and One 2 Mini Ranch doesn’t list them yet and a Google search for “pure open road” didn’t yield anything. I see that the felt is part of their firm line rather than the soft felt id have preferred. I think it would be simple enough to reshape them, but the firm felt isn’t what I’m after. I’m also concerned that the crowns won’t be tall enough.

(edited to reflect that my earlier post about them having “soft” felt was incorrect).
 
Last edited:
Messages
11,378
Location
Alabama
Yes, because those folks whose opinions you do not share deserved to be laughed at.

I don't like 'em, I don't like the way they look on me, and there isn't any room for them in my collection.

Laugh away.

An innocuous comment, Jim, similar to Joao’s “nice, but not for me” or “not enough brim” for anything under 3”. Maybe annoying to some but never personally taken.

Yet, it went from that to it being an attack on stingy brims and those who wear them and actually ostracizing them. That is what’s laughable and another of the many things that drive me further from this place every day. I don’t like stingy brims, either but I’ve sold or given every one of them away because I knew they would be worn by the folks they went to. Guess I should have burned them since I don’t like them.
 
Messages
19,426
Location
Funkytown, USA
An innocuous comment, Jim, similar to Joao’s “nice, but not for me” or “not enough brim” for anything under 3”. Maybe annoying to some but never personally taken.

Yet, it went from that to it being an attack on stingy brims and those who wear them and actually ostracizing them. That is what’s laughable and another of the many things that drive me further from this place every day. I don’t like stingy brims, either but I’ve sold or given every one of them away because I knew they would be worn by the folks they went to. Guess I should have burned them since I don’t like them.

I'm not so keen on Westerns either, but you're welcome under my humble roof anytime.

You can even put your fab boots up on the coffee table!
 
I’m also concerned that the crowns won’t be tall enough. (edited to reflect that my earlier post about them having “soft” felt was incorrect).
You guys got me all worked up on this one thinking Stetson was offering a cool new OR in beaver.............but when I looked them up......they are listed having the same low crown dimensions of their other modern OR offerings.........disappointing indeed!!!!
 

Blackthorn

I'll Lock Up
Messages
4,568
Location
Oroville
I always find it odd that people assume that a strong opinion MUST mean that the person who holds said idea hates everyone who doesn't hold that idea. Yes, I hate stingy brims. Yes, I hate woolies. I would never have them in my collection and find buying them a waste of money. Yes, I get annoyed at all those people who go nuts at the danged Indiana Jones hat. HOWEVER, that does not mean I discount, hate, or look down on anyone who like those things. Strong opinions are good. But they don't necessarily translate to hostility toward people who hold opposing strong opinions. I have my strong opinions, others have theirs, but we can all still get along just fine, regardless. Can't we?
Yes we can!
 

Jerm

New in Town
Messages
32
I have a Montecristi Custom Hat Works of New Mexico that has the finest beaver fur felt I’ve handed on a western hat (source of the felt is unknown).

The finest dress weight (current production) I’ve seen is the pure beaver Stetson used on the New York LE. I have two of the New York LE hats and the phantom gray has decidedly better felt than the tobacco colored hat. Both are top tier, but the gray is just better. I’d but both of them above way above Winchester’s beaver felt and above the one Optimo (presumably FEPSA beaver), that I’ve handled.

Stetson has a new 2020 Fall City line of hats that includes some new offerings in pure beaver. I’m sorely tempted.



View attachment 209465 View attachment 209466





Looks like a great lineup
 

Forum statistics

Threads
109,269
Messages
3,077,656
Members
54,221
Latest member
magyara
Top