- Messages
- 54,308
habberdasher said:
I don't think that was at all unusual back then. They learned and with repetition come speed and skill.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
How to do It: Stiff Starch Grandma's Way
- Thread starter scotrace
- Start date
I don't think that was at all unusual back then. They learned and with repetition come speed and skill.
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
habberdasher
A-List Customer
- Messages
- 369
- Location
- Mt Pleasant, SC
jamespowers said:I don't think that was at all unusual back then. They learned and with repetition come speed and skill.
Strange.
- Messages
- 54,308
habberdasher said:
Try it for about 30 years and see.
Mr Vim
One Too Many
- Messages
- 1,306
- Location
- Juneau, Alaska
Back when I was in the Army, we a crazy process for starching our uniforms, and then we would have contests on whose blouse had the best starch.
If your blouse could stand up by itself for five minutes without collapsing, you won... good times.
If your blouse could stand up by itself for five minutes without collapsing, you won... good times.
- Messages
- 54,308
Mr Vim said:
That is about the standard I use for my shirts as well.
Honey Bee
One of the Regulars
- Messages
- 204
- Location
- Northern California
Where did the pictures go?
Nick D
Call Me a Cab
- Messages
- 2,166
- Location
- Upper Michigan
Yesterday I cleaned and starched almost all of my detachable shirt collars using the instructions on the back of an old Van Heusen collar wrapper, and it's given me the best results of any technique I've tried. This isn't for 2x4 stiff collars, I added more starch for my club collars which I like very stiff, but point collars I think are better softer.
WASHING
Wash as usual with good quality soap flakes. If necessary brush lightly with a soft brush, but avoid using bleaching preparations. If heavily soiled, soak the collars overnight to loosen the dirt. After washing, white Van Heusen collars may be boiled occassionally for half an hour using sufficient soap flakes to make a good lather. Thorough rinsing in hot water is essential on account of the density of the fabric. In the last rinse for white collars use Reckitts Blue.
GLOSS
To obtain a glossy surface, the collar should, after rinsing, be immersed for 2 or 3 minutes in a weak solution of starch. Make up starch as follows: Mix 1 tablespoonful of Robin Starch into a smooth cream with cold water, then add 1 pint of boiling water, stirring steadily, and cool down with 1/2 pint of cold water, or in equal proportions. The collar should then be dipped in clear, warm water, to remove excess starch from the face.
IRONING
Place the collar flat, face side up, and iron in a very damp condition with a hot iron. Iron briskly across the collar (not lengthwise) incresing pressure as collar becomes drier until a satisfactory gloss is obtained on the surface. Fold by hand only.
I don't have Robin Starch, but I do have Reckitts Blue. This works on other collars than Van Heusen, I also did it on Rocolla, Radiac, and a couple unmarked collars. I could use a polishing iron to get a better gloss, but they came out nice and smooth.
WASHING
Wash as usual with good quality soap flakes. If necessary brush lightly with a soft brush, but avoid using bleaching preparations. If heavily soiled, soak the collars overnight to loosen the dirt. After washing, white Van Heusen collars may be boiled occassionally for half an hour using sufficient soap flakes to make a good lather. Thorough rinsing in hot water is essential on account of the density of the fabric. In the last rinse for white collars use Reckitts Blue.
GLOSS
To obtain a glossy surface, the collar should, after rinsing, be immersed for 2 or 3 minutes in a weak solution of starch. Make up starch as follows: Mix 1 tablespoonful of Robin Starch into a smooth cream with cold water, then add 1 pint of boiling water, stirring steadily, and cool down with 1/2 pint of cold water, or in equal proportions. The collar should then be dipped in clear, warm water, to remove excess starch from the face.
IRONING
Place the collar flat, face side up, and iron in a very damp condition with a hot iron. Iron briskly across the collar (not lengthwise) incresing pressure as collar becomes drier until a satisfactory gloss is obtained on the surface. Fold by hand only.
I don't have Robin Starch, but I do have Reckitts Blue. This works on other collars than Van Heusen, I also did it on Rocolla, Radiac, and a couple unmarked collars. I could use a polishing iron to get a better gloss, but they came out nice and smooth.
- Messages
- 14,392
- Location
- Small Town Ohio, USA
Right. With thanks to my daughter and her mum for helping recover them, this thread now has all its pictures restored. Whew.
- Messages
- 3,661
Thank you!! One of the best threads in the history of the Lounge.
Sir RBH
A-List Customer
- Messages
- 314
- Location
- Herefordshire, England
Thank you for sharing.. will give that a go!!
Seraph1227
One of the Regulars
- Messages
- 155
- Location
- Granbury Texas
Wow, this tutorial was great...more, more.
Is there any secret as to how to get the collars really stiff? Does increasing the starch-to-water ratio make any difference? I cannot quite get my collars back to how stiff they were originally... they do get back that cardboard feeling, but are not as stiff as I would want them to be. Any help is appreciated!
