Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Aero 1401P A-2- repairing a bad finish

fishmeok

Vendor
Messages
759
Location
minneapolis
I bought the A-2 off e-bay with some unmentionable nose art painted on that I immediately removed with windex per Jerome's (on the VLJ) advice. This removed the objectionable but left a large area of removed finish. I also ran the jacket through the wash and wore it until dry to help remove some serious smokers odor (worked very well, I can wear it without my eyes watering). Again following Jerome's advice I bought some Createx acrylic airbrush paint (transparent brown, green, and red) and attempted to blend the really bad areas in with the rest of the jacket. I was originally going to use my airbrush but decided to try the sponge method instead (or in my case, old sock)- wiping the area down with thinned paint, adding several layers until I reach the desired effect. I mixed and thinned the paint and applied the layers, tweaking the color as the jacket dried after each layer. I stopped after about 5 wipedowns to let the jacket thoroughly dry overnight. According to the manufacturer Createx sets best with heat, so the jacket has been out drying in the 90 degree sun for a few hours now.

I'm pretty happy with the results, I had originally thought I would have to add more layers tomorrow but I think I will stop while I'm ahead.

Cheers
Mark

Before re-blending;
DSCN1279.jpg


DSCN1300.jpg


And After

DSCN1307.jpg


DSCN1305.jpg


DSCN1306.jpg
 

scotrace

Head Bartender
Staff member
Messages
14,392
Location
Small Town Ohio, USA
Initially, I thought "this jacket has been way to messed with." But it looks like you matched it up well, returning it to the way it left the sewing tables. Nice work.
 

Forum statistics

Threads
109,311
Messages
3,078,651
Members
54,243
Latest member
seeldoger47
Top