- Messages
- 10,883
- Location
- Portage, Wis.
Tough times, financial turmoil, and health issues have forced my hands. My baby has to go.
For your consideration, I have my 1958 Chevrolet Delray 4-door post. This car was a 235 straight six and three on the tree from the factory. It currently has a 327 with a TH400 in it. The Numbers Engine and Transmission come with it.
More photos available:
http://s575.photobucket.com/albums/ss196/1958_Delray/
Body:
The car is Green with a white top and has a green/dark green interior. The body is very solid and all there. Will need some body work, but is very rust free. Everything is there except for the side trim and drivers window glass. The windshield and passenger vent window will also need to be replaced.
Engine:
The engine is a 327 out of a 1968 Chevy C30 truck. The truck was a one-owner with 60,000 original miles. The motor ran great in the truck and when I put the new gaskets on, everything was very clean on the inside. It is set up for a 2-barrel Rochester carb, which comes with the car. Also, a 4-barrel intake comes along with this if you wish to go that route. The engine is not completely put together at this point, but all the parts come with it to finish the project. Also, bolted up to the engine is a TH400 transmission which is like new, out of an 89 Chevy van. The driveshaft will need to be shotrened, or a shorter one off a different vehicle would also work. Included is the stock driveshaft and one off of the 68 Chevy truck.
Interior:
The interior will need to be redone. The seat covers are there, and usable, but are a bit soiled and have some small rips at the seams. There is no carpet, headliner, or door panels. There are new front floor-pans and a new glovebox liner.
Extras:
I have many extras for this car which come with it.
Stock 235 engine (complete and rebuilt) with 3 speed manual transmission.
An additional 235 Engine (seized) for parts from a 1958 Chevy panel truck.
4-speed, I beleive it's a Borg-Warner transmission with extra shaft for grain box from 1968 Chevy truck.
Steering Column
Shocks
And much more.
If you don't feel like hauling these parts away, I can keep them as well, I know sometimes we don't need the extras, but they're available if wanted.
If you have any questions, (Bartender edit: PM this gentleman for information. Personal stuff has been edited - better safe than sorry).
Would consider trading for a 4x4, station wagon, or another vehicle of interest.
Make me an offer and Thanks for reading!
-Tom
For your consideration, I have my 1958 Chevrolet Delray 4-door post. This car was a 235 straight six and three on the tree from the factory. It currently has a 327 with a TH400 in it. The Numbers Engine and Transmission come with it.
More photos available:
http://s575.photobucket.com/albums/ss196/1958_Delray/
Body:
The car is Green with a white top and has a green/dark green interior. The body is very solid and all there. Will need some body work, but is very rust free. Everything is there except for the side trim and drivers window glass. The windshield and passenger vent window will also need to be replaced.
Engine:
The engine is a 327 out of a 1968 Chevy C30 truck. The truck was a one-owner with 60,000 original miles. The motor ran great in the truck and when I put the new gaskets on, everything was very clean on the inside. It is set up for a 2-barrel Rochester carb, which comes with the car. Also, a 4-barrel intake comes along with this if you wish to go that route. The engine is not completely put together at this point, but all the parts come with it to finish the project. Also, bolted up to the engine is a TH400 transmission which is like new, out of an 89 Chevy van. The driveshaft will need to be shotrened, or a shorter one off a different vehicle would also work. Included is the stock driveshaft and one off of the 68 Chevy truck.
Interior:
The interior will need to be redone. The seat covers are there, and usable, but are a bit soiled and have some small rips at the seams. There is no carpet, headliner, or door panels. There are new front floor-pans and a new glovebox liner.
Extras:
I have many extras for this car which come with it.
Stock 235 engine (complete and rebuilt) with 3 speed manual transmission.
An additional 235 Engine (seized) for parts from a 1958 Chevy panel truck.
4-speed, I beleive it's a Borg-Warner transmission with extra shaft for grain box from 1968 Chevy truck.
Steering Column
Shocks
And much more.
If you don't feel like hauling these parts away, I can keep them as well, I know sometimes we don't need the extras, but they're available if wanted.
If you have any questions, (Bartender edit: PM this gentleman for information. Personal stuff has been edited - better safe than sorry).
Would consider trading for a 4x4, station wagon, or another vehicle of interest.
Make me an offer and Thanks for reading!
-Tom
