Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Banky

One of the Regulars
Messages
227
Location
Milwaukee, WI
That's the situation with this hat, very supple, shapes without any need for steam. That's also pretty much the approach I've taken, formed it into a shape I like and have left it alone. Just wanted to make certain I was caring for it properly as I don't have a very expansive collection as yet and this is pretty much my star of the collection to date. I picked it up more as a collectors piece knowing approximately it's age and rarity but as I said I've grown quite fond of it and have taken to wearing it quite often.
 

Jedwbpm

One Too Many
Messages
1,031
Location
West Coast Florida
Hi Swanky. The shape of all the gun clubs by stetson are the same except for the royal flush which has a gambler shape. The difference is in the color and hat bands and edge Finnish. they are nice hats. I like the Akubra Snowy River the crown is not as high though. The Lightning Ridge from Akubra is also very nice.

The Whippet that Stetson makes now I like alot. The tawny color is great. Older hats are better by far but depending on your size can cost a fortune. I try on most of the hats that come into the shop that are near my size to check the sizing . When I put on a Gun Club I say that looks nice. When I put on a Whippet I say I wont one.

Jeff
Living the Dream at
DelMonico Hatter
 
Messages
10,524
Location
DnD Ranch, Cherokee County, GA
That's the situation with this hat, very supple, shapes without any need for steam. That's also pretty much the approach I've taken, formed it into a shape I like and have left it alone. Just wanted to make certain I was caring for it properly as I don't have a very expansive collection as yet and this is pretty much my star of the collection to date. I picked it up more as a collectors piece knowing approximately it's age and rarity but as I said I've grown quite fond of it and have taken to wearing it quite often.

I have an early 50s Borso Alessandria (thin ribbon, bound edge) that I store open crown.
I shape it with each wearing but don't change the crease after that until I go back to open crown to put in the box.
I do all this dry, no steam. Steam can activate the shellac & "set" the crease.
I don't do "hard" or sharp folds & I don't put it on or take it off by the pinch.
Flexing at the same spot over & over again will wear that spot, just look at Johnny Depp's hat.
They don't make felt like this anymore at Borsalino.
 
Messages
10,575
Location
Boston area
Howdy all!
In an email exchange with another, newer Lounge member, it became apparent that there might be need to dig up the old thread roughly titled "What to tell your wife when she asks if you got another hat." I wasn't successful through any Google search, but maybe I have the thread name wrong, etc. Anybody remember that one, or have a better search engine? We must save this poor man!
 

TomS

One Too Many
Messages
1,202
Location
USA.
Hi Folks:
I have a felt fedora that's a bit more pliable than I'd like. I'm curious, is there something I can do to stiffen the felt a bit? Any sggestions are appreciated.
Thanks,
Tom
 

splintercellsz

I'll Lock Up
Messages
6,141
Location
Somewhere in Time
For photos, you need to upload them to an external site, such as: http://imageshack.us/

Then you post the
link here, and the pictures will show up!
 

Hatinterest

New in Town
Messages
1
Location
United States

bond

My Mail is Forwarded Here
Messages
3,535
Location
Third coast
Just bought a 40-50s Stetson hburg that has printing on sweat band that says "made In England" under license to Stetson and store stamp from Sweden . Any one know what hat maker in uk was under license with Stetson . Have not received hat yet but will post pics when I can.
Thanks
 
Messages
10,575
Location
Boston area
Thought I'd wave the flag on this one again. Anybody remember this at all, and if so should we admit to reading through it?

Howdy all!
In an email exchange with another, newer Lounge member, it became apparent that there might be need to dig up the old thread roughly titled "What to tell your wife when she asks if you got another hat." I wasn't successful through any Google search, but maybe I have the thread name wrong, etc. Anybody remember that one, or have a better search engine? We must save this poor man!
 

kasha

New in Town
Messages
1
Location
Kent OH
"The Chief Executive" LBJ hat

Good day, Fedora Lounge folks -- here's hoping I'm posting these questions to all of you correctly! I bought the hat pictured here at an auction last week (along with a 1960s Stetson Open Road, which I was able to date thanks to your website!) and am curious why it's nearly impossible to find info about it anywhere on the internet. Last night I resorted to searching via google news archives and came up with the accompanying article from 1964 stating that Hat Corporation of America would be producing a model called "The LBJ." Can any of you tell from the markings on this hat whether it's the one made by Hat Corp.? Is this hat collectible/valuable? Thanks for any info you can provide!

Here are some details: There's a metal pin of a cowboy hat and the initials "LBJ" on the outside of the hat. The liner reads "The Chief Executive" over an image of the U.S. Capitol dome. Stamped on the sweatband in white is "The LBJ," but it's too faded to photograph (I tried!). Stamped in gold on the hat, under the sweatband near the size label, is what looks like a "G," but I'm not sure. The underside of the liner is stamped "A718" in red and on the underside of the sweatband is "711 xx" written in what looks like yellow chalk.

LBJ1_zpsfe7bae2a.jpg


LBJ2_zpse5537751.jpg


LBJ3_zps05e55446.jpg


LBJ4_zps8c7b942b.jpg


LBJ5_zps03e6f58e.jpg


TheLBJHat2-28-64_zps61c392f0.jpg
 
Last edited:

Brad Bowers

I'll Lock Up
Messages
4,187
None of the details match Hat Corporation of America hats from the same period, so it's doubtful that it's that particular model. It might have come from one of the large factories in Danbury who did jobber work.

Brad
 

Forum statistics

Threads
108,995
Messages
3,072,338
Members
54,039
Latest member
GloriaJama
Top