Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

T. Jones Custom Hats, Repairs, and Conversions

T Jones

I'll Lock Up
Messages
6,786
Location
Central Ohio
That's a beauty, Terry. The ribbon collr really pops.



.
It sure is, Randy. Those colors do pop. I think Brent did a real good job on these color choices. The gray ribbon is a vintage French silk grosgrain and the brim binding is also a vintage French silk ribbon in "Dusty Blue Periwinkle". I added some of that periwinkle as an accent color to the bow keeper and also made a sweatband bow out of it too. Brent did good on this one.
 

Attachments

  • IMG_20231028_083657521.jpg
    IMG_20231028_083657521.jpg
    1.9 MB · Views: 108
  • IMG_20231028_084004964.jpg
    IMG_20231028_084004964.jpg
    1.9 MB · Views: 100
  • Screenshot_20231028-123620.png
    Screenshot_20231028-123620.png
    2.3 MB · Views: 94

T Jones

I'll Lock Up
Messages
6,786
Location
Central Ohio
I had a little down time waiting for materials so I was able to finally finish my custom Western that I started about 6 weeks ago or so. The color is Carbon Steel. From start to finish in pictures:

Raw-Felt-in-Steel-2.jpg


Raw-Felt-In-Steel-1.jpg


The open crown on this is 6 inches. I trimmed the brim to 3 1/2 inches in proportion to the crown height. Sweat band is sewn in.
Carbon-Steel-Western-Project-1.jpg


I went with a Cattleman crease and a curled Western brim. I chose a black 3/8 ribbon with an OR style bow.
Carbon-Steel-Western-Project-14.jpg


Choosing between a couple of Stetson liners that I salvaged to go into this hat until I can come up with some of my own.
Carbon-Steel-Western-Project-13.jpg


New Sweat and sweat band bow that I made from the black 3/8 ribbon I used on the hat. Liner is in.
Carbon-Steel-Western-Project-5.jpg


All put together.
Carbon-Steel-Western-Project-11.jpg


Carbon-Steel-Western-Project-10.jpg


Carbon-Steel-Western-Project-8.jpg


Carbon-Steel-Western-Project-6.jpg



...and now I'm back to work finishing up on a previous custom that I started.
 

Rmccamey

I'll Lock Up
Messages
5,831
Location
Central Texas
Another classic, Terry.

I had a little down time waiting for materials so I was able to finally finish my custom Western that I started about 6 weeks ago or so. The color is Carbon Steel. From start to finish in pictures:

Raw-Felt-in-Steel-2.jpg


Raw-Felt-In-Steel-1.jpg


The open crown on this is 6 inches. I trimmed the brim to 3 1/2 inches in proportion to the crown height. Sweat band is sewn in.
Carbon-Steel-Western-Project-1.jpg


I went with a Cattleman crease and a curled Western brim. I chose a black 3/8 ribbon with an OR style bow.
Carbon-Steel-Western-Project-14.jpg


Choosing between a couple of Stetson liners that I salvaged to go into this hat until I can come up with some of my own.
Carbon-Steel-Western-Project-13.jpg


New Sweat and sweat band bow that I made from the black 3/8 ribbon I used on the hat. Liner is in.
Carbon-Steel-Western-Project-5.jpg


All put together.
Carbon-Steel-Western-Project-11.jpg


Carbon-Steel-Western-Project-10.jpg


Carbon-Steel-Western-Project-8.jpg


Carbon-Steel-Western-Project-6.jpg



...and now I'm back to work finishing up on a previous custom that I started.
 
Messages
10,830
Location
vancouver, canada
I had a little down time waiting for materials so I was able to finally finish my custom Western that I started about 6 weeks ago or so. The color is Carbon Steel. From start to finish in pictures:

Raw-Felt-in-Steel-2.jpg


Raw-Felt-In-Steel-1.jpg


The open crown on this is 6 inches. I trimmed the brim to 3 1/2 inches in proportion to the crown height. Sweat band is sewn in.
Carbon-Steel-Western-Project-1.jpg


I went with a Cattleman crease and a curled Western brim. I chose a black 3/8 ribbon with an OR style bow.
Carbon-Steel-Western-Project-14.jpg


Choosing between a couple of Stetson liners that I salvaged to go into this hat until I can come up with some of my own.
Carbon-Steel-Western-Project-13.jpg


New Sweat and sweat band bow that I made from the black 3/8 ribbon I used on the hat. Liner is in.
Carbon-Steel-Western-Project-5.jpg


All put together.
Carbon-Steel-Western-Project-11.jpg


Carbon-Steel-Western-Project-10.jpg


Carbon-Steel-Western-Project-8.jpg


Carbon-Steel-Western-Project-6.jpg



...and now I'm back to work finishing up on a previous custom that I started.
If you want to sew your own liners I have templates for all the different sizes that I can send to you.
 

T Jones

I'll Lock Up
Messages
6,786
Location
Central Ohio
If anyone is looking for a good candidate for a conversion I have a Dobbs Rancher Twenty in size 7 that has mothing on the crown, but the brim is OK. If it was close to my size I would send it to Terry to be flipped inside-out and (maybe) converted to a fedora. I'm OK with it staying a western too.

https://www.ebay.com/itm/126173609171
That's a nice one Bob. It's one of my favorite Western styles too. I see the mothing but from the pictures it doesn't look like any of it went through. It still looks like a solid hat on my end.
 

T Jones

I'll Lock Up
Messages
6,786
Location
Central Ohio
FEPSA is close to opening their own e commerce site where we can buy direct from them I am hoping the price comes down to a more reasonable level.
The site should have opened this week but it stills says coming soon.
That would be nice. Yeah, hopefully those prices will go down when they start their e commerce site. Everything from groceries to gas is just too high these days.
 
Messages
19,001
Location
Central California
My hat arrived early! Than never happens. Terry has flanges, but not in my huge size. He sent me the hat with the brim un-flanged and I’ll accomplish that duty myself. The felt is FEPSA 100% rabbit and the color is “pale blue.” I think it’s the same color Tim at pure beaver also calls “pale whale.” The open crown is 6” or maybe a 1/16” over. The bound edge brim is 3 ⅛ “ wide. The block is from Hatters Supply House of Colorado. It’s a size 7 ⅞ #52 long oval with an 6 1/4” (ish) height. Everything about this hat shows great attention to detail. I’ll post more photos after it’s flanged and shaped.

To my eye, contrasting colors on the bow keeper can look garish if overdone. Terry kept it subtle and classy.

The felt is wonderful with a great hand. The felt will need some steam to hold a shape and it currently has quite a bit of spring back. It may be rabbit, but it’s some pretty incredible Felt. The brim is significantly firmer, but not in a bad way. It’s just right to hold its shape once flanged and provide structure to the hat. The brim is not in any way harsh or approaching to firmness of say a modern Stetson Royal DeLuxe.

IMG_5806.jpeg
IMG_5805.jpeg
IMG_5808.jpeg
IMG_5809.jpeg
IMG_5807.jpeg


Thank you, Terry! I can’t wait for my other hats.
 

Forum statistics

Threads
109,031
Messages
3,073,124
Members
54,037
Latest member
GloriaJama
Top